1. Introduktion
The LOKITHOR JC400 is a multi-functional automotive emergency tool designed to provide comprehensive support for your vehicle's battery needs. This compact device integrates nine essential functions:
- Bil Jump Starter
- Smart batterioplader
- Batterivedligeholdelse
- Trickle oplader
- Battery Desulfator
- Voltage Registrering
- Bærbar Power Bank
- 6-Mode LED Emergency Light
- Compass (integrated)
This manual provides detailed instructions for the safe and effective use of your LOKITHOR JC400. Please read it thoroughly before operation.
2. Sikkerhedsoplysninger
Always prioritize safety when operating automotive tools. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Læs alle instruktioner: Familiarize yourself with the product's features and operation before use.
- Bær øjenbeskyttelse: Always wear safety glasses when working with batteries.
- Ventilate Area: Ensure adequate ventilation when charging batteries to prevent accumulation of explosive gases.
- Hold dig væk fra børn: Denne enhed er ikke legetøj. Opbevar den utilgængeligt for børn.
- Undgå kortslutninger: Tillad ikke den positive og negative clamps at røre hinanden eller den samme metalgenstand.
- Korrekt forbindelse: Tilslut clamps to the correct battery terminals (positive to positive, negative to negative).
- Integrerede sikkerhedsfunktioner: The JC400 is engineered with an integrated battery management system and smart self-identifying clips that automatically initiate 10 advanced protections, including:
- Gnistfri beskyttelse
- Beskyttelse mod omvendt opladning
- Beskyttelse mod overopladning
- Overstrømsbeskyttelse
- Kortslutningsbeskyttelse
- Beskyttelse mod omvendt polaritet
- Lav temperatur beskyttelse
- Beskyttelse mod høj temperatur
- Over-bindtage Beskyttelse
- Overbelastningsbeskyttelse
- Driftstemperatur: The device is designed to operate in extreme temperatures ranging from -4°F to 140°F (-20°C to 60°C).
3. Pakkens indhold
Verify that all items are present in your LOKITHOR JC400 package:
- LOKITHOR JC400 9-in-1 Car Battery Charger and Jump Starter (x1)
- Jumper Cables with Smart Clamps (x1)
- Netledning (x1)
- USB-A til USB-C-kabel (x1)
- Brugervejledning (x1)
- Opbevaringspose (x1)
Image: Contents of the LOKITHOR JC400 package, showing the main unit, jumper cables, AC power cord, USB-A to USB-C cable, user manual, and a storage bag.
4. Produktet er slutview
The LOKITHOR JC400 features a robust design with an intuitive 4.15-inch display for real-time monitoring of charging status and battery voltage. Below are the key components and controls:
Image: The LOKITHOR JC400 unit, showcasing its digital display, control buttons, and connection ports for jumper cables and charging cables.
Knap Display
Image: Detailed diagram of the LOKITHOR JC400's buttons and their functions: Power Button (turn on/off), LED Light Button (cycle through modes), Force Start Button (long press for 5s), Current Switch Button (0.75A/1A/2A), and Mode Switch Button (switch voltage, force charging, jump start).
- Power knap: Tænder eller slukker for enheden.
- LED lys knap: Cycles through 6 light modes (100% > 50% > 10% > Blink > SOS > Strobe).
- Force Start Button (M): Long press for 5 seconds to enter force start mode for deeply discharged batteries.
- Current Switch Button (A): Selects charging current (0.75A / 1A / 2A) in AC charging mode.
- Mode Switch knap:
- In AC mode: Short press to switch voltage (6V/12V), long press for 5 seconds to enter force charging mode.
- In DC mode: Jump start and 12V mode.
Indikatorlys Display
Image: Detailed diagram of the LOKITHOR JC400's display indicators, including icons for 12V Repair, 12V Mode, 12V AGM, 12V Lithium, 6V Mode, and the ConnectMax Indicator.
- 12V Repair: Indicates repair and restoration of sulfated, old, or damaged 12V batteries.
- 12V tilstand: For 12V normal batteries.
- 12V generalforsamling: Til 12V AGM batterier.
- 12V litium: Til 12V lithium batterier.
- 6V tilstand: For 6V normal batteries.
- ConnectMax Indicator: Indicates LOKITHOR's exclusive technology for optimized jump start performance.
