xTool F1 Lite lasergravør brugermanual

1. Introduktion

The xTool F1 Lite is a portable and high-speed laser engraving machine designed for precision and versatility. It features a 10W diode laser, enabling rapid engraving and cutting on a wide range of materials. Its compact design and user-friendly interface make it suitable for both beginners and experienced users.

xTool F1 Lite Laser Engraver with a tumbler being engraved

The xTool F1 Lite Laser Engraver in operation, demonstrating its ability to engrave on cylindrical objects like tumblers.

Infographic highlighting key features of xTool F1 Lite

An infographic detailing the xTool F1 Lite's key features, including its 4000mm/s speed, Ultra HD detail, portability, and support for over 300 materials.

2. Opsætning og første brug

The xTool F1 Lite is designed for quick and easy setup. It comes pre-assembled, allowing you to begin creating almost immediately after unboxing. Follow these general steps for initial setup:

Unboxing: Fjern forsigtigt alle komponenter fra emballagen.
Placering: Placer gravøren på en stabil, flad overflade i et godt ventileret område.
Strømtilslutning: Connect the power adapter to the engraver and then to a power outlet.
Software installation: Download and install the XCS software on your computer or mobile device. The software is intuitive and widely used.
Materiale placering: Place your desired material on the engraving platform.
Autofokus og Live Preview: Utilize the auto-focus feature and live preview in the XCS software to ensure precise positioning and optimal engraving results, minimizing material waste.

Three-step customization process using xTool F1 Lite

The simplified customization process: Design patterns on a mobile device, preview the position on the engraver, and achieve the final engraved result.

3. Betjeningsvejledning

The xTool F1 Lite offers lightning-fast engraving speeds of 4000mm/s, allowing for quick completion of projects. Its Ultra Galvo system ensures high precision, capturing intricate details with accuracy.

Supported Materials and Engraving Capabilities

The 10W diode laser of the F1 Lite is capable of engraving and cutting a wide variety of materials. Note that the F1 Lite features a 10W diode laser only and does not support direct engraving on all metals or rubber, unlike models with an infrared laser.

Gravering: Wood, Leather, Acrylic, Glass, Rock (Slate), Paper, Cork, Stainless Steel, Coated Metals.
Skæring: Up to 8mm Basswood (multiple cuts), Up to 6mm dark opaque Acrylic (multiple cuts), Paper, Leather.

xTool F1 Lite engraving various daily items

The xTool F1 Lite demonstrating its capability to engrave on over 300 different materials, including paper, wood, leather, and more.

Close-up of an HD engraved image of a woman and dog

En detaljeret view of an engraved image, showcasing the high-definition resolution and precision achievable with the xTool F1 Lite.

Officielle produktvideoer

This video demonstrates how quickly the xTool F1 Lite can engrave a unique design onto a cup, highlighting its speed and efficiency for personalized items.

Watch this video to see the xTool F1 Lite in action, creating a special gift box with custom engravings, showcasing its precision for detailed projects.

4. Vedligeholdelse

Regular maintenance ensures the longevity and optimal performance of your xTool F1 Lite. Always power off and unplug the device before performing any maintenance.

Rengøring af linsen: Rengør laserlinsen med jævne mellemrum med en blød, fnugfri klud og linserengøringsmiddel for at opretholde graveringskvaliteten.
Cleaning the Engraving Platform: Remove debris and dust from the engraving platform after each use to prevent buildup that could affect material placement or engraving results.
Ventilationssystem: Ensure the built-in fan and ventilation openings are clear of obstructions to maintain proper airflow and smoke extraction.
Generel rengøring: Tør maskinens yderside af med en tør eller let fugtig klud.amp klæde. Undgå at bruge skrappe kemikalier.

xTool F1 Lite with fully enclosed safety features

The xTool F1 Lite features a fully enclosed design for enhanced safety, including laser light-proof housing and a smoke-free built-in fan.

5. Fejlfinding

If you encounter issues with your xTool F1 Lite, refer to the following common troubleshooting tips. For more complex problems, please contact customer support.

Gravøren tænder ikke: Check the power cable connection to both the engraver and the power outlet. Ensure the power switch is in the 'On' position.
Problemer med softwareforbindelse: Verify that the engraver is properly connected to your computer or mobile device via USB or Bluetooth. Restart the XCS software and the engraver.
Dårlig graveringskvalitet: Ensure the material is correctly focused. Clean the laser lens. Adjust engraving parameters (power, speed, passes) in the XCS software according to the material type.
Laser affyres ikke: Check if the safety cover is properly closed. Ensure the emergency stop button is not pressed.
Usædvanlige lyde: Power off the machine immediately and inspect for any obstructions or loose parts. Do not operate if unusual noises persist.

6. Specifikationer

Feature	Detalje
Mærke	xTool
Modelnummer	MXF-K001-B10
Laser type	10W diodelaser
Graveringshastighed	4000 mm/s
Motion Precision	0.00199 mm
Gentag præcision	0.000248
Varens vægt	17.01 pund (ca. 7.7 kg)
Pakkedimensioner	16 x 16 x 12.5 tommer
Oprindelsesland	Kina
Fabrikant	Makeblock Co.,Ltd
Første ledige dato	9. februar 2025

7. Garantioplysninger

The xTool F1 Lite Laser Engraver comes with a 1 års begrænset garanti from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, refer to the official xTool webwebsted eller kontakt kundesupport.

8. Kundesupport

For any questions, technical assistance, or support needs, xTool provides multi-channel service options:

E-mail support: Reach out via email for detailed inquiries.
Live chat: Access live chat support for immediate assistance.
Telefonsupport: Contact our technical service team by phone.
Facebook-gruppe: Join the official xTool Facebook group for community support, tips, and discussions.

Our technical service team is dedicated to providing prompt and helpful responses to ensure a smooth experience with your xTool F1 Lite.

	xTool F1 Brugermanual: Guide til dobbelt lasergravering og -skærer Omfattende brugermanual til xTool F1, en 2-i-1 dobbelt lasergravør og -skærer. Lær om dens funktioner, betjening, sikkerhedsretningslinjer og vedligeholdelse.
	XTool F1 Ultra hurtigstartguide: Opsætning, betjening og vedligeholdelse Omfattende hurtigstartguide til XTool F1 Ultra, en kraftfuld dobbelt lasergraverings- og skæremaskine. Dækker udpakning, opsætning, betjening, softwareinstallation og vedligeholdelse for optimal ydeevne.
	xTool P2 FAQs: Din guide til den smarte desktop-laserskærer Ofte stillede spørgsmål om xTool P2 laserskærer og gravør, der dækker kompatibilitet, betjening, funktioner, materialer og vedligeholdelse.
	Guide til betjening af xTool F1 med xTool Creative Space (XCS) Lær, hvordan du bruger xTool Creative Space (XCS)-softwaren til at betjene xTool F1 dobbeltlasergravøren. Denne vejledning dækker installation, tilslutning, materialeopsætning, design, parameterindstillinger, forberedelseviewog forarbejdning.
	XTOOL Air Assist Set brugervejledning: Installation og betjening Omfattende brugervejledning til XTOOL Air Assist-sættet, med detaljer om installation, specifikationer og ofte stillede spørgsmål for forbedret laserskæring og graveringsydelse med maskiner som XTOOL D1.
	XTOOL P3 Lynstartguide: Opsætning, betjening og funktioner En omfattende hurtigstartguide til XTOOL P3 lasergravøren og -skæreren, der beskriver opsætningsprocedurer, identifikation af dele, forberedelsestrin, softwaretilslutning og forklaringer af indikatorer og kontroller.

xTool MXF-K001-B10