VINGLI Metal Bunk Bed Frame Twin Over Twin with LED Lights and Charging Station

1. Introduktion

This manual provides detailed instructions for the assembly, operation, and maintenance of your VINGLI Metal Bunk Bed Frame. Please read this manual thoroughly before assembly and use to ensure safe and proper functionality of the product.

Nøglefunktioner:

• Robust metalkonstruktion: Made from 100% solid metal for durability and stability.
• Forbedret sikkerhed: Features a non-slip ladder, rounded-corner guardrails, and a 13.4-inch high full-length guardrail for maximum protection.
• Integreret ladestation: Includes 1 Type-C port, 1 USB port, and 2 AC outlets for convenient device charging.
• Tilpasset LED-belysning: LED lights with 7 basic colors, adjustable brightness, and control via remote or mobile app to create a personalized ambiance.
• Pladsbesparende design: Twin over Twin configuration with 8 inches of under-bed clearance for additional storage.
• Nem montering: Snap-on slat installation for simplified setup.

2. Vigtige sikkerhedsadvarsler

Manglende overholdelse af disse advarsler kan resultere i alvorlig personskade.

• Saml altid i henhold til de medfølgende instruktioner for at sikre stabilitet.
• Vær forsigtig med klemmepunkter og skarpe kanter under montering og brug.
• Do not exceed the maximum weight recommendation of 400 pounds (181 kg) per bed.
• Keep the area around the bed clear to prevent tripping hazards.
• Den øverste køjeseng er ikke egnet til børn under 6 år.
• Sørg for, at alle forbindelser er tætte før brug, og kontroller dem regelmæssigt.
• Use only mattresses that are 8 inches or less in thickness for the upper bunk to maintain proper guardrail height.
• Fastgør eller hæng ikke genstande på nogen del af køjesengen, som ikke er beregnet til brug sammen med sengen; f.eks.ampmen ikke begrænset til, kroge, bælter eller sjippetove.
• Brug altid stigen til at komme ind og ud af den øverste køje.

3. Pakkens indhold

Verify that all components listed below are present before beginning assembly. If any parts are missing or damaged, please contact VINGLI customer support.

• Bunk Bed Frame Components (Metal beams, slats, ladder)
• Autoværn
• Light Kit (LED strip, remote control)
• Ladestationsenhed
• Assembly Hardware (Screws, bolts, nuts, washers)
• Assembly Tools (Hex key, wrench)
• Instruktionsmanual

4. Specifikationer

Bemærk: Alle dimensioner er omtrentlige.

5. Opsætning og montering

Assembly of the VINGLI Metal Bunk Bed Frame requires careful attention to detail. It is highly recommended to have two people for assembly, especially when lifting and aligning larger components.

Trin for generalforsamling:

1. Udpak og identificer dele: Lay out all components and hardware on a clean, soft surface. Compare them with the parts list in your included instruction manual to ensure everything is present and undamaged.
2. Saml sengegavle: Attach the horizontal support bars to the vertical posts for both the upper and lower bed ends. Ensure all bolts are finger-tight at this stage.
3. Tilslut sideskinner: With assistance, carefully lift and connect the side rails to the assembled bed ends. This step often requires holding the bed ends upright while securing the rails.
4. Installer lameller: The bed features a snap-on slat design for convenience. Securely attach all slats to the bed frame. Ensure they are firmly in place to provide adequate mattress support.
5. Fastgør stige: Secure the non-slip ladder to the designated attachment points on the bunk bed frame.
6. Installer rækværk: Attach the full-length guardrails to the upper bunk. Verify they are securely fastened.
7. Installer ladestation: Mount the removable charging station to the upper bunk's frame as indicated in the manual.
8. Installer LED-lys: Adhere the LED light strip to the underside of the upper bunk or desired location. Connect it to the power source.
9. Endelig stramning: Når alle komponenter er på plads, skal alle bolte og skruer systematisk strammes med det medfølgende værktøj. Undgå at overspænde.
10. Placering: Position the assembled bunk bed in its final location. Consider using wall anchoring if desired for added stability (check local regulations).

For detailed, step-by-step visual guidance, refer to the included assembly manual and the official product video below.

Image: Overall dimensions of the VINGLI Metal Bunk Bed Frame.

Image: Wall anchoring mechanism for enhanced stability.

Image: Detail of the snap-in mounting system for bed slats.

6. Betjeningsvejledning

6.1. Brug af LED-lys

The integrated LED lights offer customizable illumination for the lower bunk area. They can be controlled via the included remote control or a dedicated mobile application.

• Tænd/sluk: Use the 'ON' or 'OFF' buttons on the remote to turn the lights on or off.
• Farvevalg: Choose from 7 basic colors using the color buttons on the remote.
• Justering af lysstyrke: Adjust the light intensity using the brightness control buttons.
• Valg af tilstand: Cycle through various lighting modes (e.g., flash, strobe, fade, smooth) using the 'MODE' buttons.
• Hastighedstilpasning: For dynamic modes, adjust the speed of color changes using the 'SPEED' buttons.
• Mobil app kontrol: Download the specified mobile application (refer to the light kit instructions for app name and QR code) to access additional customization options, including a wider color palette and DIY lighting effects.

Image: VINGLI bunk bed with LED lights activated.

Image: Remote control for the Smart RGB LED lights.

6.2. Brug af ladestationen

The removable charging station provides convenient power access for your electronic devices.

• Strømtilslutning: Ensure the charging station is properly plugged into a functional wall outlet.
• AC stikkontakter: Use the two standard AC outlets (125V/12A) for devices requiring a wall plug.
• USB-porte: Utilize the 1 Type-C port (5V/2A) and 1 USB port (5V/2A) for charging compatible smartphones, tablets, and other USB-powered devices.
• Sikkerhed: Do not overload the charging station. Disconnect devices when not in use.

Image: Removable charging station with AC and USB ports.

7. Vedligeholdelse

7.1. Rensning

• Tør metalrammen af ​​med en blød kludamp klæde.
• Undgå at bruge skrappe kemikalier eller slibende rengøringsmidler, da disse kan beskadige overfladen.
• For the charging station, ensure it is unplugged before wiping with a dry cloth. Do not use liquid cleaners directly on the ports.

7.2. Regelmæssig kontrol

• Kontrollér regelmæssigt alle bolte og skruer for at sikre, at de forbliver stramme. Efterspænd efter behov.
• Inspect the ladder and guardrails for any signs of wear or damage.
• Ensure the LED light strip and charging station cables are not pinched or damaged.

8. Fejlfinding

Almindelige problemer og løsninger:

• Sengen føles ustabil: Ensure all assembly bolts are securely tightened. Check that the bed is placed on a level surface. Consider using wall anchoring if not already implemented.
• LED-lys virker ikke: Check if the power adapter is properly plugged into both the wall outlet and the LED strip. Ensure the remote control has working batteries and is pointed directly at the receiver. Try controlling with the mobile app if available.
• Ladestationen leverer ikke strøm: Verify the charging station's power cord is securely plugged into a live wall outlet. Test the outlet with another device. Ensure devices are properly connected to the ports.
• Manglende dele under montering: Refer to the package contents list. If parts are genuinely missing, contact VINGLI customer support with your purchase details.

9. Garanti og support

For warranty information, specific return policies, or technical support, please refer to the documentation included with your purchase or visit the official VINGLI store page on Amazon. Customer support is available to assist with any product-related inquiries.

Visit the VINGLI Store: VINGLI Official Store