1. Introduktion
The GRABO High-Flow Cordless Vacuum Lifter is an advanced portable electric tool designed for efficiently handling challenging objects and porous materials. It utilizes improved vacuum technology to provide a secure grip on various surfaces, including dry cast pavers, concrete, tiles, and stone slabs. This manual provides essential information for the safe and effective operation, setup, and maintenance of your GRABO High-Flow lifter.
Image 1.1: The GRABO High-Flow Cordless Vacuum Lifter and its canvas carrying case.
2. Sikkerhedsoplysninger
WARNING: Read all safety warnings and instructions before operating this tool. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.
2.1 Generel sikkerhed
- Bær altid passende personlige værnemidler (PPE) såsom sikkerhedsbriller og handsker.
- Sørg for, at arbejdsområdet er frit for forhindringer og godt oplyst.
- Brug ikke værktøjet i eksplosive atmosfærer, såsom i nærheden af brændbare væsker, gasser eller støv.
- Hold børn og omkringstående væk, mens du betjener værktøjet.
- Gå ikke for langt. Oprethold korrekt fodfæste og balance til enhver tid.
- Undersøg værktøjet og tilbehøret for skader før hver brug. Må ikke anvendes, hvis det er beskadiget.
2.2 Batterisikkerhed
- Use only GRABO-approved batteries and chargers.
- Udsæt ikke batterier for vand eller ekstreme temperaturer.
- Kortslut ikke batteripolerne.
- Oplad batterier i et godt ventileret område.
- Bortskaf batterier korrekt i henhold til lokale regler.
3. Pakkens indhold
The GRABO High-Flow Kit includes the following components:
- GRABO High-Flow Tool
- Suction Plate 300mm with SMART CUT Foam Seal
- Two (2) GRABO High-Flow 20V Batteries
- Batterioplader
- T-Bar Handle Attachment with Wired Remote Control ON/OFF Cable
- Spare SMART CUT Foam Seal 300mm
- Ekstra filter
- Brugermanual (dette dokument)
- HIGH FLOW Canvas Carrying Case
Note: A 400mm Suction Plate is available as an add-on and is not included in the standard kit.
Billede 3.1: Overview of the GRABO High-Flow kit components, including the tool, T-bar handle, suction plate, batteries, and charger.
4. Opsætning
4.1 Opladning og montering af batteriet
- Tilslut batteriopladeren til en stikkontakt.
- Insert a GRABO High-Flow 20V battery into the charger. The indicator light on the charger will show the charging status.
- Når det er fuldt opladet, skal du fjerne batteriet fra opladeren.
- Align the charged battery with the battery slot on the GRABO High-Flow tool and slide it in until it clicks securely into place.
4.2 Attaching the Suction Plate
- Sørg for, at værktøjet er slukket.
- Align the Suction Plate (300mm or optional 400mm) with the base of the GRABO High-Flow tool.
- Secure the suction plate using the designated clips or fasteners on the tool. Ensure it is firmly attached to prevent air leaks.
Billede 4.1: Side view illustrating the attachment of the suction plate to the main tool body.
4.3 Attaching the T-Bar Handle
For enhanced ergonomics and control, especially with larger materials, attach the T-Bar handle:
- Locate the attachment points on the GRABO High-Flow tool.
- Connect the T-Bar handle to these points, ensuring it is securely fastened.
- Connect the wired remote control ON/OFF cable from the T-Bar handle to the corresponding port on the main tool.
Image 4.2: The T-Bar handle, designed for improved grip and control.
5. Betjeningsvejledning
5.1 Tænd og sluk
- To power on the tool, press the ON/OFF button located on the pistol grip or the remote control on the T-Bar handle.
- To power off, press the ON/OFF button again.
5.2 Understanding the LED Pressure Display
The GRABO High-Flow features a large LED digital display that shows real-time PSI or BAR pressure. This display allows users to monitor the vacuum pressure being created, ensuring a secure grip on the material.
Image 5.1: Close-up of the LED display indicating vacuum pressure and battery status.
