1. Produktet er slutview
The VTOMAN V3 Pro is a portable and compact car battery jump starter designed to provide reliable power for various vehicles. It also functions as a power bank and an emergency LED light, making it a versatile tool for automotive and outdoor use.
Image: The VTOMAN V3 Pro jump starter unit with its smart jumper cables attached, ready for use.
1.1 Hvad er der i æsken
Image: A visual representation of all items included in the VTOMAN V3 Pro jump starter kit.
- 1 x VTOMAN V3 Pro Car Jump Starter
- 1 x Smart Jumper kabler
- 1 x Type-C USB-opladningskabel
- 1 x bæretaske
- 1 x brugermanual
1.2 Produktdiagram
Image: A detailed diagram highlighting the various ports and features of the VTOMAN V3 Pro jump starter, including the power switch, electricity indicator, 12V jumper cable interface, LED flashlight, Type-C input port, USB output port, and integrated compass.
- Afbryderen: Aktiverer og deaktiverer enheden.
- Electricity Indicator: Viser batteriets aktuelle opladningsniveau.
- 12V Jumper Cable Interface: Port for connecting the smart jumper cables.
- LED lommelygte: Giver belysning med flere tilstande.
- 5V/2A Type-C Input Port: Til opladning af jumpstarterenheden.
- 5V/2.1A USB Output Port: Til opladning af eksterne enheder.
- Integreret kompas: Til navigationshjælp.
2. Sikkerhedsoplysninger
Read all safety information before using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.
2.1 Generelle sikkerhedsforanstaltninger
- Udsæt ikke produktet for regn eller våde forhold.
- Do not operate the product if it has been damaged.
- Opbevares utilgængeligt for børn.
- Sørg for tilstrækkelig ventilation under brug og opladning.
- Kortslut ikke jumperen clamps.
- Tilslut altid den positive (+) polamp to the positive (+) terminal and the negative (-) clamp til den negative (-) terminal.
- Disconnect the jumper cables from the jump starter before disconnecting from the vehicle battery.
2.2 Intelligent Safety Protections
The VTOMAN V3 Pro is equipped with 10 intelligent safety protection technologies to ensure safe operation:
Image: An illustration detailing the 10 intelligent safety protections integrated into the VTOMAN V3 Pro jump starter, including over-charge, reverse-polarity, short-circuit, over-current, AI software, spark-proof, over-load, high and low-temperature, over-voltage, and reverse charge protection.
- Anti-Spark Protection: Prevents sparks during connection.
- Reverse Charging Protection: Protects against current flowing back into the jump starter.
- Overstrømsbeskyttelse: Beskytter mod for høj strøm.
- Overopladningsbeskyttelse: Forhindrer batteriskader forårsaget af overopladning.
- Omvendt polaritetsbeskyttelse: Alerts and protects against incorrect clamp forbindelser.
- Beskyttelse ved høj temperatur: Slukker ned, hvis den indre temperatur overstiger sikre grænser.
- Beskyttelse ved lav temperatur: Ensures safe operation in cold conditions.
- Kortslutningsbeskyttelse: Forhindrer skader fra kortslutninger.
- Overvoltage Beskyttelse: Protects against excessive voltage.
- Overbelastningsbeskyttelse: Prevents damage from drawing too much power.
If the jumper cable indicator shows a red light, it indicates an incorrect connection or a safety issue. Correct the connection before proceeding.
3. Opsætning og opladning
3.1 Indledende opladning
Before first use, fully charge the VTOMAN V3 Pro jump starter. Use the provided Type-C USB cable and a compatible USB wall adapter (not included).
Image: The VTOMAN V3 Pro jump starter connected to a wall adapter via its Type-C USB cable for charging, illustrating the fast charging capability.
- Connect the Type-C cable to the input port on the jump starter.
- Tilslut den anden ende af kablet til en USB-strømkilde.
- The electricity indicator lights will illuminate to show the charging progress.
- En fuld opladning tager cirka 2.6 timer.
4. Betjeningsvejledning
4.1 Jump Starting a Vehicle (Standard Mode)
The VTOMAN V3 Pro can jump start 12V vehicles with up to 6L gasoline or 4L diesel engines. It can operate in temperatures from -4°F to 140°F.
Image: A three-step visual guide demonstrating how to jump start a car: 1. Insert jumper cables into the jump starter. 2. Connect clamps to the car battery (green light indicates correct connection). 3. Start the vehicle.
- Sørg for, at jumpstarteren er tilstrækkeligt opladet.
- Insert the smart jumper cable connector into the 12V jumper cable interface on the jump starter.
- Tilslut rød (+) clamp to the vehicle's positiv (+) batteripol.
- Tilslut sort (-) clamp to the vehicle's negative (-) battery terminal.
- Once connected, the smart cable indicator light should be fast grøn, indicating a correct connection and readiness to jump start. If it's red, check connections.
