Indledning
Thank you for choosing the KICKER LX Series 3000W RMS Class D Monoblock Amplifier and 1/0AWG Power Wiring Kit. This package is designed to deliver powerful and clear audio performance for your vehicle's sound system. This manual provides essential information for the proper installation, operation, and maintenance of your new amplifier and wiring kit. Please read this manual thoroughly before attempting installation or operation to ensure safe and optimal performance.
Sikkerhedsoplysninger
Always observe the following safety precautions when installing or operating your amplivligere:
- Disconnect the vehicle's battery negative terminal before beginning any electrical work.
- Ensure all wiring is properly routed and secured to prevent pinching, chafing, or short circuits.
- Use appropriate gauge wiring as specified in this manual and ensure all connections are secure.
- Installer ampOpbevaringsenheden på et sted, der giver tilstrækkelig ventilation for at forhindre overophedning.
- Udsæt ikke amplifner til fugt eller ekstreme temperaturer.
- If you are unsure about any part of the installation process, consult a professional car audio installer.
Pakkens indhold
Your KICKER Amplivligere og Amp Kit package includes the following items:
- Kicker 51LX3000.1 LX Series Class D Mono Amplivligere
- Kicker 46PKD1 P Series 1/0AWG Power Amplifier kit
Image: The complete KICKER LX Series Amplifier and Wiring Kit package, showing the amplifier, power cables, ground cables, remote wire, RCA cables, and the bass remote.
Billede: Detaljeret view of the KICKER 1/0AWG Power Wiring Kit components, including the main power cable, ground cable, fuse holder, and smaller gauge wires.
Opsætning og installation
Korrekt installation er afgørende for din ydeevne og levetid ampFølg disse generelle trin:
- Monteringssted: Choose a dry, well-ventilated location for the amplifier, away from direct sunlight or heat sources. Ensure sufficient space for wiring and air circulation.
- Strømtilslutning: Connect the 1/0AWG power cable from the battery (with an inline fuse within 18 inches of the battery) to the ampstrømforsyningens +12V-terminal.
- Jordforbindelse: Connect the 1/0AWG ground cable from the amplifier's GND terminal to a clean, bare metal point on the vehicle's chassis. The ground point should be as short as possible.
- Fjerntænding: Tilslut en fjernbetjeningsledning fra din hovedenheds fjernbetjeningsudgang til amplifier's REM terminal. This turns the amplifier on/off with your head unit.
- Signalindgang: Tilslut din hovedenheds RCA-udgange til amplifier's RCA inputs. Alternatively, use the high-level inputs if your head unit does not have RCA outputs.
- Højttaler output: Tilslut din(e) subwoofer(e) til amphøjttalerens højttalerudgangsterminaler, og overhold korrekt polaritet.
Billede: Bagside view of the KICKER LX Series amplifier, showing the power, ground, remote, RCA input/output, high-level input, and speaker terminals. Also visible are the various control knobs for gain, crossover, and bass boost.
FIT+™ Technology: Denne amplifier features FIT+™ Technology, which accepts up to 40V of input and utilizes full differential inputs to eliminate noise, ensuring a clean signal from your source unit.
Betjening af Amplivligere
Once installed, you can configure your amplifier for optimal sound performance:
- Forstærkningsindstilling: Use the Gain-match LEDs on the amplifier to set the input gain correctly. This ensures the amplifier receives an optimal signal level without clipping.
- Lavpasfilter (LPF): Adjust the variable low-pass filter (40-160 Hz, 24 dB/octave) to control the upper frequency limit of the audio signal sent to your subwoofer.
- Subsonisk filter: Set the subsonic filter (10-80 Hz, 24 dB/octave) to remove extremely low frequencies that are inaudible and can cause damage to your subwoofer.
- KickEQ+™ Parametric Bass Boost: Utilize the KickEQ+™ feature for adjustable bass enhancement. This allows for 0-6 dB bass boost, with a variable center frequency (20-80Hz) and variable bandwidth (1-5) to fine-tune your bass response.
