Indledning
This manual provides essential instructions for the safe and effective use of your GE ConstantON 300 High Density Icicle-Style Lights. Please read this manual thoroughly before installation and retain it for future reference.
Image: The GE ConstantON 300 High Density Icicle-Style Lights, featuring clear bulbs on a white wire, designed for both indoor and outdoor decorative use.
Vigtige sikkerhedsoplysninger
WARNING: To reduce the risk of fire and electric shock, observe the following:
- This product is intended for decorative use only and is not a toy. Keep out of reach of children.
- Do not connect this lighting string to another manufacturer's product.
- Udskift udbrændt l for at mindske risikoen for overophedningamps (bulbs) promptly.
- Ensure the fused plug is fully inserted into the outlet. If it does not fit, contact a qualified electrician. Do not modify the plug.
- This product is designed for both indoor and outdoor use. When used outdoors, ensure connections are protected from moisture.
- Always unplug the product before performing any maintenance or bulb replacement.
Image: Close-up of the product's fused plug and safety warning label, indicating UL certification and electrical specifications.
Pakkens indhold
- 1 x GE ConstantON 300 High Density Icicle-Style Light Set (Model 61646LO)
- Udskiftning af pærer
- Udskiftningssikringer
Image: The retail packaging for the GE ConstantON 300 High Density Icicle-Style Lights, highlighting key features like "ConstantON" and "Connects up to 3 sets".
Opsætningsinstruktioner
- Pakker ud: Carefully remove the light set from its packaging. Untangle the strands gently to avoid damage.
- Placering:
- For Indendørs brug: Position the lights in your desired location, ensuring they are not near heat sources or flammable materials.
- For Udendørs brug: Select a location that provides adequate support for the lights. Ensure all connections are secure and protected from direct exposure to water. This product is weather resistant.
- Tilslutning af flere sæt: This light set is designed to connect with up to 3 identical sets (Model 61646LO). To connect, align the end connector plug of one set with the fused plug of the next set and push firmly. Do not exceed the maximum recommended number of connected sets to prevent overloading.
- Strømtilslutning: Once the lights are positioned and any additional sets are connected, insert the fused plug into a standard 120V AC electrical outlet.
Image: GE Icicle Lights draped along an outdoor structure, demonstrating typical installation for decorative lighting.
Betjeningsvejledning
The GE ConstantON Icicle-Style Lights feature ConstantON technology, which ensures that the entire string remains lit even if a single bulb burns out or becomes loose. This feature enhances reliability and reduces the need for immediate troubleshooting.
- Tænd: Plug the light set into a live 120V AC outlet. The lights should illuminate immediately.
- Sluk: Unplug the light set from the electrical outlet.
Opretholdelse
Udskiftning af pære
While ConstantON technology keeps the string lit, replacing burned-out bulbs is recommended to maintain optimal brightness and prevent potential overheating. Use only replacement bulbs provided by Nicolas Holiday or specified for this model.
- Unplug the light set from the power source.
- Carefully pull the burned-out bulb straight out from its socket.
- Sæt en ny pære i den tomme fatning, og sørg for, at den sidder helt fast.
- Plug the light set back in to test.
Udskiftning af sikring
The fused plug contains two fuses designed to protect the light set from electrical overloads. If the entire string fails to light, check the fuses.
- Unplug the light set from the power source.
- Slide open the fuse access cover on the side of the plug.
- Carefully remove the old fuses.
- Insert two new 3-amp fuses (provided) into the fuse holders.
- Slide the fuse access cover back into place.
- Plug the light set back in to test.
Opbevaring
When not in use, store the light set in a cool, dry place, away from direct sunlight and extreme temperatures. Coil the lights neatly to prevent tangling and damage to the wiring.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lysene tænder ikke. | Ingen strøm til stikkontakten. | Check the wall outlet with another appliance. Check circuit breaker. |
| Lysene tænder ikke. | Sprunget sikring i stikket. | Replace the fuses as described in the Maintenance section. |
| Lysene tænder ikke. | Løs forbindelse. | Ensure the plug is fully inserted into the outlet and any connected sets are securely joined. |
| Some bulbs are out, but the rest of the string is lit. | Burned-out or loose bulb(s). | This is normal due to ConstantON technology. Replace the individual bulbs as described in the Maintenance section for full brightness. |
Specifikationer
| Modelnummer | 61646LO |
| Lystæller | 300 klare glødelamper |
| Oplyst længde | 8.8 fod (2.68 meter) |
| Ledningslængde | 3 tommer |
| Pæreafstand | 2.5 tommer |
| Strandafstand | 2 tommer |
| Endestikstik | 3 tommer |
| Tråd farve | Hvid |
| Strømkilde | Corded Electric (120V, 60Hz, 0.17A, 20.4W) |
| Indendørs/Udendørs brug | Ja |
| Speciel funktion | ConstantON Technology, Weather Resistant |
| Maximum Connectable Sets | Up to 3 sets (Model 61646LO) |
| UPC | 803993616469 |
Image: The back of the product packaging, displaying detailed specifications and warranty information for the GE ConstantON Icicle Lights.
Garanti og support
2-års begrænset garanti
This product is intended for residential seasonal use only. This product is guaranteed to be free from defects in material and workmanship for a period of two (2) years from the date of purchase. Please retain your proof of purchase.
For complete warranty details and exclusions, please refer to the information provided inside the product packaging or contact customer service.
Kundeservice
For assistance or warranty claims, please contact Nicolas Holiday Customer Service. Providing the original UPC code (803993616469) will help expedite your request.
- Webwebsted: www.geholidaylighting.com
- Gratis: 1-877-398-7337
Please allow four (4) to six (6) weeks for processing warranty claims.
