Vigtige sikkerhedsforanstaltninger
Please read all instructions carefully before using your KEENSTAR Food Dehydrator. Retain this manual for future reference.
- Læs alle instruktioner.
- Rør ikke ved varme overflader. Brug håndtag eller knopper.
- For at beskytte mod elektrisk stød må ledningen, stikket eller apparatet ikke nedsænkes i vand eller anden væske.
- Tæt opsyn er nødvendigt, når et apparat bruges af eller i nærheden af børn.
- Tag stikket ud af stikkontakten, når den ikke er i brug, og før rengøring. Lad det køle af, før du sætter dele på eller af.
- Betjen ikke noget apparat med en beskadiget ledning eller stik, eller efter at apparatet ikke fungerer korrekt eller er blevet beskadiget på nogen måde. Kontakt kundeservice for at få hjælp.
- Brug af tilbehør, der ikke er anbefalet af apparatets producent, kan forårsage skader.
- Må ikke bruges udendørs.
- Lad ikke ledningen hænge ud over kanten af et bord eller bord, eller rør ved varme overflader.
- Må ikke placeres på eller i nærheden af en varm gas- eller elektrisk brænder eller i en opvarmet ovn.
- Der skal udvises ekstrem forsigtighed ved flytning af et apparat, der indeholder varm olie eller andre varme væsker.
- Sæt altid stikket i apparatet først, og sæt derefter ledningen i stikkontakten. For at afbryde forbindelsen skal du slukke for en vilkårlig knap og derefter tage stikket ud af stikkontakten.
- Brug ikke apparatet til andet end det tilsigtede.
- Dette apparat har et polariseret stik (det ene blad er bredere end det andet). For at reducere risikoen for elektrisk stød er dette stik beregnet til kun at passe i en polariseret stikkontakt på én måde. Hvis stikket ikke passer helt ind i stikkontakten, vend stikket om. Hvis det stadig ikke passer, skal du kontakte en kvalificeret elektriker. Forsøg ikke at ændre stikket på nogen måde.
Produkt overview
Komponenter
- Hoveddehydratorenhed
- 9 bakker i rustfrit stål
- 1 Fruit Roll Sheet
- 2 mesh skærme
- Brugermanual
- Opskriftsbog

Nøglefunktioner
- Premium rustfrit stålkonstruktion: The dehydrator shell is made of stainless steel, ensuring durability and a sleek appearance.
- BPA-Free 304 Stainless Steel Trays: Nine corrugated mesh trays provide ample drying space and are safe for food contact.
- Digital Adjustable Timer: Set dehydration times from 30 minutes up to 48 hours.
- Digital Adjustable Temperature Control: Precisely control drying temperatures from 95°F to 165°F (35°C to 74°C).
- Horizontal Airflow System with Dual Fans: Ensures even heat distribution across all trays, eliminating the need to rotate trays during the drying process.
- Stor kapacitet: With 9 trays, the dehydrator offers 8.7 square feet of total drying space, suitable for large batches.
- Transparent Door: Allows for easy monitoring of the drying process without opening the unit.
- Sikkerhedsfunktioner: Includes automatic shutoff and overheat protection for safe operation.
- Let at rengøre: Stainless steel trays are dishwasher-safe for convenient cleaning.

Opsætning og første brug
- Udpakning: Carefully remove all packaging materials from the dehydrator and its accessories. Inspect the unit for any signs of damage.
- Indledende rengøring: Before the first use, wash the stainless steel trays, fruit roll sheet, and mesh screens in warm, soapy water. Rinse them thoroughly and dry completely. Wipe the interior and exterior surfaces of the main dehydrator unit with a damp klæde. Nedsænk ikke hovedenheden i vand.
- Placering: Place the dehydrator on a stable, flat, and heat-resistant surface. Ensure there is adequate space (at least 6 inches) around the unit for proper ventilation. Do not place it near heat sources or flammable materials.
Betjeningsvejledning
Kontrolpanel overview

- TIME-knap: Used to adjust the dehydration time.
- TEMP knap: Used to adjust the dehydration temperature.
- SET -knap: Toggles between time and temperature settings for adjustment.
- Pil op/ned: Used to increase or decrease the selected time or temperature value.
- START/STOP (Power) Button: Turns the unit on/off and initiates or pauses the dehydration process.
Preparing Food for Dehydration
- Always wash and clean food thoroughly before preparation.
- Slice food into uniform thickness to ensure even drying. Thinner slices will dry faster.
- Some foods may benefit from pre-treatment (e.g., blanching vegetables, soaking fruits in lemon juice) to prevent discoloration or improve texture. Refer to the included recipe book or a reliable dehydration guide for specific recommendations.
Ilægning af bakker

