1. Introduktion
This manual provides comprehensive instructions for the safe and efficient use of your Ultimate Speed ULGD A1 12V/24V Car Battery Charger. This intelligent microprocessor-controlled device is designed for charging and maintaining 12V or 24V batteries with capacities ranging from 20 Ah to 300 Ah, suitable for cars, motorcycles, and trucks.
The kit includes the ULGD A1 charger and a connection cable for fixed battery mounting with cable lugs and a plug, ensuring optimal charge maintenance without sulfate formation.
Billede 1: Forside view of the Ultimate Speed ULGD A1 Car Battery Charger, showing the display and control buttons.
2. Sikkerhedsinstruktioner
Always read and understand all safety instructions before operating the charger. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Sørg for, at opladeren bruges i et godt ventileret område.
- Udsæt ikke opladeren for regn eller våde forhold.
- Disconnect the charger from the power supply before making or breaking connections to the battery.
- Avoid short-circuiting the charging cables.
- Brug øjenbeskyttelse og handsker, når du arbejder med batterier.
- Opbevares utilgængeligt for børn.
- Oplad ikke frosne batterier.
- This charger is protected against reverse polarity, short circuits, and overloads. However, always ensure correct connection.
3. Opsætning og tilslutning
Before connecting the charger, ensure the vehicle's ignition is off and all electrical consumers are switched off. Identify the positive (+) and negative (-) terminals on your battery.
Image 2: The Ultimate Speed ULGD A1 charger with its included cables, including battery clamps and the fixed mounting cable.
3.1 Tilslutning til batteriet
- Connect the red (+) charging clamp til den positive (+) pol på batteriet.
- Connect the black (-) charging clamp to the negative (-) terminal of the battery. For vehicles, it is often recommended to connect the negative clamp til køretøjets chassis væk fra batteriet og brændstofledningen.
- Alternatively, use the included connection cable for fixed mounting on the battery. Connect the cable lugs to the battery terminals and then plug the charger into this fixed connection.
3.2 Tilslutning til strømforsyning
- Once the charger is securely connected to the battery, plug the charger's power cord into a standard 220-240 V ~ 50-60 Hz electrical outlet.
- The charger will power on, and the LCD display will illuminate.
4. Betjeningsvejledning
The Ultimate Speed ULGD A1 features intelligent microprocessor control for fully automatic charging.
4.1 Selecting a Charging Program
- The charger offers 8 selectable charging programs to optimize charging for different battery types and conditions.
- Use the "MODE" button on the charger to cycle through the available programs. The LCD display will show the selected program, voltage value, and charge status.
- The charger automatically detects whether a 12V or 24V battery is connected.
- Standard opladning: For typical charging of 12V or 24V batteries.
- Pulse Charge: This program is designed for revitalizing deeply discharged batteries. It can be used for 12V batteries with an existing voltage of > 2V.
- Winter Charging Mode: Activates for low ambient temperatures (for both 12V and 24V batteries) to ensure efficient charging in cold conditions.
- Power Supply Programs: Two dedicated programs are available to provide power during battery changes, preventing loss of vehicle settings.
4.2 Opladningsproces
Once a program is selected, the charger will automatically begin the charging process. The LCD display will provide real-time information on the charging progress.
The charger is designed for long-term connection, providing optimal charge maintenance without sulfate formation, which extends battery life.
4.3 Frakobling af opladeren
- Unplug the charger from the electrical outlet first.
- Disconnect the black (-) charging clamp from the negative (-) battery terminal or vehicle chassis.
- Disconnect the red (+) charging clamp fra den positive (+) batteripol.
- If using the fixed mounting cable, simply unplug the charger from the fixed connection.
5. Vedligeholdelse og opbevaring
Proper maintenance ensures the longevity and optimal performance of your battery charger.
- Rensning: Frakobl opladeren fra alle strømkilder og batterier før rengøring. Tør ydersiden af med en blød, tør klud.amp klæde. Brug ikke skrappe kemikalier eller slibende rengøringsmidler.
- Opbevaring: Opbevar opladeren et køligt og tørt sted, væk fra direkte sollys og ekstreme temperaturer. Sørg for, at kablerne er pænt oprullede og ikke bøjede.
- Inspektion: Kontrollér opladningskablerne og -kl'erne regelmæssigt.amps for any signs of damage, wear, or corrosion. Do not use the charger if any part is damaged.
6. Fejlfinding
If you encounter issues with your Ultimate Speed ULGD A1 charger, refer to the following common problems and solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Opladeren tænder ikke. | Ingen strøm fra stikkontakten; løs forbindelse; intern fejl. | Check power outlet with another device. Ensure power cord is fully plugged in. Verify battery connections. |
| Charger not charging. | Incorrect program selected; battery too deeply discharged (below 2V for 12V); reverse polarity; short circuit; overload. | Select appropriate charging program. For very low voltage batteries, ensure it's above 2V for 12V batteries. Check for correct polarity. Inspect cables for short circuits. Allow charger to cool if overloaded. |
| LCD display shows error. | Specific error condition (e.g., reverse polarity, short circuit). | Refer to the charger's display for specific error codes or indicators. Disconnect and reconnect ensuring correct procedure. The charger has built-in protection against reverse polarity, short circuits, and overloads. |
| Opladeren bliver varm under drift. | Normal drift; høj ladestrøm. | This is normal. Ensure adequate ventilation around the charger. If it becomes excessively hot, disconnect and allow to cool. |
Hvis problemet fortsætter efter at have forsøgt disse løsninger, bedes du kontakte kundesupport.
7. Tekniske specifikationer
| Feature | Specifikation |
|---|---|
| Modelnummer | ULGD A1 Set |
| Operation Voltage | 220-240 V ~ 50-60 Hz |
| Charging Current (12V) | Maks. 10 A. |
| Charging Current (24V) | Maks. 5 A. |
| Batterikapacitetsområde | 20 Ah - 300 Ah |
| Omgivelsestemperatur | -20 °C til +50 °C |
| Materiale | Plast |
| Dimensioner (L x B x H) | Ca.. 22.2 x 10.4 x 5.8 cm |
| Vægt | Ca. 805 g |
| Cable Length (Power) | Ca. 2.20 m |
| Cable Length (Charging) | Ca. 1.80 m |
8. Garanti og support
The Ultimate Speed ULGD A1 Car Battery Charger typically comes with a 3 års garanti, som angivet på produktemballagen. Gem venligst din købsbevis til garantikrav.
For technical support, warranty claims, or further inquiries, please contact the manufacturer or your point of purchase. Detailed contact information can usually be found on the product packaging or the manufacturer's official webwebsted.
Please note that software updates and spare parts availability information is not explicitly provided in the product data.
