DaVinci Toddler Bed Conversion Kit M19699 User Manual

1. Introduktion

This manual provides essential instructions for the assembly, use, and maintenance of your DaVinci Toddler Bed Conversion Kit (M19699). This kit is designed to convert your compatible DaVinci or Namesake crib into a toddler bed, offering a secure and independent sleeping environment for your child.

Læs venligst alle instruktioner omhyggeligt inden montering, og gem denne manual til senere brug.

2. Sikkerhedsoplysninger

• Voksensamling påkrævet: Dette produkt skal samles af en voksen.
• Kompatibilitet: Only use this conversion kit with the specified compatible DaVinci and Namesake crib models. Refer to the "Compatible Crib Models" section for a list.
• Sikker installation: Sørg for, at alle fastgørelseselementer er forsvarligt fastspændt før brug. Kontroller regelmæssigt og efterspænd efter behov.
• Forebyggelse af farer: Do not place the toddler bed near windows where cords from blinds or drapes could strangle a child. Do not suspend strings or toys over the bed.
• Ikke-giftig finish: The product is finished with a non-toxic multi-step staining and painting process, and is lead and phthalate safe.
• Vægtgrænse: Adhere to the weight limits specified for your original crib when converted to a toddler bed.

Image: The DaVinci Toddler Bed Conversion Kit is GREENGUARD Gold Certified, indicating low chemical emissions for healthier indoor air quality.

3. Reservedelsliste

Please verify that all parts are present before beginning assembly. If any parts are missing or damaged, do not proceed with assembly. Contact customer support for assistance.

• Toddler Bed Rail (1)
• Hardware Pack (screws, bolts, etc. - specific to your crib model)

Image: The main component of the kit, a single toddler bed rail in powder blue, designed to replace one side of a crib.

4. Kompatible tremmesengsmodeller

This conversion kit is compatible with the following crib models:

• DaVinci Compatible Crib Models:
  • Marisol (F30301)
  • Fiona (M20801)
  • Frem (M27301)
• Namesake Compatible Crib Models:
  • Brimsley (M26742, M26701)
  • Eloise (M24801)

Using this kit with non-listed crib models may compromise safety and void the warranty.

5. Opsætnings- og monteringsvejledning

Follow these steps to convert your compatible crib into a toddler bed. It is recommended to have two adults for assembly.

1. Forbered vuggen: Ensure your crib is empty and the mattress support is set to the lowest position.
2. Remove Front Rail: Carefully remove the front rail of your crib according to your crib's original assembly instructions. Keep all hardware from the crib's front rail, as some may be reused.
3. Attach Toddler Rail: Align the DaVinci Toddler Bed Conversion Kit rail with the existing holes on the crib's end panels.
4. Sikker hardware: Using the provided hardware (or hardware from your original crib's front rail, if applicable and specified in your crib's manual), securely attach the toddler rail to the crib's end panels. Do not overtighten.
5. Bekræft stabilitet: Once attached, gently shake the toddler bed to ensure all connections are secure and stable.

Billede: En ligeudgående view of the toddler bed rail, showing the vertical slats and attachment points on the ends, which connect to the crib's existing structure.

6. Betjening og brug

Once converted, the toddler bed provides a lower side rail, allowing your child to independently enter and exit the bed while still offering a barrier to prevent accidental falls during sleep. Ensure the mattress fits snugly within the bed frame without gaps.

7. Vedligeholdelse

• Rensning: Tør med annonceamp klud. Undgå slibende rengøringsmidler eller stærke kemikalier, der kan beskadige overfladen.
• Regelmæssig kontrol: Kontrollér regelmæssigt alle skruer og bolte for at sikre, at de er stramme. Spænd dem igen om nødvendigt.
• Opbevaring: If disassembling for storage, keep all hardware in a secure bag and store in a dry place.

8. Fejlfinding

• Loose Rail: If the toddler rail feels loose, check all connecting hardware and tighten securely. Do not overtighten.
• Vanskeligheder med at justere huller: Ensure you are using the correct hardware and that the crib's end panels are properly aligned. Refer to your original crib manual for specific instructions on removing the front rail.
• Manglende dele: If any parts are missing, do not attempt to substitute with non-original parts. Contact DaVinci customer support.

9. Specifikationer

Image: A diagram illustrating the dimensions of the toddler bed rail: 25 inches in length, 1 inch in width, and 13.75 inches in height.

10. Garanti og support

For warranty information, product support, or to order replacement parts, please contact DaVinci customer service. Refer to the original crib's warranty documentation for specific terms and conditions related to the overall crib structure.

Du kan typisk finde kontaktoplysninger på producentens website or within the original crib's instruction manual.

Fabrikant: DaVinci