BILT HARD 35-Ton Log Splitter

BILT HARD 35-Ton Horizontal/Vertical Gas Powered Hydraulic Log Splitter

Brugermanual

1. Introduktion

Thank you for choosing the BILT HARD 35-Ton Horizontal/Vertical Gas Powered Hydraulic Log Splitter. This manual provides essential information for the safe assembly, operation, and maintenance of your log splitter. To ensure optimal performance and user safety, please read this manual thoroughly before operating the equipment. Keep this manual for future reference.

2. Produktet er slutview

The BILT HARD 35-Ton Log Splitter is designed for efficient and powerful wood splitting. It features a robust engine, a high-capacity hydraulic system, and the versatility of both horizontal and vertical splitting positions.

BILT HARD 35-Ton Log Splitter

Image 2.1: The BILT HARD 35-Ton Horizontal/Vertical Gas Powered Hydraulic Log Splitter.

Nøglekomponenter:

Diagram of BILT HARD 35-Ton Log Splitter Components

Image 2.2: Diagram illustrating the main components of the log splitter, including the engine, hydraulic cylinder, splitting wedge, and tow bar.

3. Sikkerhedsinstruktioner

Operating a log splitter can be dangerous if proper safety precautions are not followed. Always prioritize safety to prevent serious injury or property damage.

Generel sikkerhed:

Personligt beskyttelsesudstyr (PPE):

Log Splitting Specific Safety:

4. Montering

The BILT HARD 35-Ton Log Splitter is shipped in a crate and requires assembly. It is recommended that at least two people are involved in the assembly process due to the weight and size of the components. Refer to the detailed assembly instructions provided in the full product manual and any accompanying assembly videos for proper setup.

Log splitter shipped in crate and assembled unit

Image 4.1: The log splitter as received in its shipping crate and the fully assembled unit. Assembly requires careful attention to detail and assistance.

Ensure all fasteners are securely tightened before initial operation. Check hydraulic hose connections for leaks and proper routing.

5. Opsætning og kontrol før drift

Before each use, perform the following checks to ensure safe and efficient operation:

Detail of 2-inch ball coupler and safety chainsDetail of 16-inch DOT tire

Image 5.1: Close-up of the 2-inch ball coupler with safety chains and the 16-inch DOT-certified tire, essential for secure towing and transport.

6. Betjening

This log splitter can operate in both horizontal and vertical positions, offering flexibility for various log sizes and user preferences.

6.1 Starting the Engine:

  1. Ensure the log splitter is on a level surface and the wheels are chocked if not hitched.
  2. Drej brændstofventilen til "ON"-positionen.
  3. Flyt chokerhåndtaget til "CHOKE"-positionen (hvis motoren er kold).
  4. Sæt gashåndtaget i positionen "HURTIG".
  5. Træk i startsnoren, indtil motoren starter.
  6. Når motoren starter, skal du gradvist flytte chokerhåndtaget til "RUN"-positionen.

6.2 Switching Between Horizontal and Vertical Positions:

The log splitter can be easily converted between horizontal and vertical splitting modes. Consult the full manual for specific instructions on safely changing the beam position.

Log splitter in horizontal splitting positionLog splitter in vertical splitting position

Image 6.1: The log splitter operating in horizontal mode (left) and vertical mode (right), demonstrating its dual-position capability.

6.3 Splitting Logs:

Close-up of log splitting action

Billede 6.2: Et nærbillede view of the splitting wedge engaging a log, illustrating the powerful 35-ton splitting force.

7. Vedligeholdelse

Regular maintenance is crucial for the longevity and safe operation of your log splitter.

7.1 Engine Maintenance:

7.2 Hydraulic System Maintenance:

Nærbillede af 2-ernetage gear pump

Billede 7.1: 2-ernetage gear pump, a key component of the hydraulic system, requiring regular inspection for optimal performance.

