Vigtige sikkerhedsoplysninger
WARNING: This product contains a gas lift mechanism. Always follow the instructions for proper use and assembly to prevent injury. Be cautious of sharp edges during assembly. Do not exceed the maximum weight capacity of 264 lbs. Keep away from heat sources and open flames. Always use the chair on a stable surface.
- Sørg for, at alle skruer og bolte er forsvarligt tilspændt før brug.
- Stå ikke på stolen.
- Avoid placing heavy objects on the chair that could cause instability.
- Regularly inspect the chair for loose parts or damage.
Pakkens indhold
Før montering skal du kontrollere, at alle komponenter er til stede og ubeskadigede. Hvis der mangler eller er beskadigede dele, bedes du kontakte kundeservice.
- Hbada P2 Ergonomic Office Chair components
- Samlesæt med hardware
- Welcome guide (this manual)
Image: Fully assembled Hbada P2 Office Chair in a home office setting.
Monteringsvejledning
Follow these steps carefully to assemble your Hbada P2 Office Chair. It is recommended to assemble the chair on a soft, clean surface to prevent damage.
- Udpak komponenter: Tag forsigtigt alle dele ud af emballagen, og læg dem ud.
- Fastgør hjul til basen: Insert the casters into the holes at the end of each leg of the chair base. Push firmly until they click into place.
- Indsæt gasløft: Placer gasløftecylinderen i det midterste hul på stolebasen.
- Assemble Seat Mechanism: Attach the seat mechanism to the underside of the seat cushion using the provided screws. Ensure the front of the mechanism faces the front of the seat.
- Fastgør armlæn: Secure the armrests to the seat cushion using the designated screws.
- Tilslut ryglænet til sædet: Fastgør ryglænet til sædeenheden.
- Mount Seat Assembly to Gas Lift: Placer forsigtigt det samlede sæde og ryglæn på gasløftcylinderen.
- Fastgør nakkestøtten: Slide the headrest into the slots at the top of the backrest.
- Endelig kontrol: Verify all connections are secure and the chair functions correctly.
Image: Diagram illustrating the key dimensions of the Hbada P2 Office Chair.
Betjeningsvejledning
Your Hbada P2 Office Chair offers several adjustable features to customize your seating experience.
1. Sædehøjdejustering
To adjust the seat height, locate the lever on the right side beneath the seat. Pull the lever up while seated to lower the seat, or pull it up while standing to raise the seat. Release the lever at the desired height.
2. Hvilefunktion
The chair can recline and lock into three positions: 90° (upright), 110° (relaxed), and 135° (nap). To recline, pull the lever on the left side beneath the seat. Lean back to your desired angle and push the lever down to lock it. To return to an upright position, pull the lever up and lean forward.
Image: Illustration showing the 90°, 110°, and 135° reclining angles of the chair.
3. 3D Adjustable Lumbar Support
The lumbar support can be adjusted in height, depth, and width to conform to your lower back. Locate the adjustment controls on the backrest. Adjust the support until it provides optimal comfort and alignment for your spine.
- Højdejustering: Push the lumbar support up or down.
- Dybdejustering: Rotate the knob (if present) or push the support forward/backward.
- Side-to-Side Motion: The lumbar support offers 10° side-to-side motion for dynamic support.
Billede: Detaljeret view of the 3D adjustable lumbar support, showing height, depth, and side-to-side adjustments.
4. 2D Adjustable Headrest
The headrest can be adjusted in height and swivel angle. Grasp the headrest and move it up or down to your preferred height. It also swivels 40° to provide neck support.
Image: Close-up of the 2D adjustable headrest, highlighting its height and swivel capabilities.
5. Justering af armlæn
The armrests are height-adjustable with a 7.5 cm (approximately 3 inches) range. Locate the button or lever on the side of each armrest. Press it and move the armrest up or down to your desired height. Release the button/lever to lock it in place.
Billede: View of the armrest, indicating the mechanism for height adjustment.
Opretholdelse
Proper maintenance ensures the longevity and optimal performance of your Hbada P2 Office Chair.
- Rensning:
- For mesh and fabric surfaces, use a soft cloth damprengøres med mild sæbe og vand. Undgå skrappe kemikalier.
- For plastic and metal parts, wipe with a clean, damp klæde.
- Do not saturate the chair with water.
- Inspektion: Kontrollér regelmæssigt alle skruer og bolte for at sikre, at de er spændte. Spænd dem igen om nødvendigt.
- Hjul: Keep casters clean from hair and debris to ensure smooth movement.
- Gaslift: Do not attempt to disassemble or repair the gas lift cylinder yourself. Contact customer service if it malfunctions.
Image: Diagram illustrating the layered construction of the elastic foam seat cushion.
Fejlfinding
If you encounter any issues with your Hbada P2 Office Chair, refer to the following common problems and solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Stolen justerer ikke højden | Fejl på gasløft, eller håndtaget er ikke aktiveret. | Ensure the height adjustment lever is fully engaged. If the issue persists, contact customer service. |
| Stolen vakler eller er ustabil | Løse skruer eller ujævn montering. | Check and tighten all assembly screws. Ensure the chair is on a flat, stable surface. |
| Hjulene ruller ikke jævnt | Affald sidder fast i hjulene. | Clean any hair, dust, or debris from the caster wheels. |
| Ryglænet kan ikke lænes tilbage eller låses | Recline mechanism not engaged or damaged. | Ensure the recline lever is fully engaged. If the mechanism is stuck, try gently rocking the chair while adjusting. Contact customer service if it remains unresponsive. |
Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | Hbada |
| Modelnummer | P2 |
| Farve | Hvid |
| Samlet højde | 105.5 - 126.5 cm (41.5 - 49.8 tommer) |
| Base Bredde | 70 cm (27.6 tommer) |
| Sædebredde | 51 cm (20.1 tommer) |
| Sædedybde | 52 cm (20.5 tommer) |
| Sædehøjdeområde | 40 - 48 cm (15.7 - 18.9 tommer) |
| Varens vægt | 43 pund |
| Rygstil | Mesh-ryg |
| Fyldningsmateriale | Memory skum |
| Liggende stillinger | 3 (90°, 110°, 135°) |
| Lændestøtte | 3D Adjustable (Height, Depth, Width, 10° Side-to-Side Motion) |
| Nakkestøtte | 2D Adjustable (Height, 40° Swivel) |
| Armlæn | Height Adjustable (7.5 cm / 3 inches range) |
| Maksimal vægtkapacitet | 264 lbs |
Garanti og kundesupport
Your Hbada P2 Ergonomic Office Chair comes with a comprehensive warranty and dedicated customer support.
- Garanti: This product is covered by a 3-year warranty from the date of purchase. This warranty covers manufacturing defects and material flaws under normal use.
- Returnerer: A 30-day free return policy is available.
- Prismatch: Der tilbydes 15 dages prismatchgaranti.
- Kundeservice: For any questions, assistance with assembly, troubleshooting, or warranty claims, please contact Hbada customer service. Refer to the welcome guide or the official Hbada webwebsted for kontaktoplysninger.
