Indledning
This manual provides detailed instructions for the assembly, operation, and maintenance of your ROBOTIME EAB01 3D Puzzle Gift Factory Wooden Model. Please read all instructions carefully before beginning assembly to ensure a smooth and enjoyable building experience. This model is designed to be a dynamic and interactive display piece, featuring a gift production line, LED lighting, and music.
Sikkerhedsoplysninger: Not suitable for children under 14 years due to small parts and complex assembly. Adult supervision is recommended for younger builders within the recommended age range.
Hvad er der i æsken
Your ROBOTIME EAB01 kit includes all necessary components for assembly. Please verify all parts are present before starting.
- Pre-cut wooden sheets with puzzle pieces
- Electronic components (LED lights, music module)
- Monteringsvejledning
- Small accessories (e.g., screws, wires, plastic parts)
Billede: Overview of the kit contents, including wooden sheets and the instruction manual.
Opsætning og montering
The ROBOTIME EAB01 model is designed for advanced assembly, requiring approximately 12 hours to complete. No glue is needed as pieces fit together using wooden tenon and mortise joints.
Forberedelse
- Udpak komponenter: Fjern forsigtigt alle træplader og andre komponenter fra emballagen.
- Organiser stykker: Identify and organize pieces by their corresponding sheet numbers or labels as indicated in the assembly manual.
- Review Instruktioner: Thoroughly read the entire assembly instruction manual provided in the kit before starting. Pay close attention to diagrams and step-by-step guidance.
- Forbered arbejdsområde: Sørg for et rent, godt oplyst og rummeligt arbejdsområde for at forhindre tab af små dele.
Monteringstrin
Follow the illustrated assembly instructions provided with your kit. The process involves interlocking wooden pieces to form the structure, followed by the integration of electronic components for lighting and music.
- Trin-for-trin konstruktion: Assemble the model section by section, ensuring each joint is secure. Refer to the manual for the correct sequence.
- Elektronisk integration: Install the LED lights and music module as directed. Ensure all connections are firm.
- Test: Periodically test the electronic functions during assembly if possible, especially before sealing sections that might make access difficult later.
Billede: Detaljeret view of the "Raw Stock" material processing and "Assembly Line" sections of the Gift Factory model.
Billede: Detaljeret view of the "Packaging and Sealing" and "Bow Tying" sections of the Gift Factory model's production line.
Image: The kit components spread out, demonstrating the wooden mortise joint design that requires no glue for assembly.
Betjeningsvejledning
Once fully assembled, your ROBOTIME EAB01 Gift Factory model can be operated to showcase its dynamic features.
Tænder
Locate the power switch, typically found at the base or rear of the model. Flip the switch to the 'ON' position to activate the LED lights and music function.
Image: The assembled Gift Factory model with its lights on and music playing, illustrating its full operational state.
Dynamic Production Line
The model features a simulated gift production line. Observe the movement of the elves and gifts through the various stages: material processing, assembly line, packaging and sealing, and bow tying.
- Materialebehandling: Gifts begin their journey in the "Raw Stock" area.
- Assembly Line: Gifts move along the conveyor system.
- Packaging and Sealing: Gifts are prepared for shipment.
- Bow Tying: The final touch is added to the gifts.
Image: A visual breakdown of the four key stages of the Gift Factory's production process.
Opretholdelse
Proper care will ensure the longevity and continued enjoyment of your ROBOTIME EAB01 model.
- Rensning: Use a soft, dry cloth to gently wipe dust from the model. Avoid using water or chemical cleaners, as they may damage the wood or electronic components.
- Opbevaring: Store the model in a dry environment, away from direct sunlight and extreme temperatures, to prevent warping or fading of the wood.
- Håndtering: Handle the model with care, especially when moving it, to avoid dislodging or damaging delicate parts.
- Udskiftning af batteri: If your model uses batteries for the lights and music, replace them as needed following the instructions in the original assembly manual. Ensure correct polarity.
Fejlfinding
If you encounter any issues with your ROBOTIME EAB01 model, refer to the following common problems and solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lights or Music Not Working |
|
|
| Moving Parts Are Stuck |
|
|
| Manglende eller beskadigede dele | Manufacturing defect or accidental damage during assembly. | Contact ROBOTIME customer service for assistance. They offer service for lost or damaged parts. |
Specifikationer
| Feature | Detalje |
|---|---|
| Modelnavn | ROBOTIME EAB01 Gift Factory |
| Modelnummer | EAB01ROBOTIME |
| Materiale | High-quality Plywood |
| Antal stykker | 449 stk |
| Omtrentlig samlingstid | 12 timer |
| Samlede mål (L x B x H) | 24.5 x 16.5 x 25.7 cm (9.65 x 6.5 x 10.12 tommer) |
| Funktioner | Dynamic production line, LED lighting, Music function, 5 gift elves |
| Anbefalet alder | 14 år og opefter |
| Monteringsmetode | Wooden tenon and mortise assembly (no glue required) |
Image: Diagram illustrating the assembled dimensions of the Gift Factory model.
Garanti og support
ROBOTIME offers support for lost or damaged parts. For assistance, please contact ROBOTIME customer service directly.
For further information or support, you may visit the official ROBOTIME store on Amazon: ROBOTIME Butik.
You can also scan the QR code on the product packaging for more information or support. An example link from the packaging is: ROBOTIME Support Link.
The UPC for this product is 6946785123371.
