Produkt overview
The Winix 5520 Air Purifier is designed to provide clean and healthy indoor air. It features a comprehensive 4-stage air purification system capable of capturing 99.99% of airborne allergens and pollutants as small as 0.01 microns. This includes dust, pollen, pet dander, and smoke. The unit incorporates Smart Sensors for real-time air quality monitoring and an Auto Mode for efficient operation. PlasmaWave® Technology further enhances air cleaning by breaking down pollutants at a molecular level.
Figur 1: Forside view of the Winix 5520 Air Purifier.
Opsætning
1. Unpacking and Filter Preparation
Before initial use, remove the air purifier from its packaging. Open the front panel to access the filters. The True HEPA filter and Carbon filter come sealed in plastic bags. It is crucial to remove these plastic bags before operating the unit. The washable Fine Mesh Pre-Filter does not come in a bag.
Figure 2: Filters being removed from the Winix 5520 Air Purifier for initial setup.
2. Filter Installation Order
- Insert the True HEPA Filter first.
- Place the Advanced Odor Control (AOC) Carbon Filter on top of the HEPA filter.
- Finally, secure the Washable Fine Mesh Pre-Filter.
Luk frontpanelet forsvarligt.
3. Placering
Place the air purifier on a firm, level surface. Ensure there is at least 6-12 inches of space from walls or furniture to allow for optimal airflow. The unit is designed to clean rooms up to 1,882 sq ft in 1 hour (based on 1 Air Change Per Hour).
Figure 3: Optimal placement of the air purifier in a large room.
4. Strømtilslutning
Sæt netledningen i en almindelig stikkontakt.
Betjeningsvejledning
Kontrolpanel overview
The Winix 5520 features capacitive touch buttons that illuminate upon touch. The control panel includes:
- Power knap: Turns the unit On/Off. Plays a short tune when activated.
- Luftkvalitetsindikator: An LED light bar on the front of the unit that visually displays real-time air quality.
- Ventilatorhastighedsknap: Toggles between four fan speed settings (Low, Medium, High, Turbo), Sleep Mode, and Auto Mode.
- Wi-Fi knap: Enables Wi-Fi connectivity for app control.
- PlasmaWave® Button: Activates or deactivates the PlasmaWave® Technology.
- Indikator for filterudskiftning: Illuminates when filters need replacement. Press and hold for 5 seconds to reset after filter replacement.
Luftkvalitetsindikator
The air quality indicator provides immediate feedback on your indoor air quality:
- Rød: Indicates poor air quality.
- Orange: Indicates fair air quality.
- Blå: Indicates very good air quality.
Poor Air Quality (Red)
Fair Air Quality (Orange)
Good Air Quality (Blue)
Driftsformer
- Automatisk tilstand: The unit's built-in Smart Sensors detect and monitor the quality of air and automatically adjust fan speeds to ensure efficient cleaning.
- Sove mode: Automatically activated when the room is darkened, providing quiet, energy-efficient operation by dimming LEDs and reducing fan speed.
- Manuel blæserhastighed: Cycle through Low, Medium, High, and Turbo speeds using the fan speed button.
Wi-Fi og app-kontrol
The Winix 5520 can be controlled remotely via the Winix Smart App. Press the Wi-Fi button on the unit to enable connectivity. Through the app, you can:
- Planlæg rengøringstider.
- Track air quality history in real-time.
- Toggle PlasmaWave® on/off.
- Juster ventilatorhastighederne.
- Power the unit on/off.
Figure 4: Control your Winix 5520 via the Winix Smart App.
Opretholdelse
Filtersystem overview
The Winix 5520 utilizes a 4-stage filtreringssystem:
- Washable Fine Mesh Pre-Filter: Captures larger airborne particles. Clean approximately once a month.
- Advanced Odor Control (AOC) Carbon Filter: Reduces VOCs and household odors. Helps prolong True HEPA Filter life.
- Ægte HEPA-filter: Captures 99.99% of airborne allergens as small as 0.01 microns.
- PlasmaWave® Technology: Breaks down pollutants at the molecular level.
Figur 5: Avanceret 4-Stage Filtration with PlasmaWave® Technology.
Udskiftning af filter
The Filter Replacement Indicator LED will illuminate when the filters need to be replaced. The True HEPA and Carbon filters typically last up to one year, depending on usage and air quality.
- Åbn frontpanelet.
- Remove the used filters.
- Insert the new filters in the correct order (HEPA first, then Carbon, then Pre-Filter).
- Luk frontpanelet.
- Press and hold the Filter Replacement Indicator button for approximately 5 seconds to reset the indicator.
Fejlfinding
If your Winix 5520 Air Purifier is not operating as expected, please check the following:
- Ingen strøm: Sørg for, at netledningen er korrekt tilsluttet en fungerende stikkontakt.
- Reduceret luftstrøm: Check if the filters are clean and properly installed. Ensure plastic bags have been removed from new filters.
- Usædvanlig støj: Verify that no foreign objects are obstructing the fan.
- Air Quality Indicator Not Changing: Ensure the air quality sensor is clean.
- Problemer med Wi-Fi-forbindelse: Refer to the Winix Smart App instructions for troubleshooting connection problems.
For persistent issues, please contact Winix customer support.
Specifikationer
| Feature | Specifikation |
|---|---|
| Mærke | Winix |
| Modelnummer | 5520 |
| Farve | Sort |
| Produktdimensioner | 8.3" D x 13.6" B x 22.7" H |
| Dækning af gulvareal | Up to 1882 sq ft (1 air change/hr) |
| Støjniveau | 27 dB |
| Partikelretentionsstørrelse | 0.01 mikron |
| Controller type | Amazon Alexa, Wi-Fi |
| Wattage | 50 watt |
| Varens vægt | 13.3 pund |
| Inkluderede komponenter | 1 AOC Carbon Filter, 1 Pre-Filter, 1 True HEPA Filter, 5510 Air Purifier |
Figure 6: Dimensions of the Winix 5520 Air Purifier.
Garanti og support
Garantioplysninger
The Winix 5520 Air Purifier is backed by a 2 års garanti. Winix will repair or replace your unit if it meets the qualifying conditions.
Yderligere support
For yderligere hjælp kan du se den officielle brugermanual i PDF-format: Winix 5520 User Manual (PDF).
Visit the official Winix Store for more products and support: Winix-butikken på Amazon.
