1. Introduktion
This manual provides instructions for the proper use and maintenance of the Dasqua 7 Piece 0-16-Inch Electronic Depth Gage Set, model 4710-1205. This electronic depth gage is designed for precise depth measurements in various industrial and scientific applications. It features a digital display for clear readings and is constructed for durability and accuracy.
Image 1.1: The Dasqua 7 Piece 0-16-Inch Electronic Depth Gage Set, showing the main unit and various measurement rods.
2. Pakkens indhold
Bekræft at alle komponenter er til stede i pakken:
- Electronic Depth Gage Unit
- Set of Measurement Rods (7 pieces)
- Opbevaringskasse
- Warranty Letter
Image 2.1: The complete Dasqua Electronic Depth Gage Set, including the main unit, measurement rods, and storage case.
3. Nøglefunktioner
- Opløsning: 0.0005-inch / 0.01mm for precise measurements.
- Standard overholdelse: Manufactured in accordance with DIN863 standards.
- Spindel: Hardened, ground, and lapped for enhanced accuracy.
- Alsidighed: Designed to accommodate a broad range of measurement applications.
- Vise: Large, digital display for clear and quick readings.
- Konstruktion: Hardened stainless steel base and rods resist wear, ensuring durability and consistent accuracy.
- Nulstilling: Ability to reset to zero at any position for comparative depth measurements.
4. Opsætningsvejledning
4.1. Batteriinstallation
The electronic depth gage typically uses a CR2032 lithium coin cell battery. To install or replace the battery:
- Locate the battery compartment cover on the back of the digital display unit.
- Use a small screwdriver or coin to open the cover.
- Indsæt et nyt CR2032-batteri med den positive (+) side opad.
- Sæt batterirummets dæksel på igen.
4.2. Attaching Measurement Rods
Select the appropriate measurement rod for the desired depth range. The set includes rods of various lengths.
- Identify the threaded end of the measurement rod.
- Carefully screw the rod into the threaded hole at the bottom of the depth gage's base until it is finger-tight. Do not overtighten.
- Ensure the rod is securely attached and straight.
Image 4.1: The electronic depth gage with a measurement rod properly attached to its base.
Image 4.2: A selection of the hardened stainless steel measurement rods provided with the depth gage set.
5. Betjeningsvejledning
5.1. Tænd/sluk
- Tryk på ON/OFF knappen for at tænde enheden.
- Tryk på ON/OFF button again to power off the device.
5.2. Unit Conversion (Inch/Millimeter)
- Tryk på mm/in button to switch between millimeter (mm) and inch (in) units. The selected unit will be displayed on the screen.
5.3. Zero Setting
The zero-reset function allows for comparative measurements or setting a reference point.
- Place the depth gage on a flat, stable reference surface, ensuring the measurement rod is fully retracted or resting on the surface.
- Tryk på NUL button. The display will show '0.000' or '0.00'.
5.4. At foretage en måling
- Ensure the depth gage is zeroed on a reference surface.
- Place the base of the depth gage firmly on the surface from which the depth is to be measured.
- Lower the measurement rod into the hole or recess until its tip contacts the bottom.
- Aflæs målingen direkte fra det digitale display.
5.5. Hold-funktion
- Tryk på HOLDE knappen for at fryse den aktuelle aflæsning på displayet.
- Tryk på HOLDE knappen igen for at afslutte aflæsningen og vende tilbage til livemåling.
Billede 5.1: Detaljeret view of the digital display, showing the ON/OFF, mm/in, HOLD, and ZERO buttons.
6. Vedligeholdelse
6.1. Rensning
- Wipe the depth gage and rods with a clean, dry, lint-free cloth after each use.
- Til genstridigt snavs, brug en let tør kludampened with isopropyl alcohol. Avoid harsh chemicals or solvents.
- Ensure no liquid enters the electronic components.
6.2. Opbevaring
- Store the depth gage in its protective case when not in use.
- Keep the device in a dry environment, away from direct sunlight, extreme temperatures, and high humidity.
- Hvis produktet opbevares i længere tid, skal batteriet fjernes for at forhindre lækage.
6.3. Udskiftning af batteri
Replace the battery when the display becomes dim or erratic. Refer to Section 4.1 for battery installation instructions.
7. Fejlfinding
- Skærmen er tom eller svag:
Check battery installation. Replace the battery if necessary. Ensure the device is powered on. - Unøjagtige aflæsninger:
Ensure the depth gage is properly zeroed on a flat reference surface. Clean the measurement rod and base to remove any debris. Verify the measurement rod is securely attached. - Knapper reagerer ikke:
Check battery level. If the issue persists after battery replacement, contact customer support.
8. Produktspecifikationer
| Specifikation | Detalje |
|---|---|
| Modelnummer | 4710-1205 |
| Måleområde | 0-16 tommer / 0-400 mm |
| Opløsning | 0.0005 tommer / 0.01 mm |
| Nøjagtighed | 0.0015 tommer / 0.03 mm |
| Materiale | Hærdet rustfrit stål |
| Strømkilde | CR2032 Battery (typical) |
| Pakkedimensioner | 9 x 5 x 2 tommer |
| Varens vægt | 12.8 ounce |
Image 8.1: Detailed specifications and dimensional diagram for the Dasqua 0-16 inch Electronic Depth Gage Set.
9. Garanti og support
This product is supplied with a warranty letter. For specific warranty terms and conditions, please refer to the documentation included in your package. For technical support, service, or inquiries regarding your Dasqua 4710-1205 Electronic Depth Gage Set, please contact the manufacturer directly through their official webwebsted eller kundeservicekanaler.
