CAT Construction Workforce Jumbo Tower Crane Set

1. Introduktion

This instruction manual provides comprehensive guidance for the assembly, operation, and maintenance of your CAT Construction Workforce Jumbo Tower Crane Set. Please read this manual thoroughly before use to ensure safe and correct operation. This product is designed for ages 5 and up.

2. Sikkerhedsoplysninger

• Kvælningsfare: Indeholder små dele. Ikke egnet til børn under 3 år.
• Hold altid øje med børn under leg.
• Keep the product away from water and excessive moisture.
• Do not attempt to lift objects heavier than recommended by the manufacturer.
• Sørg for, at alle dele er sikkert samlet før brug.

3. Pakkens indhold

Bekræft, at alle nedenstående komponenter er til stede i din pakke:

• Tower Crane components
• Fjernbetjening
• Articulated Figure (4 inches)
• Freewheeling Skid Steer Vehicle
• Wrecking Ball attachment
• Fastgørelse af krogen
• Magnet vedhæftning
• USB opladningskabel

The set includes various parts for the crane structure, a remote control, a construction figure, a skid steer, and multiple attachments for diverse play scenarios.

4. Monteringsvejledning

The CAT Construction Workforce Jumbo Tower Crane Set is designed for quick and easy assembly. Follow these steps to set up your crane:

1. Attach the base supports to the main base unit.
2. Connect the tower sections, ensuring they lock securely into place.
3. Mount the crane cabin and boom assembly to the top of the tower.
4. Secure the counterweight section to the rear of the boom.
5. Thread the hoist cable through the designated pulleys and attach the desired lifting accessory (hook, wrecking ball, or magnet).

For a visual guide on assembly and initial setup, please refer to the video below:

5. Batteriinstallation

The crane unit is USB rechargeable. Use the provided USB cable to charge the crane's internal battery. The remote control requires 2 AA batteries (included).

1. Til fjernbetjeningen: Locate the battery compartment on the back of the remote. Open the compartment and insert 2 AA batteries, ensuring correct polarity (+/-). Close the compartment securely.
2. For the Crane Unit: Connect the USB charging cable to the designated port on the crane unit. Plug the other end into a compatible USB power source. The crane's light may indicate charging status.

6. Betjeningsvejledning

Once assembled and powered, use the wireless remote control to operate the crane's functions:

• Rotation: Use the directional controls on the remote to rotate the crane's boom 360 degrees.
• Løft/sænk: Use the dedicated buttons to raise or lower the hook and its attached load.
• Trolley Movement: Controls allow the trolley to move along the boom, extending or retracting the hook's reach.
• Arbejdslys: The crane features a built-in light on top that illuminates during operation, enhancing realism.

The set also includes a 4-inch articulated figure and a freewheeling skid steer vehicle for expanded play scenarios.

Observe the crane in action with its various functions:

7. Vedligeholdelse

• Clean the crane and accessories with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
• Opbevar produktet på et køligt, tørt sted væk fra direkte sollys, når det ikke er i brug.
• Remove batteries from the remote control if the toy will not be used for an extended period.

8. Fejlfinding

• Crane not responding: Check if the crane unit is charged and the remote control batteries are correctly installed and have sufficient power. Ensure the crane and remote are within operating range.
• Weak lifting power: Ensure the crane's battery is fully charged. Avoid attempting to lift objects exceeding the crane's capacity.
• Intermitterende drift: Check for any obstructions to the remote control's signal or interference from other electronic devices.

9. Specifikationer

10. Garanti og support

For warranty information and customer support, please refer to the contact details provided on the product packaging or visit the official Funrise, Inc. webwebstedet. Behold din købskvittering som købsbevis.