- Arrange prepared food in a single layer on the stainless steel trays. Ensure there is enough space between pieces for air to circulate freely. Do not overlap food.
- For smaller items like herbs or berries, use the provided mesh screens to prevent them from falling through the tray grids.
- When making fruit leathers, spread pureed fruit evenly onto the fruit roll sheet.
- Carefully slide the loaded trays into the dehydrator.
Indstilling af tid og temperatur
- Plug the dehydrator into a standard 120V AC power outlet.
- Tryk på START/STOP button to turn on the unit. The display will illuminate, showing default time and temperature settings.
- Tryk på SÆT button to select either the TIME or TEMP setting. The selected value will flash on the display.
- Brug Pil op/ned to adjust the desired time or temperature.
- Trykke SÆT again to confirm the setting or to switch to adjusting the other parameter.
- Once both time and temperature are set, press the START/STOP button to begin the dehydration process. The unit will start heating, and the internal fans will activate.
Overvågning og færdiggørelse
- The transparent door allows you to monitor the drying process without opening the unit, which helps maintain consistent internal temperature.
- Periodically check the food for your desired level of dryness. Drying times can vary significantly based on the type of food, its thickness, and initial moisture content.
- When dehydration is complete, press the START/STOP knappen for at slukke for enheden.
- Unplug the dehydrator from the wall outlet and allow the food and trays to cool completely before removing them.
- Store dehydrated food in airtight containers in a cool, dark place to maintain freshness.
Dehydration Guidelines
The following table provides general temperature and time ranges for common foods. These are approximate values; actual drying times may vary. Always ensure food is thoroughly dried for safe storage.
| Fødevaretype | Temperaturområde | Omtrentlig tid |
|---|---|---|
| Frugt (f.eks. æbler, bananer, bær) | 130-140°F (54-60°C) | 6-20 timer |
| Vegetables (e.g., carrots, zucchini, tomatoes) | 125°F (52°C) | 4-12 timer |
| Meats (e.g., beef jerky, poultry) | 145-160°F (63-71°C) | 4-15 timer |
| Herbs (e.g., basil, oregano, mint) | 95-105°F (35-40°C) | 2-6 timer |
| Dog Treats | 145-160°F (63-71°C) | 4-12 timer |




Vedligeholdelse og rengøring
Regular cleaning ensures optimal performance and extends the lifespan of your dehydrator.

- Tag stikket ud og køl ned: Always unplug the dehydrator from the power outlet and allow it to cool completely before cleaning any parts.
- Clean Trays and Accessories: Remove the stainless steel trays, mesh screens, and fruit roll sheets. These can be washed by hand in warm, soapy water or placed in a dishwasher (trays are dishwasher-safe). Rinse thoroughly and dry completely.
- Rengør hovedenhed: Wipe the interior and exterior surfaces of the main dehydrator unit with a soft, damp cloth. For stubborn food residues, use a mild detergent on the cloth. Do not immerse the main unit in water or any other liquid.
- Tørring og opbevaring: Ensure all parts are completely dry before reassembling or storing the dehydrator. Store the unit in a clean, dry place.
- Undgå slibemidler: Do not use abrasive cleaners, scouring pads, or harsh chemicals, as these can damage the surfaces of the dehydrator.
Fejlfinding
If you encounter any issues with your dehydrator, refer to the following common problems and solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Tørremaskinen tænder ikke. | Ikke tilsluttet; problem med stikkontakt; enhed ikke tændt. | Ensure the power cord is securely plugged into a working wall outlet. Press the START/STOP button. |
| Maden tørrer ikke jævnt. | Food sliced unevenly; trays overloaded. | Ensure food is sliced to uniform thickness. Do not overload trays; arrange food in a single layer with space for airflow. The horizontal airflow system is designed to minimize uneven drying. |
| Dehydratoren stopper under drift. | Overophedningsbeskyttelse aktiveret. | Unplug the unit and allow it to cool down for at least 30 minutes. Plug it back in and restart the dehydration process. Ensure proper ventilation around the unit. |
| Usædvanlig støj under drift. | Trays not properly seated; foreign object inside. | Ensure all trays are correctly inserted and seated. Unplug the unit and inspect the interior for any obstructions. |
Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | KEENSTAR |
| Modelnummer | GJ-802 |
| Materiale | Stainless Steel (shell), 304 Stainless Steel (trays) |
| Farve | Sølv |
| Wattage | 1000 watt |
| Produktdimensioner (DxBxH) | 11.4" D x 12.2" B x 16.7" H |
| Voltage | 120 volt |
| Varens vægt | 13.34 pund |
| Antal bakker | 9 |
| Temperaturområde | 95-165°F (35-74°C) |
| Timer rækkevidde | 30 minutter - 48 timer |
| Opvaskemaskine-sikre bakker | Ja |
Garanti og support
Your KEENSTAR Food Dehydrator Machine is covered by a standard manufacturer's warranty. Please refer to the warranty card included in your product package for specific terms, conditions, and duration of coverage.
For technical support, troubleshooting assistance, or any service inquiries, please contact KEENSTAR customer service. Contact information can typically be found on the warranty card or the official KEENSTAR webwebsted.





