OTOFIX TireGO 808 TPMS Programming Tool User Manual

1. Introduktion

This manual provides detailed instructions for the safe and effective operation of the OTOFIX TireGO 808 TPMS Programming Tool. The TireGO 808 is designed to assist with various Tire Pressure Monitoring System (TPMS) tasks, including sensor activation, programming, relearning, and diagnostics. Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage.

2. Sikkerhedsoplysninger

Always observe the following safety precautions when using the OTOFIX TireGO 808:

Brug ikke enheden i eksplosive atmosfærer, f.eks. i nærheden af brandfarlige væsker, gasser eller støv.
Keep the device dry. Do not expose it to rain or wet conditions.
Brug kun tilbehør specificeret af producenten.
Undgå at tabe enheden eller udsætte den for hårde stød.
Forsøg ikke at skille enheden ad eller ændre den. Reparationer bør kun udføres af autoriseret servicepersonale.
Ensure the vehicle's ignition is off before connecting or disconnecting the OBDII cable, unless instructed otherwise by the device for specific procedures.

3. Produktet er slutview

3.1 Pakkens indhold

The OTOFIX TireGO 808 package typically includes:

OTOFIX TireGO 808 Main Unit
USB kabel
Strømadapter
Hurtig guide
Bæretaske
Main OBDII Cable

3.2 Enhedsfunktioner

The OTOFIX TireGO 808 offers a range of features for comprehensive TPMS service:

TPMS Health Check
TPMS Programming (for OTOFIX MX-Sensors)
Sensor Relearn (OBD, Automatic, Stationary)
Sensor Activation (OE and universal TPMS sensors)
TPMS Diagnostics & Reset
Sensor Data Reading (ID, pressure, temperature, battery, position)
Quick Mode and Advanced Mode for varied user experience
Read/Clear TPMS Diagnostic Trouble Codes (DTCs)
Wi-Fi Updating for software and vehicle data
Key Fob Check (frequency and battery electricity)
TPMS ECU Unlock (for specific vehicle models like Toyota & Lexus)

OTOFIX TireGO 808 TPMS Programming Tool and accessories

Image 3.2.1: The OTOFIX TireGO 808 TPMS Programming Tool with its included accessories, including the main unit, OBDII cable, and carry case.

OTOFIX TireGO 808 displaying its one-stop TPMS tool capabilities

Image 3.2.2: The OTOFIX TireGO 808 device screen showing various TPMS functions and its capability to serve 315/433 MHz sensors.

4. Opsætning

4.1 Første opstart og opladning

Connect the device to a power source using the provided USB cable and power adapter. The device will automatically power on or can be powered on by pressing the power button. Ensure the device is sufficiently charged before initial use.

4.2 Wi-Fi-forbindelse og softwareopdateringer

To ensure optimal performance and access to the latest vehicle data, it is crucial to keep the device's software updated. The TireGO 808 supports Wi-Fi updates.

From the main menu, navigate to 'My Device' or 'Settings'.
Vælg 'Opdater via Wi-Fi'.
The device will scan for available Wi-Fi networks. Select your network and enter the password if prompted.
Once connected, select 'Latest Wi-Fi' or 'Update' to check for and download available software updates.
Keep the device connected to power during the update process.

OTOFIX TireGO 808 one-click WiFi updating process

Image 4.2.1: Illustration of the one-click Wi-Fi updating process for the OTOFIX TireGO 808, showing steps to connect to Wi-Fi and update software.

5. Betjeningsvejledning

The OTOFIX TireGO 808 offers two main operational modes: Hurtig tilstand for basic services and Avanceret tilstand for comprehensive TPMS functions.

5.1 Sensor Activation

This function is used to trigger all OE and universal TPMS sensors to read their information.

Select 'Activate Sensors' from the main menu.
Vælg køretøjets mærke, model og årgang.
Hold the tool near the tire valve stem.
Tryk på 'Trigger'-knappen på enheden.
The device will display sensor information such as ID, pressure, temperature, battery condition, and position.

OTOFIX TireGO 808 activating TPMS sensors and displaying data

Image 5.1.1: The OTOFIX TireGO 808 activating a TPMS sensor and displaying key data like sensor ID, tire pressure, temperature, battery, and position.

