Indledning
This manual provides instructions for the operation and maintenance of your Timex Ironman Shock Endure 42mm Digital Watch. Please read this manual thoroughly to ensure proper use and to understand all features of your watch.
The Timex Ironman Shock Endure is designed for durability and performance, featuring a shock-resistant case, 200m water resistance, a 30-lap memory chronograph, and an INDIGLO backlight.
Opsætning
Knap funktioner
Your watch features several buttons for navigation and function control. Refer to the image below for button identification.
Image 1: Watch Face and Button Layout. This image displays the front of the Timex Ironman Shock Endure watch, highlighting the digital display and the six control buttons. The top left button is 'SET/RECALL', the bottom left is 'MODE', the top right is 'INDIGLO', the bottom right is 'STOP/RESET', and the two central bottom buttons are 'START' and 'SPLIT'.
- MODE-knap (nederst til venstre): Skifter mellem forskellige urtilstande (tid, kronograf, timer, alarm).
- SET/RECALL Button (Top Left): Used to set time/date, and recall chronograph laps.
- INDIGLO Button (Top Right): Activates the INDIGLO backlight.
- STOP/RESET Button (Bottom Right): Stops and resets the chronograph or timer.
- START Button (Center Bottom Left): Starts the chronograph or timer.
- SPLIT Button (Center Bottom Right): Records split times in chronograph mode.
Indstilling af tid og dato
- From Time Mode, press and hold the INDSTIL/GENKALD knappen, indtil displayet blinker.
- Tryk på MODE button to cycle through the settings: Seconds, Hour, Minute, Year, Month, Day.
- Brug STARTE or SPLIT knapperne til at justere den blinkende værdi.
- Når alle indstillinger er korrekte, skal du trykke på INDSTIL/GENKALD button to exit setting mode.
Driftstilstande
Tidstilstand
This is the default display mode, showing the current time, day of the week, and date. Press the INDIGLO button to activate the backlight for visibility in low light conditions.
Chronograph Mode (Stopwatch)
The watch features a 30-lap memory chronograph for measuring elapsed time.
- From Time Mode, press the MODE button until "CHRONO" or a stopwatch icon appears.
- Tryk på STARTE knappen for at starte tidtagningen.
- Tryk på SPLIT button to record a lap time. The display will show the split time while the chronograph continues to run in the background. Press SPLIT again to return to the running time.
- Tryk på STOP/NULSTIL button to pause the chronograph. Press STARTE at genoptage.
- For at nulstille kronografen skal du trykke på STOP/NULSTIL button while it is paused.
- To recall lap times, press the INDSTIL/GENKALD button while in Chronograph mode. Use STARTE or SPLIT to scroll through recorded laps.
Timer Mode
The timer function allows for countdown timing.
- From Time Mode, press the MODE button until "TIMER" or a timer icon appears.
- To set the timer, press and hold the INDSTIL/GENKALD knappen, indtil displayet blinker.
- Brug MODE button to select hours, minutes, or seconds, and STARTE or SPLIT for at justere værdierne.
- Trykke INDSTIL/GENKALD for at bekræfte og afslutte indstillingstilstand.
- Tryk på STARTE button to begin the countdown.
- Tryk på STOP/NULSTIL button to pause the timer. Press STARTE at genoptage.
- Når timeren når nul, lyder en alarm. Tryk på en vilkårlig knap for at stoppe alarmen.
Alarmtilstand
Set an alarm to sound at a specific time.
- From Time Mode, press the MODE button until "ALARM" or an alarm icon appears.
- For at indstille alarmtidspunktet skal du trykke på og holde INDSTIL/GENKALD knappen, indtil displayet blinker.
- Brug MODE button to select hours or minutes, and STARTE or SPLIT for at justere værdierne.
- Trykke INDSTIL/GENKALD for at bekræfte og afslutte indstillingstilstand.
- For at tænde/slukke alarmen skal du trykke på STARTE button while in Alarm mode. An alarm icon will appear when the alarm is active.
- Når alarmen lyder, skal du trykke på en vilkårlig knap for at afbryde den.
INDIGLO Backlight
The INDIGLO backlight illuminates the watch display for easy reading in low-light conditions. Press the INDIGLO button (top right) to activate it. The backlight will remain on for a few seconds.
Vandmodstand
This watch is water resistant to 200 meters (660 feet). It is suitable for recreational scuba diving. Do not press any buttons while the watch is submerged to prevent water entry.
Image 2: Watch Caseback. This image shows the stainless steel caseback of the watch, clearly indicating its 200-meter water resistance rating.
Opretholdelse
Rengøring af dit ur
For at rengøre dit ur skal du tørre det af med en blød kludamp cloth. For water-resistant models, you can rinse it under tap water. Avoid using harsh chemicals or abrasive cleaners, as these can damage the watch's finish or seals.
Udskiftning af batteri
When the display dims or functions become erratic, it may be time to replace the battery. Battery replacement should ideally be performed by a qualified watch technician to ensure proper sealing and water resistance. Refer to the caseback for battery type (e.g., CR 2016).
Billede 3: Vinklet View of Watch Back. Dette billede giver en vinklet view of the watch's rear, showing the caseback details and the attachment of the durable resin strap.
Opbevaring
Store your watch in a cool, dry place away from direct sunlight and extreme temperatures when not in use. Avoid exposing it to strong magnetic fields.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Skærmen er svag eller tom. | Lavt batteri. | Udskift batteriet. |
| Uret viser ikke præcis tid. | Incorrect time setting; battery low. | Reset time and date; replace battery if issue persists. |
| Knapperne reagerer ikke. | Watch may be in a locked mode (if applicable); internal malfunction. | Try pressing all buttons to see if any respond. If unresponsive, contact customer support. |
| Vand inde i uret. | Buttons pressed underwater; damaged seal. | Tag straks uret til et kvalificeret servicecenter. Forsøg ikke at tørre det selv. |
Specifikationer
- Modelnummer: TW5M648009J
- Sagsstørrelse: 42 mm
- Etui materiale: Harpiks
- Remmateriale: Harpiks
- Skærmtype: Digital
- Vandtæthed: 200 meter (660 fod)
- Chronograph: 30-omgangs hukommelse
- Baggrundsbelysning: INDIGLO
- Stødmodstand: Ja
- Batteritype: CR 2016
Image 4: Watch on Surface. This image shows the Timex Ironman Shock Endure watch from an elevated perspective, resting on a dark, textured surface, emphasizing its sturdy construction.
Garanti og support
Your Timex watch is warranted against manufacturing defects for a period of one year from the original date of purchase. This warranty does not cover normal wear and tear, battery, crystal, watch case, strap, or bracelet. Damage resulting from improper handling, lack of care, accidents, or unauthorized repairs is not covered.
For warranty service or technical support, please visit the official Timex webwebstedet eller kontakt deres kundeserviceafdeling. Gem din købsbevis til garantikrav.
Visit Timex Official Webwebsted
Image 5: Watch on Wrist. This image illustrates the Timex Ironman Shock Endure watch being worn on a person's wrist, providing a perspective on its size and how it appears when worn.