5. Opsætning og første opladning
Before using the LOKITHOR JC400 for the first time, it is recommended to fully charge the device.
- Charge the JC400: Connect the AC Power Cord to the device and plug it into a standard wall outlet. The display will indicate charging status. A full charge ensures optimal performance and readiness for emergencies.
- Tjek batteriniveau: The 4.15-inch display shows the current battery level of the JC400. Ensure it is sufficiently charged before attempting to jump start a vehicle or charge an external battery.
6. Betjeningsvejledning
6.1. Start af et køretøj med startkabler
The LOKITHOR JC400 can jump start 12V vehicles with up to 8.5L gas or 6.5L diesel engines. It features a robust 2500A peak current and automatically detects voltage.
Image: Step-by-step guide for jump starting a vehicle with the LOKITHOR JC400, showing clamp attachment, device activation, mode selection, vehicle start, and power off.
- Attach Jumper Clamps: Tilslut den røde positive (+) clamp til den positive batteripol og den sorte negative (-) polamp til batteriets negative pol. Sørg for en sikker forbindelse.
- Tænd enheden: Press the Power Button on the JC400 to turn it on.
- Vælg tilstand: Short press the Mode Switch Button to ensure it is in the correct 12V jump start mode. The device will automatically detect the battery voltage.
- Start køretøj: Once the display indicates readiness, start your vehicle's engine.
- Sluk: After the vehicle starts, disconnect the clamps from the battery terminals (negative first, then positive) and power off the JC400.
ConnectMax Technology: The JC400 features exclusive ConnectMax technology, which automatically detects impedance between the clamp and the battery. This optimizes starting performance by up to 30%, especially useful when battery terminals have accumulated contaminants (oxidation, rust, oil, dust) that can lead to poor contact.
BOOST Start Function: For completely exhausted batteries (as low as 0V), the JC400 is equipped with a BOOST start function. Refer to the display for instructions on activating this mode if needed.
6.2. Charging an External Battery (Charger, Maintainer, Desulfator)
The JC400 functions as a smart battery charger, maintainer, and desulfator for 6V/12V regular, 12V AGM, and 12V lithium batteries. It offers three optional output currents: 0.75A, 1A, and 2A.
Image: Step-by-step guide for charging an external battery with the LOKITHOR JC400, illustrating AC cord connection, mode selection, current selection, clamp attachment, and charging initiation.
- Plug in AC Cord: Connect the AC Power Cord to the JC400 and then to a wall outlet.
- Vælg opladningstilstand: Short press the Mode Switch Button to cycle through available charging modes (12V REPAIR, 12V, 12V AGM, 12V LITHIUM, 6V). Select the mode appropriate for your battery type.
- Vælg ladestrøm: Press the Current Switch Button to select the desired charging current (0.75A, 1A, or 2A).
- Attach Jumper Clamps: Tilslut den røde positive (+) clamp til den positive batteripol og den sorte negative (-) polamp til den negative batteripol.
- Charging Started: The device will begin charging, and the display will show the charging status and battery voltage.
Force Charging Mode: For batteries as low as 1 volt or completely dead batteries, the Force Charging function can be activated by long-pressing the Mode Switch Button for 5 seconds in AC mode. This allows manual charging to initiate the recovery process.
Image: The LOKITHOR JC400 connected to a battery, demonstrating the Force Charging Mode for dead batteries below 1 Volt. A hand is shown long-pressing the 'MODE' button for 5 seconds to activate this function.
Batterivedligeholder: After a full charge, the JC400 automatically transitions to trickle/float charge mode, maintaining battery health during extended periods of inactivity, such as winter storage.
Battery Desulfator: The device automatically detects and treats battery sulfation and stratification using pulse current technology, which can rejuvenate old or idle batteries and extend their lifespan.
Image: The LOKITHOR JC400 in 12V Repair Mode, connected to a car battery. The image visually represents high-frequency pulse repair technology working to recover battery capacity and extend battery life.
6.3. Brug som en bærbar powerbank
The JC400 includes dual USB ports (USB-A and USB-C) to charge various electronic devices.
Image: The LOKITHOR JC400 acting as a portable power bank, with a smartphone connected and charging. The image highlights the input and output capabilities for charging various devices.