5.2 MX-sensorprogrammering

This function allows you to program OTOFIX MX-Sensors to replace malfunctioning sensors. The tool offers two programming options:

Automatisk oprettelse: Programs 1-16 MX-Sensors wirelessly within seconds.
Kopi via OBD: Copies existing sensor IDs from the vehicle's ECU via the OBDII port, eliminating the need for relearn in many cases.

Note: This tool is designed to program OTOFIX MX-Sensors only.

OTOFIX TireGO 808 demonstrating MX-Sensor programming methods

Image 5.2.1: Visual representation of the MX-Sensor programming options: Auto Create and Copy by OBD, with the tool connected to a vehicle.

5.3 Sensor Relearn

After replacing TPMS sensors, a relearn procedure is necessary to link the new sensor IDs to the vehicle's TPMS ECU. The TireGO 808 supports three relearn methods:

OBD-genindlæring: Directly writes TPMS sensor IDs to the vehicle's TPMS module via the OBDII port.
Automatisk genindlæring: Requires driving the vehicle for a specified period (e.g., 10 minutes above 19 mph) to complete the relearn process.
Stationær genindlæring: Requires placing the vehicle in 'Learn Mode' and following on-screen instructions to match sensors with the car.

Detailed step-by-step guides are provided on the device screen for each method.

OTOFIX TireGO 808 showing three TPMS sensor relearn methods

Image 5.3.1: The OTOFIX TireGO 808 illustrating the three easy relearn methods: OBD Relearn, Automatic Relearn, and Stationary Relearn.

5.4 TPMS-diagnostik

The diagnostic function allows for a comprehensive check of the TPMS system.

Connect the device to the vehicle's OBDII port.
Select 'TPMS Diagnostics' from the menu.
The tool will scan the entire TPMS system.
You can then read and clear TPMS Diagnostic Trouble Codes (DTCs) to identify and resolve issues.
Review data and print reports for deeper analysis if needed.

OTOFIX TireGO 808 performing TPMS diagnostics on a vehicle

Image 5.4.1: The OTOFIX TireGO 808 connected to a vehicle, performing TPMS diagnostics and displaying a low tire pressure warning on the dashboard.

5.5 Tire Type/Pressure Selection

If the TPMS warning light persists due to system configuration faults, this function allows you to set the correct tire type and pressure values.

Navigate to the 'Tire Type/Pressure Selection' option.
Follow the on-screen prompts to read the current tire type/pressure.
Select and save the correct tire type and pressure settings for your vehicle.
Trigger the sensors to write the new settings to the vehicle's ECU.

Note: This function primarily serves American-made vehicles.

OTOFIX TireGO 808 demonstrating tire type and pressure selection

Image 5.5.1: The OTOFIX TireGO 808 screen showing the steps for selecting and saving tire type and pressure settings.

5.6 Yderligere funktioner

The TireGO 808 includes other useful functions:

Nøglebrikketest: Checks key frequency and battery electricity.
TPMS ECU Unlock: For specific Toyota and Lexus models.
Sensor Data Printing: Allows printing of sensor data via a PC connection.
History Test Record: Stores previous test results for review.

OTOFIX TireGO 808 additional features like key fob test and data printing

Billede 5.6.1: Overview of additional features of the OTOFIX TireGO 808, including Key Fob Test, TPMS ECU Unlock, Sensor Data Printing, and History Test Record.

6. Vedligeholdelse

6.1 Softwareopdateringer

Regularly update the device software via Wi-Fi to ensure compatibility with new vehicle models and TPMS sensors, and to receive performance enhancements. Refer to Section 4.2 for detailed update instructions.

6.2 Rengøring

Rengør enheden med en blød, damp cloth. Do not use abrasive cleaners or solvents. Keep the screen free of dust and debris for optimal visibility.

6.3 Opbevaring

Store the device in its protective carry case when not in use. Keep it in a dry environment, away from extreme temperatures and direct sunlight.

7. Fejlfinding

This section addresses common issues you might encounter with the OTOFIX TireGO 808.

