Mecpow P150 Fume Extractor User Manual

1. Introduktion

Thank you for choosing the Mecpow P150 Fume Extractor. This device is designed to effectively remove smoke, dust, and harmful gases from your workspace, providing a cleaner and safer environment. Featuring a 150W motor, 3-layer filtration system, and adjustable suction, the P150 is suitable for various applications including laser engraving, soldering, and other processes generating airborne contaminants.

Please read this manual thoroughly before operating the unit to ensure proper use, maintenance, and safety.

Figure 1: Mecpow P150 Fume Extractor in operation, demonstrating smoke extraction.

2. Sikkerhedsinstruktioner

For at forhindre personskade eller beskadigelse skal du overholde følgende sikkerhedsforanstaltninger:

• Tilslut altid enheden til en jordforbundet stikkontakt.
• Do not operate the unit in wet conditions or with wet hands.
• Sørg for korrekt ventilation omkring enheden for at forhindre overophedning.
• Hold børn og kæledyr væk fra betjeningsenheden.
• Bloker ikke luftindtaget eller -udtaget under drift.
• Turn off and unplug the unit before performing any maintenance or filter replacement.
• Use only genuine Mecpow replacement filters.
• If any unusual noise, smell, or smoke occurs, immediately turn off and unplug the unit.

3. Produktet er slutview

3.1 Nøglefunktioner

• 150W Kraftig sugeevne: Equipped with a single-phase brushless motor, providing 258m³/h air volume.
• 3-lags filtreringssystem: Includes a pre-filter, medium HEPA filter, and activated carbon filter for 99.97% purification efficiency.
• Integrated Sealed Design: Features unique metal buckles and a foam cover to prevent smoke leakage.
• Justerbar blæserhastighed: Knob control for diverse air volumes to meet specific needs.
• Stille drift: Operates at approximately 50dB noise level.
• Jævn mobilitet: Equipped with casters for easy movement and brakes for secure placement.
• Bred kompatibilitet: Suitable for Mecpow X3, X5, X4 series, and other enclosed laser engraving machines.

Figure 2: Mecpow P150 Fume Extractor connected to a laser engraver, illustrating its primary function and features.

3.2 Komponenter

The Mecpow P150 Fume Extractor typically includes the following components:

• Main Fume Extractor Unit
• Fleksibel udstødningsslange
• Strømkabel
• Pre-filter (installed or separate)
• Medium HEPA Filter (installed or separate)
• Activated Carbon Filter (installed or separate)
• Casters (may require assembly)
• Brugermanual

Figure 3: Illustration of the Mecpow P150 Fume Extractor and its included accessories.

4. Opsætning

Follow these steps to set up your Mecpow P150 Fume Extractor:

1. Udpakning: Fjern forsigtigt alle komponenter fra emballagen. Gem emballagen til senere transport eller opbevaring.
2. Montering af hjul: If not pre-installed, attach the four casters to the bottom of the unit. Ensure they are securely fastened.
3. Filterinstallation: The 3-layer filters (pre-filter, HEPA, activated carbon) are typically pre-installed. If not, refer to the maintenance section for correct filter placement. Ensure the foam seal is properly seated to prevent leaks.
4. Slangeforbindelse: Connect one end of the flexible exhaust hose to the fume extractor's outlet port. Secure it with the provided clamp. Connect the other end to your laser engraver's exhaust port or enclosure.
5. Placering: Position the fume extractor on a stable, level surface near your workspace. Ensure there is adequate space around the unit for air circulation. Use the caster brakes to lock the unit in place.
6. Strømtilslutning: Plug the power cable into the unit and then into a grounded electrical outlet.

Figure 4: Detail of the smooth casters with brakes for easy positioning and stability.

Figure 5: The integrated sealed design, featuring a foam seal and metal buckles, ensures no smoke leakage.

5. Betjeningsvejledning

Operating the Mecpow P150 Fume Extractor is straightforward:

1. Tænd: Turn the main power knob to the 'ON' position. The unit will start operating at a low speed.
2. Juster sugestyrke: Rotate the knob clockwise to increase the fan speed and suction power. Rotate counter-clockwise to decrease it. Adjust the speed according to the amount of smoke or fumes being generated.
3. Overvågning: Observe the effectiveness of the fume extraction. Ensure that smoke and fumes are being drawn into the hose and away from your workspace.
4. Sluk: After use, turn the main power knob to the 'OFF' position. Unplug the unit from the power outlet if it will not be used for an extended period.

Figure 6: The control panel with the adjustable knob for setting the desired suction power.

Figure 7: Visual representation of adjustable air volumes, from 10% to 100% suction.

6. Vedligeholdelse

Regular maintenance ensures optimal performance and longevity of your fume extractor.

6.1 Filterudskiftning

The Mecpow P150 uses a 3-layer filtration system. Filters should be inspected regularly and replaced when suction power decreases significantly or when the filters appear visibly clogged.

Figur 8: 3-ernetage filtration system, consisting of a pre-filter, HEPA filter, and activated carbon filter.

1. Sluk og tag stikket ud: Always turn off the unit and unplug it from the power source before opening.
2. Adgangsfiltre: Locate the filter access panel, usually on the top or side of the unit. Open the panel according to the instructions on the unit or in the manual.
3. Fjern gamle filtre: Carefully remove the used filters, starting with the top layer (pre-filter), then the medium HEPA filter, and finally the activated carbon filter. Dispose of used filters responsibly according to local regulations.
4. Installer nye filtre: Insert new genuine Mecpow filters in the correct order: activated carbon filter at the bottom, followed by the medium HEPA filter, and then the pre-filter on top. Ensure they are seated correctly and the foam seal is intact.
5. Luk panel: Luk filteradgangspanelet forsvarligt.

6.2 Rengøring

• Tør ydersiden af ​​enheden af ​​med en blød, damp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Periodically check the exhaust hose for blockages or damage.

7. Fejlfinding

If you encounter issues with your Mecpow P150 Fume Extractor, refer to the following table:

8. Specifikationer

9. Garanti og support

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official Mecpow webwebsted. Du kan også kontakte sælgeren direkte for at få hjælp.

Visit the Mecpow Store: Mecpow Official Store