1. Introduktion
This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your FLEXISPOT E3 Dual Motor Electric Standing Desk. Please read this manual thoroughly before installation and use to ensure proper function and safety.
2. Vigtige sikkerhedsoplysninger
To prevent injury and ensure optimal performance, please adhere to the following safety guidelines:
- Sørg altid for, at skrivebordet er korrekt samlet og stabilt inden brug.
- Overskrid ikke den maksimale vægtgrænse på 220 lbs (100 kg).
- Be cautious when adjusting the desk height to avoid injury from pinching or crushing. Ensure no objects or body parts are in the path of the moving desk.
- Hold børn og kæledyr væk fra skrivebordet under drift.
- Du må ikke sidde eller stå på skrivebordet.
- Brug kun den medfølgende strømadapter og komponenter.
- If any unusual noise or movement occurs, immediately stop operation and unplug the desk.
3. Opsætning og montering
The FLEXISPOT E3 desk requires assembly. It typically arrives in two separate packages. While the lower frame assembly is straightforward, the desktop may require drilling approximately 20 holes for secure attachment. It is recommended to have two people for assembly due to the weight of the components.
3.1. Pakkens indhold
Verify that all components are present before beginning assembly. Refer to the included assembly guide for a complete list of parts.
3.2. Monteringstrin
- Pak alle komponenter ud, og læg dem på en ren, blød overflade for at forhindre ridser.
- Assemble the desk frame according to the detailed instructions provided in the separate assembly guide.
- Attach the desktop to the assembled frame. Ensure proper alignment before securing with screws. Note that pre-drilled holes may not be present on the desktop, requiring careful drilling.
- Connect the control panel and power cables as instructed.
- Place the desk in its desired location, ensuring it is level and stable.
4. Betjeningsvejledning
The FLEXISPOT E3 desk features a dual-motor system for smooth and quiet height adjustments, controlled by a programmable panel.
4.1. Kontrolpanel overview
The control panel allows you to raise or lower the desk and save preferred height positions.
- Up/Down Arrows (↑ / ↓): Press and hold to continuously adjust the desk height. Release to stop at the desired level.
- Hukommelsesforudindstillinger (1, 2, 3, 4): These buttons allow you to save and recall up to four custom height settings.
4.2. Indstilling af hukommelsesforudindstillinger
- Juster skrivebordet til den ønskede højde ved hjælp af pilene op/ned.
- Press the 'M' or 'Set' button (if available, or follow specific instructions for your panel) followed by one of the number buttons (1, 2, 3, or 4). The display may flash or beep to confirm the setting is saved.
- To recall a saved height, simply press the corresponding number button. The desk will automatically move to that preset height.
4.3. Dual Motor Operation
The E3 desk is equipped with dual motors, providing seamless and silent operation (under 50 dB). This design allows for a higher weight capacity and smoother transitions between sitting and standing positions.
4.4. Vægtkapacitet
The desk is engineered to support up to 220 lbs (100 kg), providing a sturdy and reliable workstation for various tasks and equipment.
4.5. Antikollisionssystem
The desk is equipped with an anti-collision system that detects resistance during height adjustment. If an obstacle is encountered, the desk will automatically stop and reverse slightly to prevent damage or injury.
5. Vedligeholdelse
Regelmæssig vedligeholdelse sikrer dit hæve- og sænkebords lange levetid og optimal ydeevne.
- Rensning: Tør skrivebordet og rammen af med en blød kludamp klud. Undgå skrappe kemikalier eller slibende rengøringsmidler, der kan beskadige overfladen.
- Kabelstyring: Kontroller og organiser kabler med jævne mellemrum for at forhindre sammenfiltringer og sikre, at de ikke forstyrrer skrivebordets bevægelse.
- Fastgørelsesmidler: Kontrollér lejlighedsvis alle skruer og bolte for at sikre, at de er spændte. Efterspænd om nødvendigt.
- Motorinspektion: Ensure the motor and electrical connections are free from dust and debris. Do not attempt to open the motor housing.
6. Fejlfinding
If you encounter issues with your FLEXISPOT E3 desk, refer to the following common problems and solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Skrivebordet bevæger sig ikke eller reagerer ikke på betjeningselementer. | Power cable disconnected, circuit breaker tripped, control panel malfunction. | Check all cable connections. Ensure the power outlet is functional. Try unplugging and replugging the desk after 30 seconds. |
| Skrivebordet bevæger sig ujævnt eller laver usædvanlige lyde. | Uneven load, loose fasteners, obstruction. | Ensure weight is evenly distributed. Check and tighten all assembly fasteners. Remove any obstructions. |
| Error codes displayed (e.g., ASR/E20). | Motor overload, sensor issue, or internal fault. | Unplug the desk for at least 10 minutes, then plug it back in. If the error persists, contact customer support. Avoid exceeding the weight limit. |
| Antikollisionssystemet udløses ofte. | Obstruction, sensitive setting. | Ensure there are no objects in the desk's path. Refer to the full manual for instructions on adjusting anti-collision sensitivity if available. |
If the problem persists after attempting these solutions, please contact FLEXISPOT customer support for further assistance.
7. Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | FLEXISPOT |
| Model | E3 |
| Produktdimensioner | 55.1" D x 27.5" B x 27.6" H |
| Farve | White Frame + White Top |
| Stil | Moderne |
| Grundmateriale | Metal |
| Top materialetype | Træ |
| Finish Type | Træ |
| Speciel funktion | ledning |
| Møbelfinish | Hvid |
| Størrelse | 55"x28" Helt stykke |
| Inkluderede komponenter | Keyboard Tray, Monitor Arm (Note: Components may vary by package) |
| UPC | 840460427586 |
| Item Height (Adjustable Range) | 27.6 inches (Min) to 46.8 inches (Max) |
| Maksimal vægtanbefaling | 220 pund (100 kg) |
| Påkrævet samling | Ja |
| Motortype | Dobbelt motor |
| Støjniveau | Under 50 dB |
8. Garanti og support
FLEXISPOT tilbyder omfattende garantidækning for din ro i sindet:
- 5-årig dækning: Gælder for skrivebordsstellet og motoren.
- 2-årig dækning: Applies to the control panel and other electronics.
For any assistance, warranty claims, or technical support, please contact FLEXISPOT customer service. Refer to your purchase documentation or the official FLEXISPOT webwebsted for kontaktoplysninger.
