LEHMANN LGALM-4037

LEHMANN LGALM-4037 Cordless Lawnmower User Manual

Model: LGALM-4037

1. Introduktion

Thank you for choosing the LEHMANN LGALM-4037 Cordless Lawnmower. This manual provides essential information for the safe and efficient operation, assembly, maintenance, and troubleshooting of your new lawnmower. Please read this manual thoroughly before first use and keep it for future reference.

The LGALM-4037 is designed for efficient lawn care, featuring a 37 cm cutting width, a 40-liter grass collection bag, and a 5-step cutting height adjustment from 25 mm to 75 mm. It is powered by a 4.0 Ah battery, providing cordless convenience for lawns up to 400 m².

LEHMANN LGALM-4037 Cordless Lawnmower with battery and charger

Image 1.1: The LEHMANN LGALM-4037 Cordless Lawnmower, including the battery and charger.

2. Sikkerhedsinstruktioner

ADVARSEL: Læs alle sikkerhedsadvarsler, instruktioner, illustrationer og specifikationer, der følger med dette elværktøj. Undladelse af at følge alle instruktionerne nedenfor kan resultere i elektrisk stød, brand og/eller alvorlig personskade.

3. Pakkens indhold

Pak forsigtigt alle varer ud, og sørg for, at du har modtaget følgende komponenter:

If any items are missing or damaged, please contact LEHMANN customer support immediately.

4. Samling og opsætning

4.1. Håndtagssamling

  1. Attach the lower handle section to the main mower body using the provided bolts and knobs. Ensure it is securely fastened.
  2. Connect the upper handle section to the lower handle section, aligning the holes and securing with the remaining bolts and knobs.
  3. Route any cables along the handle and secure them with the cable clips provided.

4.2. Samling af græsopsamlingspose

Assemble the grass collection bag by attaching the fabric bag to the plastic frame. Ensure all clips are securely fastened.

4.3. Opladning og installation af batteri

  1. Before first use, fully charge the 4.0 Ah battery using the supplied charger. Connect the charger to a power outlet and insert the battery. The indicator lights on the charger will show the charging status.
  2. Once charged, slide the battery into the battery compartment on the lawnmower until it clicks into place.
  3. Insert the safety key into its slot next to the battery. The mower will not operate without the safety key inserted.
LEHMANN 40V battery and charger with charging indicator

Image 4.1: The 40V Lithium-Ion battery and charger. Ensure the battery is fully charged before use.

5. Betjening

5.1. Start og stop af plæneklipperen

  1. Ensure the battery is installed and the safety key is inserted.
  2. Tryk og hold sikkerhedsknappen på håndtaget nede.
  3. While holding the safety button, pull the bail lever towards the handle. The motor will start.
  4. To stop the lawnmower, release the bail lever. The motor will stop immediately.

5.2. Justering af klippehøjde

The LEHMANN LGALM-4037 offers 5 cutting height positions, ranging from 25 mm to 75 mm. To adjust the cutting height:

  1. Ensure the lawnmower is turned off and the safety key is removed.
  2. Find højdejusteringshåndtaget på siden af ​​plæneklipperen.
  3. Pull the lever outwards and move it to the desired height setting. Release the lever to lock it into position.
Diagram showing 5 cutting height adjustments from 25mm to 75mm

Image 5.1: The 5-step cutting height adjustment mechanism, ranging from 25 mm to 75 mm.

5.3. Klippetips

LEHMANN LGALM-4037 Lawnmower in action on a lawn, indicating 400 square meter coverage

Image 5.2: The LGALM-4037 is recommended for lawns up to 400 m².

Top-down view of the lawnmower showing a 37 cm cutting path

Image 5.3: The lawnmower features a 37 cm cutting width for efficient mowing.

6. Vedligeholdelse

WARNING: Always remove the safety key and battery before performing any maintenance or cleaning.

6.1. Rensning

6.2. Knivpleje

Periodically inspect the cutting blade for sharpness and damage. A dull or damaged blade can lead to poor cutting performance and increased motor strain. If necessary, have the blade sharpened or replaced by a qualified service technician.

6.3. Batteriopbevaring

Store the battery in a cool, dry place, away from direct sunlight and extreme temperatures. For long-term storage, it is recommended to store the battery with a partial charge (around 50%) to prolong its lifespan.

