NEBO SLYDE King 4K Rechargeable Flashlight and Work Light Instruction Manual

Indledning

This manual provides comprehensive instructions for the safe and effective use of your NEBO SLYDE King 4K Rechargeable Flashlight and Work Light. Please read this manual thoroughly before operating the device and retain it for future reference.

Billede 1: The NEBO SLYDE King 4K, a versatile rechargeable flashlight and work light.

Sikkerhedsoplysninger

For at sikre sikker drift skal du altid følge disse retningslinjer:

• Do not look directly into the LED light. The intense light output can cause temporary vision impairment.
• Opbevares utilgængeligt for børn.
• Do not disassemble the unit. This will void the warranty and may cause damage.
• Brug kun det medfølgende USB-C-opladerkabel eller et tilsvarende certificeret kabel.
• Do not expose the battery to extreme temperatures or fire.
• Sørg for, at dækslet til opladningsporten er forsvarligt lukket, når den ikke oplades, for at opretholde vandtætheden.

Pakkens indhold

Bekræft at alle varer er til stede i din pakke:

• NEBO SLYDE King 4K Flashlight and Work Light
• USB-C to USB Charging Cable
• Snor
• Instruktionsmanual (dette dokument)

Opsætning

Indledende opladning

Before first use, fully charge the NEBO SLYDE King 4K. The device comes with a pre-installed rechargeable lithium-ion battery.

1. Locate the USB-C charging port on the flashlight. It is typically covered by a rubber flap to protect against water and dust.
2. Open the rubber flap and insert the small end of the USB-C charging cable into the port.
3. Connect the larger USB-A end of the cable to a powered USB port (e.g., computer, wall adapter, power bank).
4. The power button will illuminate to indicate charging status. A red light indicates charging, and a blue light indicates a full charge.
5. Opladning tager typisk 4 til 8 timer for en fuld opladning.
6. Once fully charged, disconnect the cable and securely close the rubber flap over the charging port.

Billede 2: The NEBO SLYDE King 4K connected to a USB-C charging cable.

Fastgørelse af snoren

Attach the included lanyard to the designated loop on the flashlight's tail cap for added security and ease of carrying.

Betjeningsvejledning

Tænd/sluk-knap funktioner

The power button controls all light modes and power functions.

• Tryk og slip: Cycles through flashlight modes (High, Low).
• Dobbelt tryk: Activates the work light (COB).
• Tryk og hold: Activates dimming function for current mode.
• Direkte til rødt: When the work light is active, press and hold to switch to red light mode.

Betjening af lommelygte

The front-facing LED flashlight offers powerful illumination and adjustable focus.

1. Tænd/sluk: Press the power button once to turn on the flashlight. Press again to cycle through modes or turn off after a few seconds in a single mode.
2. Tilstande: The flashlight has High (4000 lumens) and Low (400 lumens) modes.
3. Zoom funktion: Twist the head of the flashlight to adjust the beam from a wide floodlight to a focused spotlight (4X zoom).

Billede 3: The NEBO SLYDE King 4K flashlight in use, demonstrating its powerful beam.

Billede 4: Illustrates the 4X zoom capability, switching between floodlight and spotlight modes.

Work Light (COB) Operation

The COB work light provides broad area illumination and features a unique slide-to-reveal design.

1. Aktiver: Slide the body of the flashlight downwards to reveal the COB work light. The work light will automatically turn on.
2. Tilstande: The work light has High (1000 lumens) and Low (100 lumens) white light modes.
3. Rødt lys tilstand: From the white work light mode, press and hold the power button to switch to Red High (40 lumens), Red Low (4 lumens), and Red Flashing (40 lumens) for emergency signaling or preserving night vision.
4. Sluk: Slide the body upwards to conceal the COB work light, which will turn it off. Alternatively, cycle through modes until off, or press and hold the power button.

Billede 5: The innovative slide-to-reveal design of the NEBO SLYDE King 4K, exposing the COB work light.

Billede 6: The COB work light in operation, providing wide-area illumination.

Billede 7: The work light operating in red mode, useful for night vision preservation or signaling.

Magnetisk base

The powerful magnetic base allows for hands-free operation by attaching the flashlight to metallic surfaces.

Billede 8: The magnetic base securely holding the flashlight to a metal surface for hands-free use.

Strømhukommelse

The SLYDE King 4K features power memory, which means it will remember the last used light mode (flashlight or work light, and its intensity) when turned back on, provided it was off for more than 8 seconds.

Opretholdelse

• Rensning: Tør lommelygten af ​​med en blød, damp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Opladningsport: Keep the USB-C charging port clean and free of debris. Ensure the rubber flap is sealed when not charging to maintain water resistance.
• Batteripleje: For optimal battery life, avoid fully discharging the battery frequently. Recharge regularly. If storing for an extended period, charge the battery to approximately 50% every 3-6 months.
• Opbevaring: Opbevar lommelygten på et køligt, tørt sted væk fra direkte sollys og ekstreme temperaturer.

Fejlfinding

Specifikationer

Billede 9: Detailed specifications for each light mode, including output, runtime, and beam distance.

Garanti og support

For warranty information and customer support, please refer to the official NEBO webwebstedet eller kontakt deres kundeservice direkte. Behold din købskvittering som købsbevis.

Online support: Visit NEBO Support Page

Fabrikant: NEBO

Producentens varenummer: NEB-WLT-0031