1. Introduktion
This manual provides detailed instructions for the safe installation, operation, and maintenance of your LUTEC Outdoor Wall Light Fixture, Model B0DTHCF5KD. Please read this manual thoroughly before installation and retain it for future reference.
Image 1: The LUTEC Outdoor Wall Light Fixture, featuring a matte black finish and clear glass panels, shown illuminated.
2. Sikkerhedsoplysninger
ADVARSEL: Risk of electric shock. Turn off power at the circuit breaker or fuse box before installation or servicing. Consult a qualified electrician if you are not familiar with electrical wiring. All wiring connections must be in accordance with local codes, ordinances, or the National Electrical Code (NEC).
- Sørg for, at armaturet er korrekt jordet.
- Overskrid ikke det maksimale wattage specificeret for pæren.
- Håndter glaskomponenter forsigtigt for at forhindre brud.
- Hold emballagemateriale væk fra børn.
3. Pakkens indhold
Kontroller, at alle komponenter er til stede og ubeskadigede, før installationen påbegyndes.
- LUTEC Outdoor Wall Light Fixture (1 unit)
- Monteringsbeslag
- Skruer (2)
- Trådnødder (3)
- Instruktionsbog
Image 2: Diagram showing the product dimensions and the included mounting accessories: two screws and three wire nuts.
4. Opsætning og installation
Before installation, ensure the power is turned off at the circuit breaker. This fixture is designed for hardwired outdoor use.
4.1 Nødvendigt værktøj (medfølger ikke)
- Phillips skruetrækker
- Afisoleringstænger
- Elektrisk tape
- Sikkerhedsbriller
4.2 Installationstrin
- Sluk for strømmen: Locate the circuit breaker controlling the light fixture's power supply and turn it off. Verify power is off using a voltage tester.
- Fjern gammel armatur: Carefully detach and remove the existing light fixture from the wall. Disconnect any existing wiring.
- Monter monteringsbeslag: Secure the provided mounting bracket to the electrical junction box on the wall using the included screws. Ensure it is firmly attached and level.
- Ledningsforbindelser:
- Connect the green ground wire from the fixture to the bare copper or green ground wire from the electrical box using a wire nut.
- Connect the white neutral wire from the fixture to the white neutral wire from the electrical box using a wire nut.
- Connect the black hot wire from the fixture to the black hot wire from the electrical box using a wire nut.
- Ensure all connections are secure and covered with wire nuts. Wrap electrical tape around wire nuts for added security.
- Mount New Fixture: Carefully align the fixture with the mounting bracket and secure it to the wall using the provided screws. Ensure the fixture is flush against the wall.
- Installer pære: Insert an E26 base bulb (max 25W LED, bulb not included) into the socket. The open bottom design allows for easy bulb replacement.
- Gendan strøm: Tænd for strømmen igen ved afbryderen. Test lysarmaturet.
Image 3: Illustration of compatible E26 base bulbs (maximum 25W LED equivalent). Bulb is not included.
5. Betjeningsvejledning
Once installed and powered, the LUTEC Outdoor Wall Light Fixture operates via your existing wall switch. Simply toggle the switch to turn the light on or off.
Image 4: The light fixture is controlled by a standard wall switch.
6. Vedligeholdelse
Regelmæssig vedligeholdelse sikrer optimal ydeevne og levetid for din lampe.
- Rensning: Turn off power before cleaning. Wipe the fixture with a soft, damp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
- Udskiftning af pære: Turn off power before replacing the bulb. Allow the bulb to cool completely. Unscrew the old bulb and screw in a new E26 base bulb (max 25W LED). The open bottom design facilitates easy access.
- Vejrbestandighed: The fixture is constructed from high-quality aluminum and features a clear glass shade, designed to be weather-resistant against rain, snow, sun, and wind.
Image 5: The fixture is IP65 waterproof, designed for durability in various weather conditions.
7. Fejlfinding
Hvis din lampe ikke fungerer korrekt, kan du se følgende almindelige problemer og løsninger:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lyset tændes ikke. | Ingen strøm til armaturet. | Check the circuit breaker and wall switch. Ensure power is on. |
| Løse ledningsforbindelser. | Turn off power at the circuit breaker. Check and tighten all wire connections. | |
| Defekt pære. | Turn off power. Replace the bulb with a new E26 base bulb (max 25W LED). | |
| Lyse flimrer. | Løs pære eller ledninger. | Turn off power. Tighten the bulb. Check and tighten all wire connections. |
8. Specifikationer
- Mærke: LUTEC
- Model: B0DTHCF5KD
- Farve: Sort
- Materiale: Aluminium
- Stil: Moderne
- Værelsestype: Entryway, Doorway, Porch, Hallway
- Produktdimensioner: 4.72 cm L x 4.72 cm B x 7.87 cm H
- Specifikke anvendelser for produktet: Garden (Outdoor Lighting)
- Indendørs/udendørs brug: Udendørs
- Strømkilde: Hardwired
- Antal varer: 1
- Varens vægt: 2.03 pund
- Batterier inkluderet ?: Ingen
- Batterier påkrævet?: Ingen
- Pære base: E26 (pære ikke inkluderet)
- Max Wattage: 25W LED
9. Garanti og support
LUTEC provides high-quality service for its products.
- Returpolitik: Dette produkt er berettiget til refusion/ombytning inden for 2026 dage efter købet.
- Kundeservice: For any issues or inquiries, please contact LUTEC customer service.