- Tilslut enhed: Use a compatible USB cable (e.g., the included USB-A to USB-C cable) to connect your phone, laptop, camera, or other device to the JC400's USB-A or USB-C port.
- Opladning: The JC400 will automatically begin charging the connected device.
6.4. Using the LED Emergency Light
The integrated 300 lumen LED light provides illumination for various situations.
Image: The LOKITHOR JC400's powerful 300 lumen LED light illuminated, with a list of its six operational modes: 100% brightness, 50% brightness, 10% brightness, Blink, SOS, and Strobe.
- Aktiver lys: Press the LED Light Button to turn on the light.
- Cyklustilstande: Press the LED Light Button repeatedly to cycle through the 6 available modes: 100% brightness, 50% brightness, 10% brightness, Blink, SOS, and Strobe.
- Sluk: Continue pressing the button until the light turns off, or long-press the button.
7. Vedligeholdelse og opbevaring
Proper maintenance ensures the longevity and reliability of your LOKITHOR JC400.
- Rensning: Tør enheden af med en blød, tør klud. Brug ikke skrappe kemikalier eller slibende rengøringsmidler.
- Opbevaring: Store the JC400 in a cool, dry place, away from direct sunlight and moisture. The sturdy shell protects against sun, rain, dust, and drops.
- Genopladning: For optimal performance, recharge the unit every 3-6 months, especially if stored for extended periods. The device has a minimal self-discharge rate of 0.35mAh and an impressive standby time of up to 27 months on a full charge.
- Temperaturovervejelser: The device is designed for use in temperatures from -4°F to 140°F. Avoid storing it in extreme heat or cold for prolonged periods when not in use.
Image: The LOKITHOR JC400 demonstrating its ease of storage and portability, shown being placed in a car's glove compartment, stored in a trunk, and carried in its dedicated storage bag.
8. Fejlfinding
If you encounter issues with your LOKITHOR JC400, refer to the following common troubleshooting steps:
- Enheden tænder ikke: Ensure the device is charged. If the battery is completely depleted, connect it to the AC power cord for a few minutes before attempting to turn it on.
- Køretøjet starter ikke:
- Kontroller at jumperen er låstamper sikkert forbundet til de korrekte batteripoler (rød til positiv, sort til negativ).
- Ensure the JC400 has sufficient charge.
- If the vehicle battery is deeply discharged, try using the BOOST start function (long press 'M' button).
- Verify that the ConnectMax indicator is active, ensuring good contact.
- External Battery Not Charging:
- Confirm the AC power cord is properly connected to both the JC400 and the wall outlet.
- Ensure the correct battery type and voltage mode are selected on the device.
- Tjek klamp connections to the external battery.
- For very low voltage batteries, activate Force Charging Mode.
- Fejlkoder/indikatorer: Refer to the display for any specific error codes or warning indicators. Consult the full user manual (if provided separately) for detailed explanations of these indicators.
If problems persist, please contact LOKITHOR customer support.
9. Specifikationer
| Feature | Specifikation |
|---|---|
| Mærke | LOKITHOR |
| Model | JC400 |
| Peak Output Current | 2500 Amps |
| Motorkompatibilitet | Op til 8.5 l benzin / 6.5 l diesel |
| Batteri Voltage | 6V / 12V |
| Ladestrømme | 0.75A / 1A / 2A |
| Understøttede batterityper | Regular, AGM, Lithium |
| Produktdimensioner | 3.37" D x 6.44" B x 2.72" H |
| Varens vægt | 1.85 pund |
| Driftstemperatur | -4°F til 140°F (-20°C til 60°C) |
| LED lysudgang | 300 Lumens (6 modes) |
| Power Bank output | Dual USB (USB-A, USB-C) |
| Standby tid | Up to 27 months (full charge) |
| UPC | 889551122016 |
10. Garanti og support
LOKITHOR is committed to providing quality products and customer satisfaction.
- Garanti: The LOKITHOR JC400 comes with a 1-årig erstatningsløfte.
- Kundesupport: 24h Service Support is available for any questions or issues you may encounter.
For further assistance, please visit the official LOKITHOR store or contact their customer service department.
LOKITHOR Store: https://www.amazon.com/stores/LOKITHOR/page/9AF3EE2E-2198-4AC7-B194-26D334021FD0
