Xigmatek Aqua V AIR Arctic Mid-Tower PC Case User Manual

1. Introduktion

This manual provides detailed instructions for the installation, operation, and maintenance of your Xigmatek Aqua V AIR Arctic Mid-Tower PC Case. Please read this manual thoroughly before beginning any installation to ensure proper setup and safe operation. Retain this manual for future reference.

2. Sikkerhedsoplysninger

Overhold følgende sikkerhedsforanstaltninger under installation og drift:

• Afbryd altid strømforsyningen fra stikkontakten, før du installerer eller fjerner komponenter.
• Brug en antistatisk håndledsrem for at forhindre elektrostatisk udladning (ESD) på følsomme komponenter.
• Handle components carefully. Avoid touching pins or circuit boards directly.
• Sørg for tilstrækkelig ventilation omkring pc-kabinettet for at forhindre overophedning.
• Hold små dele og værktøj væk fra børn.
• Forsøg ikke at ændre kabinettet eller dets komponenter, da dette kan ugyldiggøre garantien og udgøre en sikkerhedsrisiko.

3. Pakkens indhold

Bekræft at alle varer er til stede i pakken:

• Xigmatek Aqua V AIR Arctic Mid-Tower PC Case
• Accessory kit (screws, standoffs, cable ties)
• Brugervejledning (dette dokument)

If any items are missing or damaged, contact your retailer or Xigmatek support.

4. Produktet er slutview

The Xigmatek Aqua V AIR Arctic is a mid-tower PC case designed for high-performance gaming configurations. It features tempered glass panels for component visibility and optimized airflow with pre-installed ARGB fans.

Figur 4.1: Foran-venstre view of the Xigmatek Aqua V AIR Arctic PC case, showcasing the tempered glass front and side panels, and the pre-installed ARGB fans.

Figur 4.2: Bagside view of the PC case, showing the I/O shield cutout, expansion slots, and rear fan mount.

Figur 4.3: Top-down vinklet view, highlighting the top mesh panel for additional cooling and the internal layout.

5. Opsætning og installation

Follow these steps to install your PC components into the Xigmatek Aqua V AIR Arctic case.

5.1. Forberedelse af sagen

1. Placer etuiet på en flad, stabil overflade.
2. Remove the tempered glass side panel by unscrewing the thumb screws at the rear and carefully sliding it off. Place it on a soft, non-abrasive surface to prevent scratches.
3. Remove the opposite steel side panel by unscrewing the thumb screws and sliding it off.

5.2. Installation af bundkort

Figur 5.1: Interiør view of the case, illustrating the motherboard mounting area and cable routing cutouts.

1. Installer I/O-skjoldet i udskæringen bag på kabinettet.
2. Align your motherboard with the pre-installed standoffs. Ensure the standoffs match your motherboard's form factor (ATX, Micro ATX).
3. Secure the motherboard using the provided screws from the accessory kit. Do not overtighten.

5.3. Installation af strømforsyningsenhed (PSU)

1. Locate the PSU mounting bracket at the bottom rear of the case.
2. Slide your PSU into the designated compartment from the rear of the case.
3. Fastgør strømforsyningen til kabinettet med de skruer, der fulgte med din strømforsyning.

5.4. Installation af lagerdrev

The case supports multiple storage drives:

• 2.5" SSD'er: Mount directly to the SSD trays located behind the motherboard tray. Secure with screws.
• 3.5" harddiske: Install into the drive cage located beneath the PSU shroud. Slide the drive into the tray and secure with screws.

5.5. Graphics Card (GPU) and Expansion Card Installation

1. Fjern de nødvendige dæksler til udvidelsespladserne på bagsiden af ​​kabinettet.
2. Insert your graphics card or other expansion cards into the appropriate PCIe slots on the motherboard.
3. Secure the cards with the provided screws.

5.6. Kabelforvaltning

Figur 5.2: View behind the motherboard tray, illustrating the ample space and tie-down points for effective cable management.

Brug kabelføringsudskæringerne og fastgørelsespunkterne bag bundkortbakken til at organisere kablerne. Dette forbedrer luftgennemstrømningen og æstetikken.

• Tilslut alle nødvendige strømkabler fra strømforsyningen til bundkortet, GPU'en og lagringsdrevene.
• Connect front panel cables (USB, audio, power/reset switches, LED indicators) to the corresponding headers on your motherboard. Refer to your motherboard manual for specific header locations.
• Connect the ARGB fan cables to the integrated fan controller or directly to your motherboard's ARGB headers if available.

5.7. Fan and Radiator Support

The Xigmatek Aqua V AIR Arctic comes with 7 pre-installed 120mm ARGB fans. Additional cooling options are available:

• Front: Supports up to 3 x 120mm or 2 x 140mm fans / 240mm, 280mm, 360mm radiators.
• Top: Supports up to 3 x 120mm or 2 x 140mm fans / 240mm, 280mm, 360mm radiators.
• Bag: Supports 1 x 120mm fan.
• Bund: Understøtter op til 3 x 120 mm blæsere.

Ensure proper fan orientation for optimal airflow (intake at front/bottom, exhaust at rear/top).

6. Betjening

Once all components are installed and cables are connected, replace the side panels. Connect your monitor, keyboard, mouse, and power cable. Press the power button on the front panel to start your system.

The pre-installed ARGB fans can be controlled via the integrated controller (if present) or through compatible motherboard software, allowing customization of lighting effects and fan speeds.

7. Vedligeholdelse

Regelmæssig vedligeholdelse er med til at sikre optimal ydeevne og levetid for dine pc-komponenter.

• Støvrensning: Periodically clean dust filters (top, front, bottom) to maintain good airflow. Use compressed air to remove dust from inside the case and components.
• Udvendig rengøring: Tør de udvendige overflader af med en blød, damp klud. Undgå slibende rengøringsmidler eller opløsningsmidler.
• Kabelhåndteringstjek: Occasionally check cable routing to ensure no cables are obstructing fans or airflow.

8. Fejlfinding

Hvis du støder på problemer, kan du se følgende almindelige fejlfindingstrin:

• Systemet tænder ikke:
  • Sørg for, at strømforsyningen er tændt og korrekt tilsluttet stikkontakten.
  • Verify all power cables (24-pin ATX, 8-pin CPU, PCIe, SATA) are securely connected.
  • Kontroller forbindelserne på frontpanelets strømafbryder til bundkortet.
• Ingen displayudgang:
  • Ensure the monitor cable is connected to the graphics card (not the motherboard I/O if using a dedicated GPU).
  • Sæt grafikkortet og RAM-modulerne i igen.
• Fans not spinning or ARGB not working:
  • Kontroller blæserens strømforbindelser til bundkortet eller blæserstyringen.
  • Verify ARGB connections to the controller or motherboard headers.
  • Ensure any fan control software or BIOS settings are correctly configured.

For more complex issues, consult your component manuals or contact Xigmatek technical support.

9. Specifikationer

10. Garanti og support

Xigmatek products are manufactured to high quality standards. For warranty information, please refer to the warranty card included with your product or visit the official Xigmatek website. For technical support or inquiries, please contact Xigmatek customer service through their official channels.

Officiel Webwebsted: www.xigmatek.com