1. Introduktion
Thank you for choosing the DEEPOWER K300 Electric Bike. This manual provides essential information for the safe and effective operation, assembly, and maintenance of your new electric bicycle. Please read this manual thoroughly before your first ride and keep it for future reference. The K300 is a 14-inch folding electric bicycle designed for urban commuting and leisure, featuring a 400W motor, 48V 10Ah battery, and a multi-shock absorption system for a comfortable riding experience.
2. Sikkerhedsoplysninger
- Brug altid hjelm og passende sikkerhedsudstyr, når du kører.
- Sæt dig bekendt med lokale færdselslove og -regler vedrørende elcykler.
- Udfør en inspektion før hver brug, hvor du kontrollerer bremser, dæk, batteriniveau og alle fastgørelseselementer.
- Rid ikke under påvirkning af alkohol eller stoffer.
- Avoid riding in adverse weather conditions, such as heavy rain, snow, or strong winds.
- Sørg for, at alle bolte og hurtigudløsere er forsvarligt spændt, inden du kører.
- Overskrid ikke den anbefalede maksimale vægt på 264 pund.
3. Komponenter overview
The DEEPOWER K300 Electric Bike is equipped with several key components designed for performance and comfort.






4. Opsætning og montering
The DEEPOWER K300 Electric Bike arrives 90% pre-assembled. The remaining steps are straightforward and require minimal effort.
- Udpakning: Carefully remove the bike and all accessories from the packaging. Retain packaging for future transport or storage.
- Udfoldning af rammen: Locate the folding mechanism on the main frame. Release the safety latch and unfold the frame until it locks securely into place. Ensure the locking mechanism is fully engaged.
- Montering/justering af styr: Insert the handlebar stem into the fork tube and tighten the quick release or bolt. Adjust the handlebar height to a comfortable riding position and secure it. Ensure the handlebar is aligned with the front wheel.
- Montering/justering af sadelpind: Insert the seat post into the frame's seat tube. Adjust the seat height to allow for a slight bend in your knee when your foot is on the pedal at its lowest point. Secure the seat post with the quick release.
- Pedalfastgørelse: Identify the left (L) and right (R) pedals. Thread the pedals into the crank arms. Note that the left pedal has a reverse thread. Tighten them firmly with a wrench.
- Batteri installation: If the battery is not pre-installed, slide it into its designated compartment until it clicks into place. Ensure it is securely locked.
- Indledende opkrævning: Before your first ride, fully charge the battery. Connect the charger to the bike's charging port and then to a power outlet. The indicator light on the charger will change when fully charged.
- Tjek før kørsel: Before riding, double-check all connections, bolts, and quick releases. Ensure tires are inflated to the recommended pressure (refer to tire sidewall for details). Test brakes and lights.


5. Betjeningsvejledning
Understanding the controls and features of your K300 e-bike is crucial for a safe and enjoyable ride.
5.1 Tænd/sluk
- To power on the bike, press and hold the power button on the LCD display.
- For at slukke skal du trykke på tænd/sluk-knappen igen, indtil skærmen slukker.
5.2 Køretilstande
K300 tilbyder tre køretilstande:
- Pedalhjælpstilstand (PAS): The motor provides assistance as you pedal. You can adjust the level of assistance (3 speeds) using the controls on the left handlebar.
- Elektrisk tilstand (gashåndtag): Use the twist grip throttle to engage the motor without pedaling. This mode provides full electric power.
- Normal cykeltilstand: Kør cyklen som en traditionel cykel uden motorassistance.
5.3 LCD-skærm
The smart LCD display allows you to monitor and customize your ride.
- Hastighed: Viser den aktuelle hastighed.
- Batteriniveau: Viser den resterende batteriopladning.
- Kilometertal: Tracks trip distance and total mileage.
- Assist niveau: Angiver det aktuelle pedalassistanceniveau (1-3).
- Fejlkoder: Displays diagnostic codes if a fault occurs.