5.3 Lifting Materials
- Ensure the SMART CUT foam seal is clean and free of debris.
- Place the GRABO High-Flow tool firmly onto the surface of the material to be lifted.
- Press the ON/OFF button to activate the vacuum. The tool will begin to create suction.
- Monitor the LED display to confirm sufficient pressure has been achieved for a secure lift.
- Carefully lift and move the material using the pistol grip or T-Bar handle.
- To release the material, press the ON/OFF button to deactivate the vacuum.
Image 5.2: Demonstrating the GRABO High-Flow in use, lifting a dry cast paver.
5.4 Lifting Capacity
The lifting capacity of the GRABO High-Flow depends on the suction plate used:
- Med 400mm Suction Plate (optional add-on): Up to 242 lbs (110 kg)
- Med 300mm Suction Plate (included): Up to 150 lbs (68 kg)
Always ensure the chosen suction plate is appropriate for the weight and porosity of the material being lifted.
6. Vedligeholdelse
6.1 Cleaning the SMART CUT Foam Seal
Regularly inspect the foam seal for wear, tears, or debris. A damaged or dirty seal can compromise suction performance.
- Power off the tool and remove the battery.
- Carefully detach the suction plate.
- Clean the foam seal with a damp klæde. Undgå skrappe kemikalier.
- Allow the seal to dry completely before reattaching or storing.
- Replace the foam seal if it shows signs of significant wear or damage (a spare seal is included).
6.2 Udskiftning af filteret
The GRABO High-Flow includes an extra filter. Replace the filter periodically or if you notice a decrease in vacuum performance.
- Power off the tool and remove the battery.
- Locate the filter compartment (refer to diagrams in the physical manual if available).
- Remove the old filter and insert the new one, ensuring it is seated correctly.
- Luk filterrummet forsvarligt.
6.3 Batteripleje og -opbevaring
- Opbevar batterier på et køligt, tørt sted væk fra direkte sollys.
- Do not store fully discharged batteries for extended periods. Charge them periodically.
- If the tool will not be used for a long time, remove the battery.
7. Fejlfinding
This section addresses common issues you might encounter with your GRABO High-Flow tool.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Værktøjet tænder ikke. | Batteriet er ikke opladet eller ikke korrekt installeret. | Sørg for, at batteriet er fuldt opladet og isat sikkert. |
| Loss of suction or weak grip. |
|
|
| Tool picks up one paver then stops working. |
|
|
| Reduced lifting capacity. |
|
|
8. Specifikationer
| Mærke | GRABO |
| Modelnummer | GHF-V1-005530 |
| UPC | 840082400943 |
| Strømkilde | Batteridrevet (20V) |
| Vacuum Flow Rate | 1.5 m³/min |
| Lifting Capacity (with 400mm Suction Plate) | Op til 242 lbs (110 kg) |
| Lifting Capacity (with 300mm Suction Plate) | Op til 150 lbs (68 kg) |
| Anbefalede anvendelser | Lifting, Moving, Installing Heavy and Porous Materials (e.g., Dry Cast Pavers, concrete, tiles, stone slabs) |
| Særlige funktioner | Cordless, Portable, Pistol Grip Design, LED Pressure Display, SMART CUT Foam Seal, T-Handle, High Flow Rate, Real-Time PSI/BAR Reading |
| Varedimensioner (L x B x H) | 14.5 x 14 x 10.5 tommer |
| Varens vægt | 17.99 pund |
| Fabrikant | Grabo |
| Varenummer | GP-1Li-FB-1S-HC |
9. Garanti og support
9.1 Garantioplysninger
Warranty terms and conditions for the GRABO High-Flow Cordless Vacuum Lifter are typically provided with your purchase documentation. Please refer to the warranty card or contact GRABO customer service for detailed information regarding warranty coverage, duration, and claims procedures.
9.2 Kundesupport
For technical assistance, spare parts, or any questions not covered in this manual, please contact GRABO customer support. Contact information can usually be found on the GRABO webwebstedet eller på din produktemballage.
When contacting support, please have your product model number (GHF-V1-005530) and purchase date ready.