7. Fejlfinding

ProblemMulig årsagLøsning
Plæneklipperen starter ikkeBatteri ikke opladet
Sikkerhedsnøgle ikke indsat
Bail lever not engaged
Overbelastningsbeskyttelse aktiveret
Oplad batteriet
Insert safety key fully
Engage bail lever fully
Allow motor to cool down, remove obstruction
Dårlig skæreydelseMat eller beskadiget klinge
Klippehøjden er for lav til græs
Græsopsamlingspose fuld
Slib eller udskift kniven
Øg klippehøjden
Empty grass collection bag
Overdreven vibrationBeskadiget eller ubalanceret blad
Løse komponenter
Inspicer og udskift bladet om nødvendigt
Kontroller alle fastgørelseselementer og spænd efter behov
Motor stopper under driftLavt batteri
Overload due to thick grass
Blokering i bladområdet
Genoplad batteriet
Raise cutting height, mow slower
Remove obstruction (with battery removed)

8. Specifikationer

FeatureSpecifikation
ModelnummerLGALM-4037
MærkeLEHMANN
StrømkildeBatteri (40V)
Batterikapacitet4.0 Ah
Skærebredde37 cm
Justering af klippehøjde5 positioner (25 mm - 75 mm)
Græsopsamlingsposekapacitet40 liter
Anbefalet græsplænearealOp til 400 m²
MotortypeBrushless Induction Motor
Produktmål (L x B x H)128 x 42 x 105 cm
Varens vægt12.5 kg
FarveSort/rød
Infographic showing key specifications: 14.5 kg, 40V, 4.0Ah, 40L, Battery, 37 cm, 25-75 cm, No smog

Image 8.1: Key specifications of the LEHMANN LGALM-4037 Lawnmower.

Illustration of a 40 Volt Induction Motor

Image 8.2: The powerful 40 Volt Induction Motor provides efficient performance.

9. Garanti og support

LEHMANN-produkter er fremstillet efter høje kvalitetsstandarder og er garanteret mod fabrikationsfejl. For specifikke garantivilkår henvises til garantikortet, der følger med dit produkt, eller besøg den officielle LEHMANN-side. webwebsted.

For technical support, spare parts, or service inquiries, please contact LEHMANN customer service. When contacting support, please have your model number (LGALM-4037) and purchase date ready.

Du kan finde mere information og kontaktoplysninger på LEHMANN Butik på Amazon.

Relaterede dokumenter - LGALM-4037

Preview Lehmann Firmware Updater: Brugsanvisning til låse og RFID-læsere
Dette dokument indeholder betjeningsvejledning til LEHMANN Firmware Updater-softwaren, der beskriver, hvordan man opdaterer firmware på Lehmann-låse, RFID-læsere og terminaler. Indeholder systemkrav, kompatible produkter og trinvis vejledning.
Preview Brugervejledning til LEHMANN Management Software: Konfiguration og drift
Omfattende brugervejledning til LEHMANN Management Software (LMS), der beskriver konfiguration, betjening og administration af LEHMANN RFID-systemer i både offline og online tilstand. Dækker transponder- og låseadministration, brugerindstillinger og systemadministration.
Preview LEHMANN CNC-rotationsborde - Hovedkatalog Udgave 4 | PGD-, E- og DD-serien
LEHMANNs hovedkatalog, udgave 4, til CNC-drejeborde. Udforsk PGD, E-serien, DD-serien og mere. Højhastighedsløsninger uden slør til industriel automatisering og præcisionsfremstilling.
Preview LEHMANN Primary und Secondary Controller Bedienungsanleitung
Diese Bedienungsanleitung beschreibt die Installation, Konfiguration und Wartung der LEHMANN Primary und Secondary Controller für das Captos und Captos iCharge RFID-Schließsystem.
Preview LEHMANN M610 LEGIC L043-A03 Elektronisk Skabslås Brugsanvisning
Omfattende betjeningsvejledning til den elektroniske skabslås LEHMANN M610 LEGIC L043-A03, der dækker installation, programmering, betjening, vedligeholdelse og fejlfinding.
Preview LEHMANN RFID Kartprogrammering: Anleitung og Übersicht
Erfahren Sie, wie Sie LEHMANN RFID-Schließsysteme mit diverse Karten med Installations-, Master- og User-Karten programmieren. Diese Anleitung erklärt die Betriebsmodi, Funktionen og den Reset-Prozess.