WYBOT Osprey 300II robotpoolrenser instruktionsmanual

Sikkerhedsinstruktioner

Read this manual carefully before operating the WYBOT Osprey 300II Robotic Pool Cleaner. Failure to follow instructions may result in damage or injury.

Generel sikkerhed

• Sørg for, at opladningsporten er tør, før du tilslutter opladeren.
• Do not operate the cleaner if the power cord or charger is damaged.
• Keep children and pets away from the pool area while the cleaner is in operation.
• Do not operate the cleaner if there are swimmers in the pool.
• Brug kun den originale oplader fra WYBOT.

Batterisikkerhed

• The cleaner contains a Lithium-Ion battery. Do not expose it to extreme temperatures or direct sunlight.
• Do not attempt to disassemble or repair the battery pack.
• Bortskaf batteriet i henhold til lokale regler.

Pakkens indhold

Kontroller, at alle varer er inkluderet i pakken:

• 1 x Cleaner Body
• 1 x oplader
• 1 x brugermanual
• 1 x Brush (pre-installed or optional)
• 1 x Floating Handle
• 1 x Swing Plate
• 1 x Quick Guide

Image: Contents of the WYBOT Osprey 300II package, including the cleaner, charger, manuals, brush, floating handle, and swing plate.

Produkt overview

The WYBOT Osprey 300II is a cordless robotic pool cleaner designed for efficient and autonomous pool maintenance.

Nøglefunktioner:

• Forlænget driftstid: Up to 130 minutes with a 6600mAh battery.
• Strong Motor Power: 45W brushless motor for effective debris removal.
• Hurtig opladning: Fuldt opladet på cirka 3 timer.
• Alsidig anvendelse: Suitable for various pool types (above-ground, in-ground) and surfaces (PVC, tiles, vinyl, gunite), including slopes up to 15 degrees.
• Auto-Parking Technology: Automatically returns to the pool edge when battery is low.
• Avanceret filtreringssystem: Captures fine debris like sand, leaves, and pet hair.

Image: The WYBOT Osprey 300II Robotic Pool Cleaner, showcasing its sleek design and wheels.

Opsætning

1. Charging the Cleaner

1. Sørg for, at støvsugeren er tør, inden den oplades.
2. Locate the charging port on the top of the cleaner.
3. Connect the charger cable to the port and plug the charger into a power outlet.
4. The LED indicator on the charger will show red during charging and turn green when fully charged (approximately 3 hours).

Image: A person connecting the charger to the WYBOT Osprey 300II pool cleaner near a pool.

2. Attaching the Floating Handle (Optional)

The floating handle can be attached to the cleaner to assist with retrieval from the pool.

1. Tie the floating handle securely to the designated attachment point on the cleaner.
2. Adjust the length of the rope to ensure the handle floats on the surface of the water when the cleaner is at the deepest part of the pool.

3. Brush Installation (Optional)

The cleaner comes with brushes that can be installed on the bottom for enhanced cleaning performance, especially on rougher surfaces. For pools with uneven bottoms, it is recommended to test without brushes first to avoid obstruction.

1. Turn the cleaner upside down.
2. Align the brushes with the designated slots on the bottom of the cleaner.
3. Press firmly until the brushes snap into place.

Betjeningsvejledning

1. Placing the Cleaner in the Pool

1. Ensure the cleaner is fully charged and the charging port is securely closed.
2. Long press the power button on the cleaner to turn it on.
3. Gently lower the cleaner into the pool until it is fully submerged. Hold it underwater until all air bubbles escape.
4. Release the cleaner and allow it to sink to the bottom. Ensure it lands in an upright position.

Video: Demonstration of placing the WYBOT Osprey 300II pool cleaner into the water and its initial operation.

2. Rengøringstilstande

The Osprey 300II operates automatically once activated. It features intelligent path planning to maximize cleaning coverage.

3. Auto-Parking Function

When the battery level is low, the cleaner will automatically move to the nearest pool edge for easy retrieval. The LED indicator will signal low battery status.

Image: The WYBOT Osprey 300II pool cleaner automatically returning to the edge of the pool, indicated by a 'P' symbol and a battery icon.

Opretholdelse

1. Rengøring af filterkurven

1. After each cleaning cycle, retrieve the cleaner from the pool.
2. Open the top cover of the cleaner to access the filter basket.
3. Fjern filterkurven, og tøm eventuelt opsamlet snavs.
4. Skyl filterkurven grundigt med en haveslange, indtil den er ren.
5. Reinsert the clean filter basket and close the top cover securely.

Image: A person cleaning the filter basket of the WYBOT Osprey 300II with a garden hose, showing collected debris.

2. Almen pleje

• Opbevar rengøringsmidlet et køligt, tørt sted væk fra direkte sollys, når det ikke er i brug.
• Ensure the charging port is dry before storage.
• Regularly inspect the wheels and brushes for wear and tear.

Fejlfinding

If you encounter issues with your WYBOT Osprey 300II, refer to the following common solutions:

• Rengøringsmiddel bevæger sig ikke: Ensure the battery is fully charged and the power button is pressed. Check for any obstructions in the wheels or suction inlet.
• Dårlig rengøringsevne: Clean the filter basket. Ensure brushes are properly installed if needed for your pool surface.
• Rengøringsmiddel sidder fast: If your pool has uneven surfaces or obstacles, consider removing the brushes or manually guiding the cleaner initially.
• LED-indikatoren virker ikke: Contact customer support if the LED indicator does not function as described after charging or during operation.

Specifikationer

Garanti og support

For warranty information, technical support, or service inquiries, please refer to the contact details provided in your product packaging or visit the official WYBOT webwebsted.