JONSBO ZA-240B PC Case Fan Instruction Manual

1. Introduktion

This manual provides detailed instructions for the installation, operation, and maintenance of your JONSBO ZA-240B PC Case Fan. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product. The JONSBO ZA-240B is an all-in-one unit featuring two 120mm ARGB fans, designed for efficient cooling and customizable lighting within a PC chassis.

2. Sikkerhedsoplysninger

• Sørg for, at dit computersystem er slukket og taget stikket ud af stikkontakten før installation eller vedligeholdelse.
• Avoid touching the fan blades while the fan is operating.
• Handle the fan unit carefully to prevent damage to components or wiring.
• Do not expose the product to moisture or extreme temperatures.
• Use only compatible power and ARGB connectors as specified. Incorrect connections may cause damage.
• Opbevares utilgængeligt for børn.

3. Pakkens indhold

Bekræft at alle varer er til stede i pakken:

• JONSBO ZA-240B PC Case Fan Unit (with 2x120mm ARGB Fans)
• Monteringsskruer
• Dokumentation (denne manual)

Image: JONSBO ZA-240B fan unit with its integrated cables for power and ARGB connection.

4. Produktfunktioner

• Alt-i-et design: Single frame unit integrating two 120mm ARGB fans, simplifying installation and cable management.
• ARGB Infinity Mirror: Features 4-sides thousand-layer mirror illusion with 52 lamp beads around the circumference and 18 in the axis for dynamic lighting effects.
• Addressable RGB Sync: Direct 3-pin ARGB connection to compatible motherboards for synchronized lighting control and over 16 million color effects.
• PWM kontrol: Quiet and low-noise PWM fan operation with an integrated male/female head for speed regulation.
• Aluminum Nameplate: Includes an aluminum CD pattern nameplate for enhanced aesthetics.
• Simplified Cabling: One-line connection to the motherboard for both fan power and ARGB lighting.

Billede: Forside view of the JONSBO ZA-240B PC Case Fan showcasing its ARGB lighting and infinity mirror effect.

5. Opsætning og installation

Follow these steps to install the JONSBO ZA-240B PC Case Fan into your computer chassis:

1. Forbered dit system: Power off your computer and unplug it from the power outlet. Open your PC case to access the interior.
2. Identificér monteringssted: Determine the desired mounting location for the fan unit (e.g., top, front, bottom, or side of the case). Ensure there is sufficient clearance.
3. Secure the Fan Unit: Align the fan unit with the screw holes in your PC case. Use the provided mounting screws to firmly attach the fan unit to the chassis. Do not overtighten.


Image: JONSBO ZA-240B fan unit installed at the top of a PC case, demonstrating typical mounting.

4. Tilslut PWM-kabel: Locate an available 4-pin PWM fan header on your motherboard. Connect the 4-pin PWM connector from the fan unit to this header. This allows the motherboard to control fan speed.
5. Tilslut ARGB-kablet: Locate an available 3-pin 5V Addressable RGB header on your motherboard. Connect the 3-pin ARGB connector from the fan unit to this header. Ensure the arrow on the connector aligns with the +5V pin on the motherboard header to prevent damage. Må ikke tilsluttes en 12V RGB-header.
6. Kabelstyring: Route the cables neatly to avoid interference with other components and to improve airflow.
7. Luk kassen og tænd: Once all connections are secure, close your PC case, plug in the power cable, and power on your system.

6. Betjening

Fan Speed Control (PWM)

The JONSBO ZA-240B fan unit utilizes Pulse Width Modulation (PWM) technology, allowing your motherboard to dynamically adjust fan speeds based on system temperature. This ensures optimal cooling performance while minimizing noise levels. You can configure fan curves through your motherboard's BIOS/UEFI settings or using compatible software provided by your motherboard manufacturer.

ARGB-lysstyring

The Addressable RGB (ARGB) lighting of the ZA-240B can be controlled via your motherboard's ARGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion, ASRock Polychrome Sync). Ensure your motherboard supports 3-pin 5V ARGB headers. This software allows you to customize lighting effects, colors, and synchronization with other ARGB components in your system.

Image: The JONSBO ZA-240B fan unit displaying its customizable ARGB lighting within a computer system.

7. Vedligeholdelse

Regular maintenance helps ensure optimal performance and extends the lifespan of your fan unit.

• Fjernelse af støv: Periodically clean dust from the fan blades and frame using compressed air or a soft brush. Ensure the system is powered off and unplugged before cleaning.
• Inspektion: Occasionally inspect the fan and its cables for any signs of wear, damage, or loose connections.

8. Fejlfinding

9. Specifikationer

10. Garanti og support

For warranty information and technical support, please refer to the official JONSBO webwebstedet eller kontakt din forhandler. Gem din købsbevis til garantikrav.