- Smart Bass Remote: The included Smart Bass Remote allows for convenient control of the bass level from your listening position. Connect it to the 'REMOTE BASS' port on the amplivligere.
Image: The KICKER Smart Bass Remote, a compact wired remote control with a rotary knob and LED indicators for adjusting bass levels.
Opretholdelse
To ensure the longevity and optimal performance of your KICKER amplivligere:
- Regularly inspect all wiring connections for tightness and corrosion. Loose connections can lead to poor performance or damage.
- Behold amplifier clean and free of dust and debris. Use a soft, dry cloth for cleaning. Do not use liquid cleaners.
- Sørg for amplifier's cooling fins are not obstructed to allow for proper heat dissipation.
- Undgå at placere genstande oven på amplifier that could block ventilation.
Fejlfinding
Hvis du oplever problemer med din ampLifier, se følgende almindelige problemer og løsninger:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ingen strøm / Amplifer tænder ikke | Blown fuse, loose power/ground/remote wire, faulty remote turn-on signal. | Check inline fuse, verify all power, ground, and remote connections are secure and receiving proper voltage. Test remote wire for 12V when head unit is on. |
| Ingen lydudgang | No input signal, incorrect gain setting, speaker wires disconnected, amplifier i beskyttelsestilstand. | Check RCA/high-level input connections, adjust gain, verify speaker wiring polarity and connection, check amplifier status indicator for protection mode. |
| Forvrænget lyd | For høj forstærkning, forkerte delefiltre, dårlig jordforbindelse, beskadiget højttaler. | Reduce gain setting, adjust LPF/subsonic filters, ensure solid ground connection, inspect speaker for damage. |
| AmpOverophedning af væske | Utilstrækkelig ventilation, for lav impedans, langvarig brug med høj volumen. | Sørg for god luftgennemstrømning omkring ampLifier, verificer højttalerimpedansoverensstemmelser amplifier's capabilities, reduce listening volume or allow ampvarmebeholder til afkøling. |
If problems persist after attempting these solutions, please contact KICKER customer support or a qualified installer.
Specifikationer
Detailed specifications for the KICKER 51LX3000.1 LX Series Class D Mono Amplivligere:
- RMS Power Rating:
- 4 ohm: 1100 watt x 1 kanaler
- 2 ohm: 2000 watt x 1 kanaler
- 1 ohm: 3000 watts x 1 channel
- Maks. Udgangseffekt: 3800 watt
- Følsomhed: 95dB
- Frekvensrespons: 10-160 Hz
- Amplivligere klasse: Effektiv klasse-D
- Input bindtage: Up to 40V (FIT+™ Technology)
- Crossover: Variable Low-pass filter (40-160 Hz, 24 dB/octave)
- Subsonisk filter: 10-80Hz, 24 dB/octave
- Bass Boost: KickEQ+™ Parametric Bass Boost (0-6 dB, variable center 20-80Hz, variable bandwidth 1-5)
- Dimensioner (B x D x H): 8-7/16" x 12-5/8" x 2-3/8"
- Produktdimensioner: 15 x 21 x 10 inches; 17.32 Pounds (Package)
- Voltage: 40 volt (DC)
- Monteringstype: Frit stående
Billede: Vinklet view of the KICKER LX Series ampløfter, showcasing its compact design and robust build quality.
Billede: Top view of the KICKER LX Series amplifier, highlighting the central KICKER logo and the sleek, modern design.
Garantioplysninger
For detailed warranty information regarding your KICKER LX Series Amplifier and Wiring Kit, please refer to the warranty card included with your product or visit the official KICKER webGarantibetingelserne kan variere afhængigt af region og produkt.
Kundesupport
If you have any questions, require technical assistance, or need to troubleshoot issues not covered in this manual, please contact KICKER customer support. You can find contact information and additional resources on the official KICKER webwebsted:
