Indledning
Thank you for choosing the WOLFBOX MF100. This comprehensive device combines a powerful electric air duster and a robust 3000A jump starter with an integrated air compressor. Designed for versatility, it provides solutions for cleaning electronics, inflating tires, and jump-starting vehicles. Please read this manual thoroughly before operation to ensure safe and efficient use.
Hvad er der i æsken?
Upon opening the package, verify that all components are present and in good condition. The standard package includes:
- WOLFBOX 3000A Jump Starter with Air Compressor
- WOLFBOX MF100 Elektrisk Luftstøvsuger
- Smart jumper kabler
- USB-C ladekabel
- Air Nozzles for Air Compressor (various types)
- Air Duster Nozzles (5 types)
- Cleaning Brushes for Air Duster (2 types)
- Opbevaringskasse
- Brugermanual
Opsætning
Jump Starter & Air Compressor
- Indledende opkrævning: Before first use, fully charge the jump starter unit using the provided USB-C cable. The display will indicate charging status.
- Tilbehørsforbindelse: For air compression, connect the air hose to the designated port on the unit. Select and attach the appropriate nozzle for your inflation needs (e.g., tire valve, ball needle).
Elektrisk Air Duster
- Dysefastgørelse: Select the desired nozzle or brush for your cleaning task. Align the nozzle with the air outlet of the duster and push firmly until it clicks into place.
- Opladning: Ensure the air duster is charged before use. Connect it to a USB power source using its charging cable.
Betjeningsvejledning
Using the 3000A Jump Starter
- Tilslut Clamps: Sørg for, at jumpstarteren er slukket. Tilslut den røde stikkontakt.amp to the positive (+) terminal of the vehicle's dead battery and the black clamp til den negative (-) terminal.
- Tilslut til jumpstarter: Plug the smart jumper cable connector into the jump starter's port.
- Start køretøj: Once connected, turn on the jump starter. The display will show readiness. Attempt to start your vehicle. If it doesn't start immediately, wait 30 seconds before trying again.
- Afbryde: After the vehicle starts, disconnect the smart jumper cable from the jump starter first, then remove the black clamp, efterfulgt af den røde clamp fra batteriet.
Using the 160PSI Air Compressor
- Tilslut slange: Attach the air hose to the tire valve or item to be inflated.
- Sæt tryk: Turn on the unit. Use the controls to set the desired pressure (PSI, BAR, KPA). The current pressure will be displayed.
- Start inflation: Press the inflation button to begin. The compressor will automatically stop once the preset pressure is reached.
- Afbryde: Remove the air hose from the item.
Using the Electric Air Duster
- Tænd: Press and hold the power button to turn on the duster.
- Juster hastighed: Briefly press the power button to cycle through the 3 available speed settings (40,000 RPM, 80,000 RPM, 150,000 RPM).
- Direct Airflow: Aim the nozzle at the area to be cleaned. Use short bursts for delicate items or continuous airflow for larger areas.
- Sluk: Press and hold the power button to turn off the duster.
Powerbankens funktionalitet
The jump starter unit also functions as a power bank. Connect your devices (phones, tablets, etc.) to the USB-C (65W) or USB-A (12W/18W) ports for charging. The 160W DC continuous output can power other compatible devices.
Opretholdelse
- Rensning: Wipe both units with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners. Ensure no moisture enters the ports.
- Batteripleje: For optimal battery life, fully charge both the jump starter and air duster every 3-6 months, even if not in use. Avoid storing in extreme temperatures.
- Opbevaring: Store the units and accessories in the provided storage case in a cool, dry place, away from direct sunlight and moisture.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Jump Starter not turning on/charging. | Low battery; faulty charging cable/adapter. | Charge the unit fully. Try a different USB-C cable and power adapter. |
| Vehicle not starting with jump starter. | Forkert klamp connection; battery too deeply discharged; vehicle issue. | Sørg for, at clamps are connected correctly (red to +, black to -). Ensure jump starter is fully charged. Consult a mechanic if vehicle issues persist. |
| Air Compressor not inflating. | Hose not securely connected; incorrect pressure setting; low unit battery. | Check hose connection. Verify pressure setting. Charge the unit. |
| Electric Air Duster not blowing. | Low battery; nozzle blockage. | Charge the duster. Check for and clear any obstructions in the nozzle or air intake. |
Specifikationer
- WOLFBOX MF100 Electric Air Duster:
- Max RPM: 150,000 RPM
- Max Wind Speed: 45 m/s
- Speed Settings: 3 (40,000 RPM, 80,000 RPM, 150,000 RPM)
- Nozzles: 5 types
- Brushes: 2 types
- Vægt: Cirka 0.66 lbs (0.3 kg)
- Dimensions: L6.2*W1.6*H2.4 inches (L16*W4*H6 cm)
- WOLFBOX 3000A Jump Starter with Air Compressor:
- Spidsstrøm: 3000A
- Batterikapacitet: 16000mAh
- Engine Compatibility: Up to 8L Gas / 6L Diesel
- Air Compressor Pressure: 160 PSI (Max)
- Airflow Rate: 45 liters per minute
- Charging Ports: USB-C 65W, USB-A 12W/18W
- DC Output: 160W continuous
Garanti og support
WOLFBOX products are designed for reliability and performance. For any questions, technical assistance, or warranty claims, please contact WOLFBOX customer support. Refer to the product packaging or the official WOLFBOX webhjemmeside for de seneste kontaktoplysninger.
Webwebsted: www.wolfbox.com