Spørgsmål	Mulig årsag	Løsning
Enheden tænder ikke	Low battery; Power button not pressed correctly; Device malfunction	Charge the device; Press and hold the power button; Contact support if issue persists.
Wi-Fi update fails	Poor Wi-Fi signal; Incorrect password; Server issue	Ensure strong Wi-Fi signal; Verify password; Try again later or contact support.
Kan ikke aktivere sensoren	Tool not close enough to sensor; Sensor faulty; Incorrect vehicle selection	Hold tool within 4 inches of valve stem; Check sensor condition; Verify vehicle make/model/year.
Sensor relearn fails	Incorrect relearn procedure; Vehicle not in learn mode; Sensor not programmed	Follow on-screen instructions precisely; Ensure vehicle is in learn mode; Confirm sensors are correctly programmed.
Enheden fryser eller reagerer ikke	Softwarefejl; Lavt batteri	Perform a hard reset (refer to quick guide); Charge the device; Update software.

If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact OTOFIX customer support.

8. Specifikationer

Technical specifications for the OTOFIX TireGO 808:

Model: OTOFIX TSGO 808
Varens vægt: 3.99 pund
Produktdimensioner: 5.12 x 5.12 x 8.66 tommer
Vise: 2.8 tommer, 320x240 opløsning
Batteri: 3.7V 3200mAh (1 AA battery included)
Forbindelse: Wi-Fi, USB
TPMS Frequencies: 315MHz / 433MHz
Producentens varenummer: OTOFIX TSGO 808
UPC: 850052860462

OTOFIX TireGO 808 highlighting quality, updates, and specifications

Image 8.1.1: The OTOFIX TireGO 808 showcasing its hardware specifications, lifetime updating, and customer service commitment.

9. Garanti og support

OTOFIX is committed to providing reliable products and customer satisfaction.

Livstids gratis opdateringer: The OTOFIX TireGO 808 includes lifetime free software updates to ensure the tool remains current with new vehicle models and TPMS technologies.
2-årig forpligtelse: Specific warranty details are provided with the product documentation. Please refer to the warranty card for terms and conditions.
Onlinesvar: OTOFIX offers 24/7 online support for technical assistance and inquiries.

For further assistance, please visit the official OTOFIX website or contact their customer support channels as indicated in your product packaging or quick guide.

	OTOFIX D1 Pro Benutzerhåndbog: Umfassende Fahrzeugdiagnose og Wartung Dette OTOFIX D1 Pro-brugerhåndbog fra Autel Intelligent Technology Corp., Ltd. bietet detaljerede vejledninger til Fahrzeugdiagnose, Wartung og Fehlerbehebung. Erfahren Sie mehr über die Funktionen des D1 Pro, V1 og BT1 Lite.
	OTOFIX D1/D1 Lite hurtigreferenceguide - Bildiagnoseværktøj Kortfattet hurtigreferencevejledning til OTOFIX D1 og D1 Lite bildiagnoseværktøjerne. Indeholder funktionelle beskrivelser af diagnosetabletten og OTOFIX V1 VCI, trinvise instruktioner til at komme i gang og FCC-overholdelsesoplysninger. Vigtig for brugere af OTOFIX-diagnoseudstyr.
	OTOFIX D1 Plus hurtig referencevejledning Lynvejledning til OTOFIX D1 Plus diagnoseværktøjet og OTOFIX V1 VCI, der dækker funktionsbeskrivelser, LED-indikatorer og introduktionsinstruktioner til køretøjsdiagnostik.
	OTOFIX D1 / D1 Lite hurtig referencevejledning En hurtig referenceguide til OTOFIX D1 og D1 Lite diagnoseværktøjerne fra AUTEL, med detaljerede funktionsbeskrivelser, LED-indikatorer og instruktionsvejledning til køretøjsdiagnose.
	OTOFIX D1 Pro hurtig referencevejledning Lynvejledning til OTOFIX D1 Pro diagnoseværktøjet og OTOFIX V1 VCI. Indeholder vigtige oplysninger om enhedens funktioner, opsætning, LED-indikatorer og hvordan man kommer i gang med køretøjsdiagnose.
	OTOFIX D1 Lite pakkeliste og indhold Detaljeret pakkeliste til OTOFIX D1 Lite diagnoseværktøjet, inklusive hovedenhed, VCI, USB-kabel, strømadapter, USB til Ethernet-adapter, bæretaske og hurtigreferencevejledning.