1. Introduktion
This manual provides detailed instructions for the proper use and maintenance of your MiBOXER C4 RGB+CCT Remote. This 2.4GHz wireless remote control is designed to manage compatible MiBOXER RGB+CCT lighting products, offering precise control over brightness, color temperature, and RGB colors across up to four independent zones.
Please read this manual thoroughly before operating the device to ensure safe and efficient use.
2. Sikkerhedsoplysninger
- Do not expose the remote to moisture or extreme temperatures.
- Opbevares utilgængeligt for børn.
- Use only the specified battery type (2 x AAA batteries, not included).
- Bortskaf brugte batterier ansvarligt i henhold til lokale regler.
- Do not attempt to disassemble or modify the remote control. This will void the warranty.
3. Pakkens indhold
Bekræft at alle varer er til stede i pakken:
- MiBOXER C4 RGB+CCT Remote Control
- Brugervejledning (dette dokument)
Image: The MiBOXER C4 remote control shown alongside its retail packaging and a small instruction leaflet.
4. Produktet er slutview
Familiarize yourself with the buttons and indicators on your C4 remote control.
Image: A diagram illustrating the MiBOXER C4 remote control with labels for its indicator light, brightness/CCT/RGB touch strip, ON button (Link/Unlink), and OFF button.
- Indikatorlys: Viser den aktuelle driftstilstand.
- Rød: Lysstyrketilstand
- Gul: CCT (Color Temperature) Mode
- Grøn: RGB-tilstand
- Brightness/CCT/RGB Touch Strip: Used to adjust brightness, color temperature, or RGB color depending on the active mode.
- ON Button (Link/Unlink):
- Short Press: Turns the linked lights ON.
- Continuous Short Press: Cycles through dimming modes (Brightness → CCT → RGB).
- Press and Hold (within 3 seconds of powering on a light): Links the remote to the light.
- OFF knap: Turns the linked lights OFF.
Note: If there is no operation for 3 seconds, the remote automatically returns to Brightness Mode.
5. Opsætning
5.1 Batteriinstallation
- Find batterirummet på bagsiden af fjernbetjeningen.
- Åbn batteridækslet.
- Isæt to (2) AAA-batterier, og sørg for at polerne vender korrekt (+/-).
- Luk batteridækslet forsvarligt.
5.2 Linking the Remote to Lights
To control your MiBOXER lights, the C4 remote must be linked to them. This process typically involves pairing the remote with the light fixture within a short timeframe after the light is powered on.
- Ensure the light fixture you wish to link is powered OFF.
- Power ON the light fixture.
- Within 3 seconds of powering on the light, press and hold the ON button on the C4 remote.
- The light should flash several times, indicating successful linking.
- If linking fails, power OFF the light, wait 10 seconds, and repeat steps 2-4.
Note: For multi-zone control, repeat the linking process for each zone or group of lights you wish to assign to a specific zone on the remote (if your light supports zone assignment).
6. Betjeningsvejledning
6.1 Tænd/sluk
- To turn lights ON: Short press the ON knap.
- To turn lights OFF: Short press the SLUKKET knap.
6.2 Switching Modes (Brightness, CCT, RGB)
The C4 remote operates in three main modes, indicated by the color of the indicator light:
- To cycle through modes: Continuously short press the ON button. The sequence is Brightness (Red) → CCT (Yellow) → RGB (Green).
- The remote will automatically revert to Brightness Mode if no operation is performed for 3 seconds.
6.3 Justering af lysstyrke
When the indicator light is Rød (Brightness Mode):
- Slide your finger along the Brightness/CCT/RGB Touch Strip to increase or decrease the light intensity.
6.4 Adjusting Color Temperature (CCT)
When the indicator light is Gul (CCT Mode):
- Slide your finger along the Brightness/CCT/RGB Touch Strip to adjust the color temperature from warm white to cool white.
6.5 Adjusting RGB Color
When the indicator light is Grøn (RGB Mode):
- Slide your finger along the Brightness/CCT/RGB Touch Strip to select your desired RGB color.
7. Vedligeholdelse
- Rensning: Use a soft, dry cloth to clean the surface of the remote. Do not use abrasive cleaners or solvents.
- Udskiftning af batteri: Replace batteries when the remote's response becomes sluggish or the indicator light dims. Always replace both AAA batteries simultaneously.
- Opbevaring: Hvis fjernbetjeningen opbevares i længere tid, skal batterierne tages ud for at forhindre lækage.
8. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Fjernbetjeningen svarer ikke. | Lave eller døde batterier. Remote not linked to lights. Uden for rækkevidde. | Udskift batterierne. Re-link the remote to the lights (see Section 5.2). Move closer to the lights (within 30m). |
| Lights not changing color/brightness. | Forkert tilstand valgt. Light fixture not compatible. | Cycle through modes using the ON button until the correct indicator light color appears (Red for Brightness, Yellow for CCT, Green for RGB). Ensure your light fixture is a MiBOXER RGB+CCT compatible product. |
| Linking fails. | Timing issue during linking. Light already linked to another remote/zone. | Ensure you press and hold the ON button within 3 seconds of powering on the light. Try again. If the light was previously linked, you may need to unlink it first (refer to your light fixture's manual for unlinking procedures, as this remote does not have a dedicated unlink function). |
9. Specifikationer
| Model | C4 |
| Trådløs frekvens | 2.4GHz RF |
| Kontrol afstand | Op til 30 meter (98 fod) |
| Zones Supported | 4 Zones (with compatible MiBOXER products) |
| Strømforsyning | 2 x AAA batterier (medfølger ikke) |
| Kompatibilitet | MiBOXER RGB+CCT controllers, gateways, and lighting products |
| Dimensioner | 140 mm x 40 mm x 7 mm (ca. 5.51 x 1.57 x 0.28 tommer) |
| Vægt | Approx. 2.08 ounces (without batteries) |
| Varemodelnummer | febec019-685b-4f66-b1e2-c25abc047cee |
Image: A technical drawing showing the dimensions of the MiBOXER C4 remote control in millimeters, along with its packaging dimensions.
10. Garanti og support
MiBOXER products are designed for reliability and performance. For specific warranty details, please refer to the warranty card included with your product or visit the official MiBOXER webwebstedet. Behold din købskvittering som købsbevis.
For technical support, troubleshooting assistance, or inquiries about compatible products, please contact MiBOXER customer service through their official channels. Contact information can typically be found on the product packaging or the MiBOXER webwebsted.
Du kan besøge MiBOXER-butik på Amazon for more information and product listings.
