Hanwha Vision PNM-9031RV P-serien 15MP IR panoramakamera til vandaldome, brugermanual

1. Produktet er slutview

The Hanwha Vision PNM-9031RV P-Series 15MP IR Panoramic Vandal Dome Camera is an advanced surveillance solution designed for comprehensive monitoring of large areas. It features ultra-high-definition 15MP resolution for exceptional clarity and detail.

Nøglefunktioner omfatter:

• 15MP Ultra-High Resolution: Provides exceptional image clarity and detail.
• Four 4.3mm Fixed Lenses: Delivers a wide panoramic field of view.
• Infrarød (IR) belysning: Enhances night vision up to 30 meters for optimal low-light performance.
• Vandal-resistent design: Ensures durability in challenging environments.
• Vejrbestandigt hus: Guarantees reliable outdoor performance.
• Ideal for Large Area Monitoring: Suitable for retail spaces, parking lots, and public areas.

Figure 1: Hanwha Vision PNM-9031RV P-Series 15MP IR Panoramic Vandal Dome Camera. This image shows the white dome camera with its black base and clear protective cover, revealing the multiple lenses inside.

2. Pakkens indhold

Kontroller, at alle komponenter er til stede i pakken, før du fortsætter installationen.

• PNM-9031RV P-Series 15MP IR Panoramic Vandal Dome Camera
• Installationsvejledning / Quick Start Guide
• Monteringsskruer og ankre
• Vandtæt hætte til Ethernet-kabel (hvis relevant)

3. Opsætning og installation

This section outlines the general steps for installing your PNM-9031RV camera. Professional installation is recommended for optimal performance and safety.

3.1. Valg af sted

• Choose a location that provides the desired panoramic view and is within range of your network and power source.
• Sørg for, at monteringsfladen er stærk nok til at bære kameraets vægt.
• Consider environmental factors, as the camera is weatherproof but extreme conditions may require additional protection.

3.2. Montering af kameraet

1. Carefully remove the dome cover by twisting or unlatching as per the quick start guide.
2. Use the provided mounting template (if included) to mark drill holes on the chosen surface.
3. Bor forhuller og isæt vægankre om nødvendigt.
4. Secure the camera base to the mounting surface using the supplied screws.

3.3. Ledninger og forbindelser

• Magt: Connect the camera to a suitable power source (e.g., PoE or 12V DC adapter, not included). The camera supports Power over Ethernet (PoE) for simplified installation.
• Netværk: Connect an Ethernet cable from your network switch or router to the camera's RJ45 port. Ensure a secure connection, especially if using the waterproof cap for outdoor installations.
• Andre forbindelser: Refer to the detailed installation manual for any alarm I/O or audio connections.

3.4. Indledende konfiguration

1. Once powered on, the camera will acquire an IP address (either via DHCP or a default static IP).
2. Få adgang til kameraets web grænseflade ved hjælp af en web browser and its IP address.
3. Follow the on-screen prompts to set up a strong administrator password and configure basic network settings.
4. Adjust the camera's view and focus if necessary, though fixed lenses minimize this need.
5. Reattach the dome cover securely, ensuring the vandal-resistant features are engaged.

4. Betjening af kameraet

The PNM-9031RV camera is designed for continuous surveillance. Operation is primarily managed through its web interface or a compatible Network Video Recorder (NVR) / Video Management System (VMS).

4.1. Adgang til live View

• Åbn a web browseren og indtast kameraets IP-adresse.
• Log in with your administrator credentials.
• Naviger til "Live" View" section to see the panoramic feed from the four lenses stitched together.
• Utilize the digital PTZ (Pan-Tilt-Zoom) features within the panoramic view to focus on specific areas of interest.

4.2. Optagelse og lagring

• Configure recording schedules and motion detection settings via the web interface or NVR/VMS.
• Recordings can be stored on an SD card (if supported and installed), an NVR, or network-attached storage (NAS).

4.3. Avancerede funktioner

• IR-belysning: The camera automatically activates its infrared LEDs in low-light conditions to provide clear black-and-white images up to 30 meters.
• Bevægelsesdetektion: Set up specific zones for motion detection to trigger alarms or recordings.
• Begivenhedsmeddelelser: Configure email alerts or other notifications for detected events.
• Videoanalyse: The camera may support advanced analytics such as virtual line crossing, enter/exit detection, and heatmap generation. Refer to the full manual for details.

5. Vedligeholdelse

Regelmæssig vedligeholdelse sikrer kameraets levetid og optimale ydeevne.

• Rensning: Periodically clean the clear dome cover with a soft, damp klud. Undgå slibende rengøringsmidler, der kan ridse overfladen.
• Firmwareopdateringer: Check the Hanwha Vision website regularly for firmware updates. Updating firmware can improve performance, add new features, and address security vulnerabilities.
• Kabelinspektion: Annually inspect all cables and connections for wear, corrosion, or damage, especially for outdoor installations.
• Systemtjek: Periodically verify that recordings are being made and that the camera's live view is accessible and clear.

6. Fejlfinding

Dette afsnit omhandler almindelige problemer, du kan støde på.

For more detailed troubleshooting, refer to the complete product manual available on the Hanwha Vision support webwebsted.

7. Specifikationer

8. Garanti og support

This Hanwha Vision product comes with a manufacturer's warranty. Please refer to the official Hanwha Vision website or the warranty card included with your product for specific terms and conditions.

For technical support, product documentation, and software downloads, please visit the official Hanwha Vision support portal:

Hanwha Vision Support

When contacting support, please have your product model number (PNM-9031RV) and serial number ready.