5.4 Lysanlæg
The K300 is equipped with an integrated lighting system for visibility and safety.
- Forlygte: Press the light button on the handlebar controls to turn the LED bright headlight on or off.
- Taillight & Turn Signals: The integrated taillight and turn signals enhance visibility from the rear. Use the corresponding controls to activate turn signals.

6. Vedligeholdelse
Regular maintenance ensures the longevity and safe operation of your DEEPOWER K300 Electric Bike.
6.1 Pleje af batterier
- Oplad batteriet helt efter hver tur, især hvis det skal opbevares i længere tid.
- Batteriet må ikke tømmes helt.
- Opbevar batteriet et køligt, tørt sted, væk fra direkte sollys og ekstreme temperaturer.
- Brug kun den originale oplader, der fulgte med cyklen.
6.2 Dækvedligeholdelse
- Check tire pressure before each ride. Maintain the pressure recommended on the tire sidewall.
- Undersøg dækkene regelmæssigt for slid, snitsår eller punkteringer.
6.3 Bremsesystem
- Kontroller regelmæssigt bremseklodserne for slid, og udskift dem efter behov.
- Sørg for, at bremsegrebene er faste og reagerer hurtigt. Juster bremsekablerne, hvis der er for meget slæk.
- Hold bremseskiverne rene og fri for olie eller fedt.
6.4 Generelt eftersyn
- Kontrollér regelmæssigt alle bolte, møtrikker og fastgørelseselementer for tæthed.
- Smør kæden regelmæssigt med cykelspecifik kædesmøremiddel.
- Rengør cyklen med en damp klud og mild sæbe. Undgå at bruge højtryksrensere direkte på elektriske komponenter.
7. Fejlfinding
This section addresses common issues you might encounter with your DEEPOWER K300 Electric Bike.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Cyklen tænder ikke | Battery not charged; Battery not properly seated; Loose electrical connection | Charge battery fully; Ensure battery is securely installed; Check all visible connections. |
| Motoren hjælper ikke | Low battery; PAS level set to 0; Brake levers engaged; Motor connection loose | Charge battery; Increase PAS level on display; Release brake levers; Check motor cable connection. |
| Bremserne føles svage | Slidte bremseklodser; Løst bremsekabel; Forurenede rotorer | Inspicer og udskift bremseklodser; Juster bremsekablets spænding; Rengør rotorer med skivebremserens. |
| Usædvanlige lyde under kørslen | Loose components; Dry chain; Rubbing brakes | Check all bolts and fasteners; Lubricate chain; Adjust brake caliper alignment. |
| Display fungerer ikke | Loose cable connection; Water damage | Check display cable connection; Contact customer support if issue persists. |
If you encounter an issue not listed here, or if the suggested solutions do not resolve the problem, please contact DEEPOWER customer support for assistance.
8. Specifikationer
Detailed technical specifications for the DEEPOWER K300 Electric Bike.
| Feature | Specifikation |
|---|---|
| Modelnavn | K300 |
| Type cykel | Sammenklappelig elcykel |
| Motor Wattage | 400W |
| Batterikapacitet | 48V 10Ah (480Wh) |
| Max hastighed | Op til 20 MPH |
| Range per Charge (PAS) | 20-35 miles |
| Hjulstørrelse | 14 tommer |
| Rammemateriale | Kulstoflegering |
| Ophængstype | Dual (Multi-shock absorption) |
| Bremse stil | disk |
| Antal hastigheder | 3 (Pedal Assist Levels) |
| Anbefaling af maksimal vægt | 264 pund |
| Ebike vægt | 59 pund |
| Anbefalet rytterhøjde | 175 cm - 175 cm |
| Inkluderede komponenter | E Bike Accessory Kit, Electric Bike, Charger |

9. Garanti og support
The DEEPOWER K300 Electric Bike comes with a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or contact DEEPOWER customer support. If you require spare parts, such as a battery or brake pads, please search the DEEPOWER store or contact the seller directly for assistance.
For any inquiries or technical support, please visit the official DEEPOWER store on Amazon or contact their customer service team. You can find answers to frequently asked questions, such as assembly complexity and delivery times, on the DEEPOWER brand story page.