- Start dit køretøj.
- Once the vehicle starts, immediately remove the jumper cables from the vehicle battery, then disconnect them from the jump starter.
4.2 Jump Starting a Completely Dead Battery (Boost Mode)
If the vehicle battery is completely dead, the smart cable indicator light may be off or flashing green. In this scenario, use the Boost mode.
Image: A four-step visual guide for using Boost Mode: 1. Insert jumper cables. 2. Connect clamps (flashing green light). 3. Press the 'BOOST' button on the smart cable. 4. Start the vehicle.
- Follow steps 1-4 from Section 4.1.
- If the smart cable indicator light is off or flashing green, press the "BOOST" button on the smart cable.
- The indicator light should turn solid green.
- Start dit køretøj inden for 30 sekunder.
- Once the vehicle starts, immediately remove the jumper cables from the vehicle battery, then disconnect them from the jump starter.
4.3 Brug som powerbank
The V3 Pro features a 5V/2.1A USB output port to charge various mobile devices.
Image: The VTOMAN V3 Pro jump starter connected via USB to charge a smartphone, demonstrating its power bank functionality.
- Tilslut din enheds USB-opladerkabel til USB-udgangsporten på jumpstarteren.
- Jumpstarteren vil automatisk begynde at oplade din enhed.
4.4 Using the LED Emergency Light
The integrated LED flashlight has three modes for various situations.
Image: The VTOMAN V3 Pro jump starter's LED flashlight illuminating a dark area, with icons indicating its three modes: normal, strobe, and SOS.
- Press and hold the power button for 3 seconds to turn on the LED light (Normal mode).
- Press the power button once to switch to Strobe mode.
- Tryk på tænd/sluk-knappen igen for at skifte til SOS-tilstand.
- Press the power button once more to turn off the light.
4.5 Compass Function
The V3 Pro includes an integrated compass for basic directional guidance during outdoor activities or emergencies.
5. Vedligeholdelse og opbevaring
Proper maintenance ensures the longevity and performance of your VTOMAN V3 Pro jump starter.
Image: An illustration depicting the 24-month standby time of the VTOMAN V3 Pro jump starter, highlighting its long-term charge retention.
- Opladning: Recharge the unit every 3-6 months, even if not used, to maintain optimal battery health.
- Rensning: Wipe the unit with a dry, soft cloth. Do not use harsh chemicals or abrasives.
- Opbevaring: Store the jump starter in a cool, dry place away from direct sunlight and extreme temperatures. The unit has a 24-month ultra-long standby time and will automatically shut down after 30 seconds of inactivity to conserve power.
- Temperatur: Avoid storing or operating in temperatures outside the recommended range (-4°F to 140°F).
6. Fejlfinding
If you encounter issues with your VTOMAN V3 Pro, refer to the following common problems and solutions.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Køretøjet starter ikke. | Low charge on jump starter, incorrect cable connection, vehicle battery completely dead. | Ensure jump starter is fully charged. Check cable connections (red to positive, black to negative). If battery is completely dead, use Boost Mode (Section 4.2). |
| Smart cable indicator is red. | Reverse polarity, short circuit, or other safety issue. | Afbryd straks clamps. Recheck connections for correct polarity. Ensure clamps are not touching each other or other metal parts. |
| Jumpstarteren oplader ikke. | Faulty Type-C cable or USB adapter, unit malfunction. | Try a different Type-C cable and USB wall adapter. Ensure connections are secure. If issue persists, contact customer support. |
| LED lys virker ikke. | Unit off, low battery. | Ensure the unit is powered on. Check battery level and recharge if necessary. |
7. Specifikationer
Image: The VTOMAN V3 Pro jump starter held in a hand, illustrating its compact size and light weight (0.61 lbs), with dimensions of 5.95 x 3.15 x 1.15 inches.
| Feature | Specifikation |
|---|---|
| Model | V3 Pro |
| Spidsstrøm | 2000 Amps |
| Motorkompatibilitet | Up to 6L Gasoline / 4L Diesel Engines |
| Batteritype | Lithium Polymer (2 batteries included) |
| Input (Type-C) | 5V/2A |
| Udgang (USB) | 5V/2.1A |
| Opladningstid | Cirka 2.6 timer (0-100%) |
| Standby tid | Op til 24 måneder |
| Driftstemperatur | -4°F til 140°F (-20°C til 60°C) |
| Produktdimensioner | 5.95" D x 3.15" B x 1.15" H |
| Varens vægt | 0.61 pund (ca. 9.8 ounces) |
8. Garanti og support
VTOMAN provides comprehensive support for its products.
- Garanti: 18 måneders garanti fra købsdatoen.
- Teknisk support: Livstids teknisk support er tilgængelig.
- Kontakte: For any after-sales questions or technical assistance, please contact VTOMAN customer service. Refer to the product packaging or official VTOMAN webwebsted for kontaktoplysninger.
