Hanwha Vision PNM-9022V P-serien 8MP panoramisk vandal dome IP-kamera brugermanual

1. Introduktion

This user manual provides comprehensive instructions for the installation, operation, and maintenance of the Hanwha Vision PNM-9022V P-Series 8MP Panoramic Vandal Dome IP Camera. This camera is designed for high-resolution video surveillance in various environments, offering robust performance and wide area coverage.

Læs venligst denne manual grundigt, inden du bruger produktet, for at sikre korrekt og sikker betjening.

2. Sikkerhedsoplysninger

• Sørg for, at alle elektriske forbindelser overholder lokale forskrifter og bestemmelser.
• Udsæt ikke kameraet for ekstreme temperaturer, fugtighed eller ætsende miljøer.
• Disconnect power before performing any maintenance or installation procedures.
• Brug kun tilbehør specificeret af producenten.
• Håndter kameraet forsigtigt for at undgå fysisk skade.
• Opbevares utilgængeligt for børn.

3. Pakkens indhold

Bekræft at alle varer er til stede i pakken:

• Hanwha Vision PNM-9022V P-Series 8MP Panoramic Vandal Dome IP Camera
• Monteringsudstyr (skruer, ankre)
• Installationsskabelon
• Hurtig startvejledning

Note: Specific contents may vary slightly depending on the region or package version.

4. Produktet er slutview

The Hanwha Vision PNM-9022V is an 8MP panoramic vandal dome IP camera designed for comprehensive surveillance. It features a durable dome housing and a fixed 2.8mm lens for wide-angle coverage.

Figur 4.1: Forside view of the Hanwha Vision PNM-9022V camera. The image shows a white dome-shaped camera with a dark, transparent lower section revealing the internal camera lenses and components. The "Wisenet" logo is visible on the top white part of the dome.

Nøglekomponenter:

• Dome Cover: Protective, vandal-resistant housing.
• Kameramodul: Contains the 8MP sensor and 2.8mm fixed lens.
• Monteringsbase: Til sikker montering på vægge eller lofter.
• Ethernet Port (PoE+): For network connection and power supply.
• Micro SD/SDHC/SDXC Slots: Two slots for local storage.

5. Opsætning og installation

5.1 Valg af sted

Choose a location that provides optimal coverage and is within range of your network infrastructure. Consider lighting conditions and potential obstructions.

5.2 Montering af kameraet

1. Forbered overfladen: Ensure the mounting surface is clean, flat, and strong enough to support the camera's weight.
2. Use the Template: Place the provided installation template on the desired mounting location and mark the drill holes.
3. Bore huller: Drill pilot holes according to the marked points. Insert wall anchors if necessary.
4. Fastgør basen: Attach the camera's mounting base to the surface using the supplied screws.
5. Tilslut kabler: Route the Ethernet cable through the mounting base and connect it to the camera's Ethernet port. Ensure a secure connection for both data and PoE+ power.
6. Attach Camera Body: Secure the main camera body to the mounting base, ensuring it clicks into place or is fastened according to the specific model's mechanism.
7. Juster vinkel: Once mounted, adjust the camera's viewvinkel efter behov.

5.3 Netværksforbindelse

The PNM-9022V supports Power over Ethernet (PoE+). Connect the camera to a PoE+ enabled switch or injector using a standard Ethernet cable. The camera will power on automatically.

For initial setup and configuration, access the camera's web interface via its IP address. Refer to the Quick Start Guide for default IP address and login credentials.

6. Betjening af kameraet

6.1 Adgang til Web Interface

Åbn a web browser and enter the camera's IP address. Log in using the administrator credentials. The web interface allows you to configure all camera settings, including:

• Network settings (IP address, DNS)
• Video and audio settings (resolution, frame rate, compression)
• Recording schedules and storage (SD card, NAS)
• Event detection (motion, tampering) and alarms
• User management and security settings

6.2 Videoovervågning

Live video streams can be viewed directly from the web interface or through compatible Network Video Recorders (NVRs) and Video Management Software (VMS). The panoramic view provides comprehensive coverage of the monitored area.

6.3 Optagelse og opbevaring

The camera supports recording to local Micro SD/SDHC/SDXC cards (two slots available) or to network-attached storage (NAS). Configure recording settings, including continuous recording, event-triggered recording, and pre/post-alarm recording, via the web interface.

7. Vedligeholdelse

7.1 Rengøring af kameraet

• Regularly clean the dome cover with a soft, damp klud til at fjerne støv og snavs.
• Do not use abrasive cleaners, solvents, or strong detergents, as they may damage the surface.
• For stubborn marks, use a mild soap solution and wipe gently.

7.2 firmwareopdateringer

Periodically check the Hanwha Vision website for firmware updates. Keeping the firmware updated ensures optimal performance, security, and access to new features. Follow the instructions provided with the firmware update package carefully.

7.3 Miljøhensyn

While the camera is IP66 rated for weather resistance and IK10 rated for vandal resistance, extreme environmental conditions (e.g., prolonged direct sunlight, severe storms) can affect its lifespan. Ensure proper installation to minimize exposure to such conditions.

8. Fejlfinding

Kontakt teknisk support, hvis problemet fortsætter.

9. Specifikationer

10. Garanti og support

10.1 Garantioplysninger

For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official Hanwha Vision webwebsted. Gem din købsbevis til garantikrav.

10.2 Teknisk support

If you encounter any issues that cannot be resolved using the troubleshooting guide, please contact Hanwha Vision technical support. Support contact information can typically be found on the official webwebsted eller i produktemballagen.

When contacting support, please have your product model number (PNM-9022V) and serial number ready.