RAF R.2862 3-i-1 trådløs foodprocessor brugermanual

1. Vigtige sikkerhedsoplysninger

Please read all instructions carefully before using your RAF R.2862 Cordless Food Processor. Keep this manual for future reference.

• Always ensure the appliance is fully charged before use for optimal performance.
• Hold hænder og redskaber væk fra bearbejdningsskålen under drift for at forhindre skader.
• Knivene er skarpe. Håndter med ekstrem forsigtighed under montering, adskillelse og rengøring.
• Motorbasen må ikke nedsænkes i vand eller andre væsker. Rengør medamp kun klud.
• Dette apparat er ikke beregnet til brug af personer med nedsatte fysiske, sensoriske eller mentale evner, eller manglende erfaring og viden, medmindre de er under opsyn eller har fået instruktion i brugen af ​​apparatet af en person, der er ansvarlig for deres sikkerhed.
• Sørg for, at låget er forsvarligt låst på plads, inden du bruger foodprocessoren.
• Do not attempt to process extremely hard foods that may damage the blades or motor.

2. Produktet er slutview og komponenter

The RAF R.2862 is a versatile 3-in-1 cordless food processor designed for chopping, mixing, and blending various ingredients. Familiarize yourself with its components:

• Motorbase: Contains the powerful 200W motor and rechargeable battery.
• Behandlingsskål: Gennemsigtig skål til opbevaring af ingredienser.
• Låg med påfyldningsrør: Sikrer skålen og tillader tilsætning af ingredienser under brug.
• Pusher: Bruges til at føre ingredienser gennem føderøret.
• Chopping Blade Assembly: Sharp blades for efficient chopping and blending.
• Disc Accessory: For slicing or grating (refer to specific disc type if included).
• Kontrolkontakt: On/Off and speed selection (if applicable).
• Opladningsport: Til tilslutning af ladekablet.

Figur 2.1: Forside view of the RAF R.2862 Cordless Food Processor.

Figur 2.2: Side view of the RAF R.2862 Cordless Food Processor, showing the control switch.

Figure 2.3: RAF R.2862 Cordless Food Processor with approximate dimensions.

Figure 2.4: The RAF R.2862 Cordless Food Processor shown with its packaging and an example disc accessory.

3. Opsætning og første brug

3.1 Udpakning

1. Fjern forsigtigt alle komponenter fra emballagen.
2. Fjern eventuelle beskyttelsesfilm eller emballagematerialer.
3. Undersøg apparatet for eventuelle skader. Brug det ikke, hvis det er beskadiget.

3.2 Indledende opladning

As this is a cordless appliance, it requires charging before first use.

1. Locate the charging port on the motor base.
2. Connect the provided charging cable to the port and plug the other end into a suitable power outlet.
3. Allow the unit to charge fully. The charging indicator light (if present) will change or turn off when charging is complete. This may take several hours.

3.3 Montering

1. Placer motorbasen på en ren, stabil og tør overflade.
2. Carefully place the chopping blade assembly onto the central shaft inside the processing bowl. Ensure it sits firmly.
3. Place the processing bowl onto the motor base, aligning the tabs and twisting clockwise until it locks into place.
4. Place the lid onto the processing bowl, aligning the tabs and twisting clockwise until it locks securely. The appliance will not operate unless the lid is properly locked.

3.4 Rengøring ved første brug

Before first use, wash all parts that will come into contact with food (processing bowl, lid, blades, pusher, discs) in warm, soapy water. Rinse thoroughly and dry completely.

4. Betjeningsvejledning

4.1 Tilberedning af ingredienser

• Cut large food items into smaller, uniform pieces (approximately 2-3 cm) to ensure even processing.
• Remove any hard pits, bones, or tough skins from fruits and vegetables.

4.2 Processing Food

1. Ensure the food processor is fully assembled and charged.
2. Place the prepared ingredients into the processing bowl. Do not overfill; observe the maximum fill line if indicated.
3. Securely attach the lid by twisting it clockwise until it locks.
4. If using the feeder tube for slicing/grating, place the desired disc onto the shaft before securing the lid. Then, place ingredients into the feeder tube and use the pusher to guide them.
5. Press and hold the control switch to start processing. Release to stop. For pulse action, press and release repeatedly.
6. Process until the desired consistency is achieved.
7. Once processing is complete, release the control switch. Wait for the blades to completely stop before attempting to remove the lid.
8. Twist the lid counter-clockwise to unlock and remove it. Carefully remove the blade assembly before emptying the bowl.

Note: For optimal results and to prevent motor strain, avoid continuous operation for extended periods. Use pulse action for tough ingredients.

5. Vedligeholdelse og rengøring

Regelmæssig rengøring sikrer din foodprocessors lange levetid og hygiejniske drift.

5.1 Adskillelse til rengøring

1. Ensure the appliance is turned off and disconnected from the charger.
2. Remove the lid, then carefully remove the blade assembly or disc.
3. Remove the processing bowl from the motor base.

5.2 Rengøring af komponenter

• Processing Bowl, Lid, Blades, Pusher, Discs: Wash these parts in warm, soapy water. Use a brush for hard-to-reach areas and exercise extreme caution when handling blades. Rinse thoroughly and dry immediately to prevent water spots and rust. These parts may be dishwasher safe (top rack only), but hand washing is recommended for longevity.
• Motorbase: Tør motorbasens yderside af med en blød, tør klud.amp cloth. Do not immerse the motor base in water or rinse it under running water. Ensure it is completely dry before storing or recharging.

5.3 Opbevaring

Store the food processor in a clean, dry place, out of reach of children. Ensure all parts are dry before reassembling for storage.

6. Fejlfinding

Hvis du støder på problemer med din foodprocessor, kan du se følgende almindelige problemer og løsninger:

7. Specifikationer

8. Garanti og support

For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. For technical support or service inquiries, please contact the manufacturer or your local distributor.