VOLTCRAFT PSW 2000-12-G Ren Sinusbølge Inverter Brugsanvisning

1. Introduktion

The VOLTCRAFT PSW 2000-12-G Pure Sine Wave Inverter is designed to convert 12V DC power from a battery into stable 230V AC pure sine wave power. This type of output is essential for operating sensitive electronic devices that require a clean and consistent power supply, such as televisions, computers, and audio systems, without interference or damage. Its microcontroller-controlled electronics ensure reliable performance and protection under various conditions, including overload and short circuits.

2. Sikkerhedsinstruktioner

Læs og forstå alle sikkerhedsinstruktioner, før du bruger inverteren. Manglende overholdelse af disse instruktioner kan resultere i elektrisk stød, brand eller alvorlig personskade.

• Ventilation: Ensure the inverter is installed in a well-ventilated area. Do not block ventilation openings.
• Tørt miljø: Operate the inverter only in dry conditions. Avoid exposure to water, rain, or excessive humidity.
• Korrekt bindtage: Connect the inverter only to a 12V DC power source. Do not connect to a 24V or higher DC source.
• Brandfarlige materialer: Do not operate the inverter near flammable liquids, gases, or other combustible materials.
• Professionel installation: For permanent installations, it is recommended to consult a qualified electrician.
• Jording: Sørg for, at inverteren er korrekt jordforbundet i henhold til lokale elektriske forskrifter.
• Børn og kæledyr: Keep the inverter out of reach of children and pets.
• Demontering: Do not attempt to disassemble or modify the inverter. Refer all servicing to qualified personnel.

3. Pakkens indhold

Kontroller, at alle genstande er til stede og ubeskadigede ved udpakning.

• VOLTCRAFT PSW 2000-12-G Pure Sine Wave Inverter
• Instruktionsmanual
• DC Connection Cables (if included)

4. Produktet er slutview

The VOLTCRAFT PSW 2000-12-G inverter features a robust design with multiple output options and cooling mechanisms.

Figur 1: Foran-top view of the VOLTCRAFT PSW 2000-12-G inverter, showing the two AC outlets, USB port, and power button on the front panel.

Figur 2: Top view of the inverter, highlighting the VOLTCRAFT branding and model number on its blue casing.

Figur 3: Bagtil øverst view of the inverter, displaying the cooling fans and the robust DC input terminals (red for positive, black for negative).

Figur 4: Side view of the inverter, showing the heat sink fins for efficient thermal management.

5. Opsætning

Proper setup is crucial for safe and efficient operation of your inverter.

5.1. Beliggenhed

• Choose a cool, dry, and well-ventilated area.
• Undgå direkte sollys, varmekilder og fugt.
• Ensure sufficient clearance around the inverter for airflow, especially around the cooling fans.
• Mount the inverter securely on a stable, non-flammable surface.

5.2. DC-indgangsforbindelse

Connect the inverter to a 12V DC battery or power source.

1. Sørg for, at inverterens strømafbryder er i OFF-positionen.
2. Use appropriate gauge cables for the power rating (2000W) to minimize voltage-fald og forhindre overophedning.
3. Tilslut RØD positive (+) cable to the positive (+) terminal of the inverter and then to the positive (+) terminal of the battery.
4. Tilslut SORT negative (-) cable to the negative (-) terminal of the inverter and then to the negative (-) terminal of the battery.
5. Ensure all connections are tight and secure to prevent loose contacts and sparking.

5.3. Jordforbindelse

Connect the inverter's chassis ground terminal to a reliable earth ground. This is a critical safety measure.

6. Betjeningsvejledning

6.1. Tænder

1. After ensuring all DC connections are secure, switch the inverter's power button to the ON position.
2. The indicator light should illuminate, indicating the inverter is operational.
3. The cooling fan may activate briefly during startup or when under load.

6.2. Connecting AC Devices

1. Plug your 230V AC devices into the AC outlets on the front panel of the inverter.
2. Ensure the total power consumption of all connected devices does not exceed the inverter's continuous power rating (2000W).
3. For devices with high inrush current (e.g., motors, refrigerators), connect them one at a time.

6.3. USB -udgang

The inverter includes a USB port for charging compatible devices. Simply connect your USB device to the port.

6.4. Sluk

1. Disconnect all AC devices from the inverter outlets.
2. Switch the inverter's power button to the OFF position.
3. For long-term storage or maintenance, disconnect the DC input cables from the battery.

7. Vedligeholdelse

Regelmæssig vedligeholdelse sikrer optimal ydeevne og levetid for din inverter.

• Rensning: Rengør regelmæssigt inverterens yderside med en tør, blød klud. Sørg for, at ventilationsåbningerne er fri for støv og snavs. Brug ikke flydende rengøringsmidler.
• Forbindelser: Regularly check all DC input connections for tightness. Loose connections can cause overheating and power loss.
• Batterivedligeholdelse: Ensure your 12V DC battery is properly maintained and charged according to its manufacturer's instructions. A healthy battery is crucial for inverter performance.
• Opbevaring: Hvis inverteren skal opbevares i længere tid, skal den frakobles batteriet og opbevares et køligt og tørt sted.

8. Fejlfinding

Dette afsnit omhandler almindelige problemer, du kan støde på.

9. Specifikationer

10. Garanti og support

The VOLTCRAFT PSW 2000-12-G Pure Sine Wave Inverter comes with a minimum 2-year warranty from the date of purchase, covering manufacturing defects. For technical support, warranty claims, or service inquiries, please contact your retailer or the VOLTCRAFT customer service department. Please have your model number (PSW 2000-12-G) and proof of purchase available when contacting support.