7.3 General Maintenance:

8. Fejlfinding

Dette afsnit indeholder løsninger på almindelige driftsproblemer. Kontakt kundesupport, hvis du har problemer, der ikke er nævnt her.

ProblemMulig årsagLøsning
Motoren starter ikkeIntet brændstof, gammelt brændstof, tændrørsproblem, chokerindstilling.Kontroller brændstofniveauet, brug frisk brændstof, inspicer/udskift tændrøret, juster chokeren.
Loss of splitting forceLow hydraulic fluid, air in hydraulic system, worn pump.Check hydraulic fluid level, bleed air from system (refer to manual), inspect pump.
Ram moves slowlyLow hydraulic fluid, incorrect engine RPM, cold hydraulic fluid.Check fluid level, ensure engine is at full throttle, allow fluid to warm up.
Log jams on wedgeLog too large, knot in log, improper log placement.Do not force. Reverse ram, reposition log, or split smaller pieces.

9. Specifikationer

FeatureDetalje
Splittende kraft35 tons
Motor301cc OHV, 10 HP
Max loglængde24 tommer
Cyklus tid16 seconds (auto return)
Hydraulik pumpe2-Stage Gear Pump, 14 GPM
Hydraulisk væskekapacitet7 gallons
Dæk16-inch DOT-certified
Towable SpeedOp til 45 MPH
Kobler2-inch Ball Coupler
Varens vægt640 pund
Pakkedimensioner72.65 x 28.95 x 23.62 tommer
Dimensions diagram of the BILT HARD 35-Ton Log Splitter

Billede 9.1: Dimensionel overview of the BILT HARD 35-Ton Log Splitter, showing length, width, and height.

10. Garanti og kundesupport

BILT HARD is committed to providing excellent customer service. For any questions, problems, or warranty inquiries regarding your log splitter, please contact our support team. Refer to your purchase documentation for specific warranty terms and contact information.

Assistance from our support team is readily available via Amazon email for prompt resolution of any concerns.

Relaterede dokumenter - 35-tons logsplitter

Preview BILT HARD Brændekløver TL-LS65 Brugermanual
Denne manual indeholder sikkerhedsadvarsler, betjeningsvejledninger, specifikationer og vedligeholdelsesoplysninger for BILT HARD TL-LS65 brændekløveren.
Preview BILT HARD Brændekløver TLA-0101 Brugermanual
Comprehensive owner's manual for the BILT HARD TLA-0101 Log Splitter, covering safety, operation, maintenance, specifications, and troubleshooting. Includes detailed instructions and parts list.
Preview BILT HARD Brændekløver TLA-0101 Brugermanual
Omfattende brugermanual til BILT HARD TLA-0101 brændekløveren, der dækker sikkerhedsinstruktioner, betjening, vedligeholdelse, specifikationer, fejlfinding og reservedelsliste.
Preview BILT HARD TLA-0102 Brændekløver Brugermanual: Sikkerhed, betjening og vedligeholdelse
Omfattende brugermanual til BILT HARD TLA-0102 brændekløveren. Dækker sikkerhedsadvarsler, betjeningsvejledning, opsætning, vedligeholdelse, fejlfinding og en reservedelsliste. Sørg for sikker og effektiv brug af din brændekløver.
Preview BILT HARD 173CC OHV benzinmotor med vertikal aksel, brugermanual og sikkerhedsinstruktioner
Omfattende brugermanual og sikkerhedsinstruktioner til BILT HARD 173CC OHV benzinmotor med vertikal aksel (model TL-EG-V173). Dækker specifikationer, opsætning, betjening, vedligeholdelse, fejlfinding og garantioplysninger.
Preview BILT HARD benzindrevet jordbor instruktionsmanual
Brugsanvisning til BILT HARD gasdrevet jordbor, SKU: TDA-0651. Indeholder vigtige sikkerhedsforanstaltninger, opsætningsforholdsregler, betjeningsvejledning, vedligeholdelsesretningslinjer og garantioplysninger.