1. Introduktion
The Sygonix SY-6421352 RFID Code Keypad is a robust and secure access control solution designed for various environments, including corporate buildings, leisure facilities, and smart homes. It offers flexible access methods via PIN, RFID card, or a combination of both. With an IP66 weather-resistant die-cast zinc housing and illuminated keys, it ensures reliable operation even in challenging conditions.
2. Sikkerhedsoplysninger
- Læs alle instruktioner omhyggeligt før installation og brug.
- Ensure proper power supply (12V DC/AC, 24V DC/AC) to avoid damage.
- Installationen skal udføres af kvalificeret personale for at forhindre elektriske farer.
- Do not expose the device to extreme temperatures or corrosive substances.
- Regularly check for signs of wear or damage. Disconnect power before any maintenance.
3. Pakkens indhold
Bekræft at alle varer er til stede i pakken:
- Sygonix SY-6421352 RFID Code Keypad
- Monteringsmærkat
- 4 x skruer
- 4x Vægstik
- Sekskantet hovedskrue
- Nøgle
- Ledningsnet
- 2 x dioder
- 2x Piezo resistors
- Brugermanual
4. Specifikationer
| Feature | Specifikation |
|---|---|
| Adgangsmetoder | PIN / Card / PIN + Card |
| Brugerkapacitet | Op til 1010 brugere |
| Relæudgange | 2 |
| RFID-frekvens | EM125 kHz |
| Materiale | Trykstøbt zink |
| Ingress Protection (IP) Rating | IP66 (vejrbestandig) |
| Display Type | LED |
| Tastatur | Oplyst |
| Voltage | 12V DC/AC, 24V DC/AC |
| Vægt | 400 gram |
5. Installation
5.1 Unpacking and Component Overview
Carefully remove the keypad and all accessories from the packaging. Familiarize yourself with the keypad's front and back, noting the wiring harness connection point.
5.2 Ledningsdiagram
Følgende video giver en detaljeret oversigtview of the wiring connections for the access control system, including the keypad, lock, power supply, exit button, proximity card reader, and doorbell. Ensure all connections are secure and follow local electrical codes.
6. Betjeningsvejledning
6.1 Oplåsning af døren
The keypad supports various unlocking methods: card only, PIN only, or a combination of card and PIN. The following video illustrates these methods.
6.2 Adding User Settings
To grant access, you need to add user cards or PINs to the system. The video below explains the process for adding new users.
6.3 Deleting User Settings
If a user's access needs to be revoked, their card or PIN can be removed from the system. The following video details the steps for deleting user settings.
7. Vedligeholdelse
- Rensning: Brug en blød, damp cloth to clean the keypad surface. Avoid abrasive cleaners or solvents.
- Inspektion: Kontrollér ledningerne med jævne mellemrum for tegn på skader eller løse forbindelser.
- Firmware: Tjek producentens webwebsted for tilgængelige firmwareopdateringer.
- Miljøbeskyttelse: The IP66 rating ensures protection against dust and strong jets of water. However, avoid prolonged submersion or exposure to extreme weather conditions beyond its rating.
8. Fejlfinding
- Tastatur reagerer ikke: Check power supply connections. Ensure the unit is receiving adequate power.
- Kortet genkendes ikke: Ensure the RFID card is correctly presented to the reader. Verify the card is properly registered in the system.
- PIN not working: Double-check the entered PIN. Ensure the PIN is correctly registered and the user mode allows PIN access.
- Døren låser ikke op: Verify the lock mechanism is functioning correctly. Check wiring between the keypad, power supply, and lock. Ensure the correct access method (card/PIN) is being used.
- System beeps continuously: Refer to the specific beep codes in the full manual for diagnostic information. This may indicate an error or an open circuit.
9. Garanti og support
This Sygonix SY-6421352 RFID Code Keypad comes with a 2-year warranty. For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the manufacturer's customer service. Keep your proof of purchase for warranty validation.
