PeakTech P1072 True RMS Smart Digitalt Multimeter Brugermanual

Indledning

The PeakTech P1072 is a compact, smart True RMS digital multimeter designed for accurate electrical measurements. It features automatic function recognition (Auto-Scan) and auto-ranging, simplifying operation for various tasks. This device is suitable for students, technicians, and DIY enthusiasts, offering a wide range of measurement functions including voltage, resistance, continuity, diode test, and temperature.

Sikkerhedsoplysninger

Always observe standard safety precautions when using electrical testing equipment. This multimeter is rated for CAT III 600 V, indicating its suitability for measurements in building installations. Ensure the device and test leads are in good condition before use. Do not attempt to measure voltages exceeding the specified limits.

• Brug ikke enheden, hvis den ser beskadiget ud.
• Ensure correct connection of test leads for each measurement.
• Undgå kontakt med strømførende kredsløb.
• Udskift batterierne med det samme, når indikatoren for lavt batteri vises.

Pakkens indhold

Bekræft at alle varer er til stede i pakken:

• PeakTech P1072 Digital Multimeter
• Testledninger (røde og sorte)
• Temperatursensor
• AAA-batterier (2x)
• Instruktionsmanual

Image: The PeakTech P1072 multimeter shown with its included test leads, temperature sensor, and two AAA batteries.

Produkt overview

Familiarize yourself with the components of your PeakTech P1072 multimeter:

Image: A detailed diagram highlighting the LCD display, function buttons, input jacks, NCV sensor, and LED light on the PeakTech P1072 multimeter.

• LCD-skærm: 4000 count display with blue backlight for clear readings. Changes to red for NCV or Live Test detection.
• O/FUNC Button: Power On/Off and function selection in certain modes.
• HOLD/* Button: Freezes the current reading on the display. Also activates the backlight/LED flashlight.
• Indgangsstik:
  • COM (Fælles): For black test lead.
  • VΩHzLIVE: For red test lead for voltage, resistance, frequency, Live Test, diode, continuity, and temperature measurements.
• NCV-sensor: Located at the top for non-contact voltage afsløring.
• LED lys: Integrated flashlight on the back for illuminating dark work areas.
• Stativ: Foldable stand on the back for hands-free operation.

Opsætning

1. Batteriinstallation

The multimeter requires two AAA batteries. To install or replace them:

1. Sørg for, at multimeteret er slukket, og at testledningerne er frakoblet.
2. Find batterirummet på bagsiden af ​​enheden.
3. Open the battery cover using a screwdriver if necessary.
4. Isæt to AAA-batterier, og overhold den korrekte polaritet (+/-).
5. Luk batteridækslet forsvarligt.

2. Tilslutning af testledninger

Connect the test leads as follows for most measurements:

• Indsæt den sorte testledning i KOM stik.
• Indsæt den røde testledning i VΩHzLIVE stik.

Betjeningsvejledning

Tænd/sluk

Tryk på O/FUNC button to turn the multimeter on. Press and hold the O/FUNC button for approximately 5 seconds to turn it off.

Auto-Scan and Auto-Range Function

The P1072 features an intelligent AUTO-SCANNING function. When powered on, the device automatically detects the type of measurement (AC/DC voltage, resistance, continuity) based on the connected circuit. The AUTO-RANGE function automatically selects the appropriate measurement range for optimal accuracy.

Image: The PeakTech P1072 multimeter in use, demonstrating its ability to measure voltage, resistance, frequency, capacitance, diode, and temperature.

Målefunktioner

• Voltage Measurement (ACV/DCV):

  Connect the test leads to the circuit in parallel. The multimeter will automatically detect AC or DC voltage. Max input: 600V AC/DC.
• Modstandsmåling (Ω):

  Sørg for, at kredsløbet er spændingsløst. Tilslut testledningerne på tværs af komponenten for at måle modstanden.

• Kontinuitetstest ()))):

  For checking circuit continuity. If resistance is below a certain threshold, an audible beep will sound.

• Diode Test (→|):

  Tilslut testledningerne over dioden. Displayet vil vise den fremadrettede lydstyrketage drop.
• Temperature Measurement (°C):

  Connect the included temperature sensor to the VΩHzLIVE and COM jacks. The display will show the temperature reading.

• Kapacitansmåling (F):

  Ensure the capacitor is discharged before testing. Connect the test leads across the capacitor terminals.

• Frekvensmåling (Hz):

  Connect the test leads to the signal source. The multimeter will display the frequency.
• NCV (Non-Contact Voltage) Detektion:

  Hold den øverste del af multimeteret nær en strømførende vekselstrømsspænding.tage source. The display backlight will turn red, and an audible alarm will sound if voltage er opdaget.

• LIVE test:

  Insert the red test lead into the VΩHzLIVE jack and touch the probe to a live conductor. The display backlight will turn red, indicating a live phase. The black lead is not used for this test.

HOLD Function and Backlight/LED

Tryk på HOLD/* button briefly to freeze the current reading on the display. Press it again to release. Press and hold the HOLD/* button to activate the display backlight and the integrated LED flashlight. Press and hold again to turn them off.

Opretholdelse

Udskiftning af batteri

When the low battery indicator appears on the display, replace the batteries as described in the "Setup" section to ensure accurate measurements.

Rensning

Tør enheden af ​​med annonceamp klud og et mildt rengøringsmiddel. Brug ikke slibemidler eller opløsningsmidler. Sørg for, at enheden er helt tør, før den tages i brug.

Fejlfinding

Specifikationer

Garanti og support

The PeakTech P1072 Digital Multimeter comes with a 3 års producentgaranti. For technical support, service, or warranty claims, please contact your retailer or PeakTech customer service. Refer to the official PeakTech webhjemmeside for kontaktoplysninger og yderligere ressourcer.

For mere information, besøg PeakTech Brand Store.