AOC Q27G4ZD 27" QD OLED Gaming Monitor User Manual

1.Overview

This manual provides instructions for the setup, operation, maintenance, and troubleshooting of your AOC Q27G4ZD 27-inch QD OLED Gaming Monitor. Please read this manual thoroughly before using the product to ensure proper and safe operation.

The AOC Q27G4ZD monitor features a 27-inch QD OLED panel with a QHD (2560x1440) resolution, a 240Hz refresh rate, and a 0.03ms (GTG) response time. It supports G-Sync Compatible technology and HDR10 for enhanced visual performance.

2. Opsætning

2.1 Udpakning af monitoren

Fjern forsigtigt alle komponenter fra emballagen. Kassen skal indeholde følgende:

• Monitor enhed
• HDMI kabel
• Strømledning
• Brugervejledning (dette dokument)

2.2 Physical Assembly and Placement

Assemble the monitor stand according to the instructions provided in the quick start guide. Ensure the stand is securely attached to the monitor and placed on a stable, flat surface.

Figure 2: The monitor stand allows for height, tilt, swivel, and pivot adjustments for optimal viewkomfort.

The monitor also supports VESA mounting for alternative placement options. Refer to the VESA mounting standard for compatible brackets (not included).

Figur 3: Sideprofile af skærmen, hvilket fremhæver dens slanke design.

2.3 Tilslutning til enheder

The AOC Q27G4ZD monitor offers multiple connectivity options:

• 2 x HDMI 2.0-porte
• 2 x DisplayPort 1.4 ports
• USB 3.2 ports (quantity not specified, but typically for peripherals)
• Audio in/out ports

Figure 4: Rear panel with DisplayPort, HDMI, and USB connections.

Connect the appropriate cable (HDMI or DisplayPort) from your computer or console to the corresponding port on the monitor. Connect the power cord to the monitor and a power outlet.

2.4 Indledende tænding

Press the power button on the monitor. The monitor should automatically detect the input signal. If not, use the On-Screen Display (OSD) menu to manually select the input source.

3. Betjeningsvejledning

3.1 On-Screen Display (OSD) menu

The OSD menu allows you to adjust various monitor settings. Typically, buttons located on the bottom or rear of the monitor are used to navigate the menu. Refer to the quick start guide for specific button functions.

3.2 Skærmindstillinger

Adjust settings such as brightness, contrast, color temperature, and gamma to suit your preferences. The QD OLED panel provides superb picture quality and sharp imagery.

Figure 5: Visual representation of vibrant colors and deep contrasts provided by QD OLED technology.

The monitor supports HDR10 technology, offering greater depth, nuance, and vibrancy in colors (110.2% DCI-P3, 147.6% sRGB). It also features VESA Certified DisplayHDR 400 True Black for incredible contrast and lifelike visuals.

Figure 6: Illustration of enhanced contrast and detail in both dark and bright areas.

3.3 Spilfunktioner

The Q27G4ZD is designed for high-performance gaming:

• Opdateringshastighed: Experience smooth visuals with a 240Hz refresh rate.
• Svartid: A 0.03ms (GTG) response time minimizes ghosting and motion blur.
• G-Sync Compatible: This feature synchronizes the monitor's refresh rate with your GPU or console, reducing screen tearing and stuttering.

Figure 7: Visual representation of smooth motion and rapid response time during gaming.

Figure 8: Illustration of gameplay without screen tearing or stuttering, enabled by G-SYNC.

3.4 Console Gaming

AGON by AOC monitors are optimized for console gaming, supporting up to 120Hz frame rates and ultra-low latency. Exact performance may vary depending on the console model.

4. Vedligeholdelse

4.1 Rengøring af monitoren

For at rengøre skærmen skal du forsigtigt tørre den af ​​med en blød, fnugfri klud. Tør den forsigtigt af med en blød, fnugfri klud, hvis du har genstridige mærker.ampRengør kluden med vand eller et mildt, ikke-slibende skærmrensemiddel. Undgå at bruge skrappe kemikalier eller slibende materialer.

Til skærmen casinBrug en blød, tør klud. Sprøjt ikke rengøringsvæsker direkte på skærmen.

4.2 Pixel Care

OLED panels are susceptible to temporary image retention or burn-in if static images are displayed for extended periods. To prevent this, enable screen saver functions, use dynamic wallpapers, and turn off the monitor when not in use.

5. Fejlfinding

Hvis du støder på problemer med din skærm, kan du se følgende almindelige problemer og løsninger:

• Ingen strøm: Ensure the power cord is securely connected to both the monitor and the power outlet. Check if the power outlet is functional.
• Intet signal: Verify that the video cable (HDMI or DisplayPort) is correctly connected to both the monitor and your device. Select the correct input source via the OSD menu.
• Flimrende eller forvrænget billede: Check the video cable for damage. Ensure your graphics card drivers are up to date. Adjust the refresh rate settings on your computer.
• Forkerte farver: Reset the monitor to factory default settings via the OSD menu. Adjust color settings (brightness, contrast, color temperature) as needed.
• Døde pixel: Refer to the warranty section for information regarding pixel policies.

For further assistance, please contact AOC customer support.

6. Specifikationer

7. Garanti og support

AOC provides comprehensive warranty coverage for the Q27G4ZD monitor:

• 3-Year Zero Dead Pixel Guarantee: Ensures your display is free from dead pixels.
• 3-Year Advance Replacement: In case of a covered defect, a replacement unit will be shipped to you.
• 1-Year One-Time Accidental Damage Coverage: Protection against unforeseen physical damage for the first year.

For warranty claims, technical support, or further inquiries, please visit the official AOC support website or contact their customer service department. Keep your purchase receipt and monitor serial number handy for faster service.

AOC-support Webwebsted: https://us.aoc.com/support