Indledning
Thank you for choosing the ThinkRider Shock Pump MP9. This high-pressure pump is specifically designed for precise inflation of mountain bike front forks, rear shocks, and seat tubes. Featuring a durable aluminum alloy construction, an easy-to-read gauge, and versatile valve compatibility, the MP9 ensures optimal suspension performance for a smoother ride. Please read this manual thoroughly before use to ensure proper operation and maintenance.
Nøglefunktioner
- Specialiseret design: Optimized for forks, shocks, and seat tubes.
- Dobbelt ventilkompatibilitet: Easily switch between Presta and Schrader valves for a tight, leak-free seal.
- High Pressure & Precision Gauge: Max 350PSI/24Bar with an easy-to-read 1.5-inch industrial gauge for accurate pressure readings.
- Fine-Tuning Exhaust Button: Allows riders to precisely set air shock or fork pressure.
- Ergonomic T-Handle: Designed for comfortable grip and effortless pumping, collapsible for easy storage.
- Holdbar konstruktion: Lightweight aluminum alloy barrel for longevity.
- Bærbart design: Compact size (Shrink length 11 inches, stretch length 15.7 inches, Weight 0.17kg) for on-the-go adjustments.
Billede: Overview of the ThinkRider Shock Pump highlighting its features including the gauge, Schrader compatibility, 350 PSI maximum pressure, and suitability for mountain bikes.
Billede: Detaljeret view of the shock pump's 1.5-inch industrial pressure gauge, displaying both PSI and Bar measurements for accurate inflation.
Image: The ergonomic, pinch-free T-handle of the pump, designed for comfortable and effortless use, and shown in its collapsible state for easy storage.
Image: A close-up of the CNC alloy barrel, highlighting its full aluminum alloy construction for lightweight durability.
Opsætning
- Forbered ventilen: Locate the air valve on your bicycle's front fork, rear shock, or seat tube. Remove any protective caps.
- Tilslut pumpen: The ThinkRider Shock Pump is compatible with both Presta and Schrader valves. Firmly screw the pump's connector onto the valve stem until it is securely attached and no air is leaking.
- Check Initial Pressure: Once connected, the gauge will display the current air pressure in your suspension component.
Video: Demonstration of how to use a bike shock pump on a bicycle fork, including removing the valve cap, attaching the pump, and checking pressure. This video is provided by Bucklos-Sellect.
Betjeningsvejledning
- Oppustning: Hold the pump firmly and extend the T-handle. Begin pumping by pushing and pulling the handle. Observe the pressure gauge as you pump.
- Monitortryk: Continue pumping until the desired PSI (or Bar) is reached. Refer to your bicycle manufacturer's recommendations for optimal pressure settings based on your weight and riding style.
- Fine-Tuning (Bleed Button): If you over-inflate or need to make small adjustments, gently press the red bleed button located near the gauge. This will release small amounts of air, allowing for precise pressure setting.
- Afmontering af pumpen: Once the desired pressure is achieved, unscrew the pump connector from the valve stem. The anti-leak design minimizes air loss during detachment. Reinstall the protective valve cap.
Video: A demonstration of the features and operation of a shock pump, including its precision gauge, anti-leak valve, ergonomic T-handle, and fine-tune bleed button. This video is provided by Pro Bike Tool.
Opretholdelse
To ensure the longevity and optimal performance of your ThinkRider Shock Pump, follow these simple maintenance guidelines:
- Rensning: Wipe the pump clean with a soft, dry cloth after each use to remove dirt and debris. Avoid using harsh chemicals or abrasive materials.
- Opbevaring: Store the pump in a dry, cool place away from direct sunlight and extreme temperatures. Collapse the T-handle for compact storage.
- Inspektion: Periodically check the hose and connectors for any signs of wear or damage. Ensure the valve cap is always replaced on your bike's suspension to prevent dirt ingress.
Fejlfinding
- Air Leakage During Pumping: Ensure the pump connector is fully and securely threaded onto the valve stem. Check the valve core on your suspension for any damage or looseness.
- Inaccurate Gauge Reading: Ensure the pump is properly connected. If readings are consistently off, the gauge may need calibration or replacement.
- Difficulty Pumping: High-pressure pumps require more effort as pressure increases. Ensure the pump is clean and free of obstructions. If resistance is unusually high at low pressures, check for internal issues.
Specifikationer
| Feature | Specifikation |
|---|---|
| Mærke | ThinkRider |
| Modelnavn | MP9 |
| Materiale | Aluminium |
| Farve | Sort |
| Varens vægt | 6.08 ounce (0.17 kg) |
| Product Dimensions (Shrink) | 3.15 cm L x 1.57 cm B x 11 cm H |
| Product Dimensions (Stretch) | 15.7"H |
| Maksimalt tryk | 350 PSI / 24 Bars |
| Driftstilstand | Manuel |
| Slange længde | 5.3 Inches (26.5 cm extended) |
| Inkluderede komponenter | Pumpe *1 |
Image: Detailed specifications and dimensions of the ThinkRider Shock Pump, including its length, weight, material, and maximum pressure.
Garanti og support
The ThinkRider Shock Pump MP9 comes with a 1 års garanti from the date of purchase. This warranty covers manufacturing defects and material flaws under normal use. For warranty claims, technical support, or any inquiries, please contact ThinkRider customer service through the retailer where the product was purchased or visit the official ThinkRider webwebsted for kontaktoplysninger.
Gem venligst din købsbevis for at validere garantien.
