EMART bærbart baggrundsstativsæt brugermanual

1. Produktet er slutview

The EMART Portable Backdrop Stand Kit is designed for versatile use in photography, parties, weddings, and various events. It features a foldable cross flat base for stability and space-saving storage, adjustable height and width, and a durable, rust-resistant surface for both indoor and outdoor applications.

Figure 1: EMART Portable Backdrop Stand Kit in use with decorative balloons and a family.

2. Pakkens indhold

Kontroller, at alle komponenter er til stede før montering:

• 2 x Support Stands with Foldable Cross Flat Bases
• 2 x Telescopic Crossbars
• 2 x Water Bags (for added stability)
• 6 x Spring Clamps
• 1 x bæretaske
• Necessary hardware (knobs, screws)

3. Opsætningsvejledning

Follow these steps to assemble your EMART Portable Backdrop Stand Kit:

1. Unfold the Cross Base: Pull up the leg to release the spring fixing buckle from the groove and unfold the cross-shaped flat base on each support stand. Ensure the legs are fully extended for maximum stability.

Figure 2: Detail of unfolding the cross flat base by releasing the spring buckle.
2. Add Water Bags (Optional for Stability): Place a water bag on each unfolded base. Fill the water bags with water to add weight and increase the stability of the backdrop stand, especially for outdoor use or heavier backdrops.


Figure 3: Placing the water bag on the stand base for enhanced stability.

3. Connect Support Rods: Insert the bottom end of each support rod into the center hole of its respective base. Tighten the knob on the base to secure the rod firmly.


Figure 4: Securing the support rod to the base.

4. Forbind tværstænger: Assemble the telescopic crossbars by connecting the sections. Adjust the crossbar to your desired width (from 5.3ft to 10ft).

Figure 5: Assembling and adjusting the crossbar width.
5. Attach Crossbar to Support Stands: Place the assembled crossbar onto the top pins of the two support stands. Tighten the screws on the support stands to firmly secure the crossbar.


Figure 6: Attaching the crossbar to the top of the support stands.

6. Juster højden: Loosen the knobs on the support rods and extend them to the desired height (from 2.6ft to 8.5ft). Tighten the knobs securely to lock the height in place.


Figure 7: Adjusting the height of the backdrop stand.

7. Attach Backdrop: Brug den medfølgende fjederklemmeamps to attach your backdrop, banner, flower wall, or drapes to the crossbar.

4. Betjening af stativet

4.1 Adjusting Height and Width

• Højde: Loosen the knobs on the vertical support rods. Extend or retract the rod sections to achieve the desired height between 2.6ft and 8.5ft. Tighten the knobs firmly to secure.
• Bredde: The crossbars are telescopic. Gently pull or push the sections to adjust the width between 5.3ft and 10ft. Ensure the internal locking pins engage properly for a secure fit.

Figure 8: Visual representation of the adjustable dimensions of the stand.

4.2 Forbedring af stabilitet

• Water Bags: For increased stability, especially outdoors or with heavy backdrops, fill the provided water bags and place them on the cross flat bases.
• Jordpæle: The bases include pre-drilled holes for ground stakes. Use these to secure the stand on grassy areas, providing additional resistance against wind. (Note: Ground stakes are not included in this kit).

Figur 9: Eksamples of stability measures for indoor and outdoor use.

5. Vedligeholdelse og opbevaring

5.1 Rengøring

The stand features a hammer texture with black spray painting, enhancing its rust-proof and scratch-resistant properties. To clean, wipe down with a damp klud. Undgå slibende rengøringsmidler, der kan beskadige overfladen.

5.2 Opbevaring

The stand is designed for easy disassembly and compact storage. Fold the bases, collapse the rods and crossbars, and place all components into the provided carrying bag. Store in a dry place to prolong product life.

Figure 10: Included accessories: water bags, spring clamps, og bæretaske.

6. Fejlfinding

• Stativsvingninger: Ensure all knobs are tightened securely. If used outdoors, fill water bags or use ground stakes. Verify the bases are fully unfolded and on a flat, stable surface.
• Vanskeligheder med at justere højde/bredde: Loosen the adjustment knobs/mechanisms completely before attempting to extend or retract poles. Do not force components.
• Backdrop Sags: Ensure the crossbar is properly secured to both support stands. Use all provided spring clamps to distribute the weight of the backdrop evenly.

7. Specifikationer

8. Garanti og support

For warranty information or technical support, please contact EMART customer service. Refer to the product packaging or the official EMART webhjemmeside for de seneste kontaktoplysninger.

Visit the official EMART Store: EMART Store