Indledning
Tak for købetasing the BESIGN BK06 and BK03 Bluetooth Car Kit. This manual provides detailed instructions for the proper installation, operation, and maintenance of your device. Please read this manual thoroughly before use to ensure optimal performance and safety.
The BESIGN BK06 is a versatile Bluetooth speakerphone designed for hands-free communication and audio streaming in your vehicle. The BESIGN BK03 is a compact Bluetooth remote control and receiver, offering convenient control over your calls and music.
Sikkerhedsoplysninger
Af hensyn til din sikkerhed og for at forhindre skader på enheden, bedes du overholde følgende forholdsregler:
- Forholdsregler for batterihåndtering: Do not expose the device to extreme temperatures, direct sunlight, or open flames. Do not disassemble or puncture the battery. Dispose of batteries according to local regulations.
- Potentiel interferens: This device operates using radio frequencies and may cause interference with other electronic devices, including medical devices. Maintain a safe distance from such devices.
- Korrekt bortskaffelse: At the end of its life cycle, dispose of this product responsibly at designated collection points for electronic waste. Do not dispose of with household waste.
- Do not operate the device while driving if it distracts you from safe driving. Always prioritize road safety.
- Hold enheden væk fra vand og andre væsker.
- Clean the device with a soft, dry cloth only.
Pakkens indhold
Tjek venligst pakken for følgende varer:
- BESIGN BK06 Bluetooth Speakerphone
- BESIGN BK03 Bluetooth Remote Control/Receiver
- USB Charging Cable (for BK03)
- Auxiliary Out Cable (3.5mm audio cable for BK03)
- Car Cigarette Lighter USB Charger
- Visor Clip (pre-attached to BK06)
- Air Vent Clip (for BK03)
- Adhesive Sticker (for BK03)
- Ground Loop Noise Isolator (for BK03)
- Brugervejledning (dette dokument)
Billede: Overview of the BESIGN BK06 speakerphone and the BK03 remote control with its accessories, including cables and charging adapter.
Image: Detailed diagram of the BESIGN BK03 Car Kit components, showing the remote control, USB charging cable, auxiliary out cable, air vent clip, and adhesive sticker with their approximate lengths.
Produktegenskaber
- Håndfri opkald: Make and receive calls safely while driving.
- Premium lydkvalitet: Built-in dual 2W speakers for clear audio.
- Motion Sensor Auto Power On/Off: The BK06 automatically powers on when you open the car door and turns off when you close it.
- Automatisk genopret forbindelse: Automatically connects to the last paired device.
- Musikstreaming: Stream audio from your Bluetooth-enabled device.
- Støjreduktion: Reducerer baggrundsstøj for klarere opkald.
- GPS Instruction Support: Hear navigation prompts through the speaker.
- Voice Command/Siri Support: Activate your phone's voice assistant.
- Ground Loop Noise Isolator: Included with BK03 to eliminate buzzing noise when playing music via AUX.
Image: Close-up of the BESIGN BK06 speakerphone highlighting its dual 2W speakers for premium sound quality.
Image: Illustration showing the BESIGN BK06 mounted on a car visor, demonstrating its built-in motion sensor that automatically powers the device on when the car door is opened.
Image: A driver in a car, with icons representing the key functions of the car kit: music playback, noise cancellation, hands-free phone calls, and incoming call alerts.
Image: The BESIGN BK06 speakerphone next to a smartphone displaying a GPS navigation map, illustrating the device's ability to support GPS instructions.
Opsætning og installation
Installing the BESIGN BK06 Speakerphone
- Attach the BK06 to your car's sun visor using the integrated clip. Ensure it is securely fastened and does not obstruct your view.
- Slide the power switch on the side of the BK06 to the "ON" position. The device will automatically power on when you open the car door and power off when you close it.
Installing the BESIGN BK03 Remote Control
The BK03 can be installed in two ways:
- Using the Air Vent Clip: Attach the BK03 to a suitable air vent in your car using the provided clip.
- Using the Adhesive Sticker: Clean the desired surface on your dashboard or console. Peel off the protective film from the adhesive sticker and firmly press the BK03 onto the surface.
Connect the BK03 to your car's audio system via the 3.5mm Auxiliary Out Cable if you wish to stream audio through your car speakers. If you experience buzzing noise, connect the included Ground Loop Noise Isolator between the BK03 and your car's AUX input.
Image: The BESIGN BK03 remote control installed in a car, connected to the car's audio system via AUX, demonstrating the use of the Ground Loop Noise Isolator to eliminate buzzing sounds.
Parring med din telefon
- Ensure both the BK06 and BK03 are powered on.
- Aktiver Bluetooth på din smartphone, og søg efter tilgængelige enheder.
- Select "BESIGN BK06" or "BESIGN BK03" from the list of devices.
- Once connected, the device will indicate successful pairing (e.g., a voice prompt or LED indicator change).
- The devices will automatically reconnect to your phone when in range and powered on.
Betjeningsvejledning
BESIGN BK06 Speakerphone Operation
- Tænd/sluk: Use the side switch. The motion sensor will manage daily power cycles when the switch is ON.
- Lydstyrkekontrol: Use the '+' and '-' buttons on the BK06 to adjust speaker volume.
- Mikrofon mute: Press the microphone button to mute/unmute during a call.
- Opkaldshåndtering: The green button answers calls, the red button ends calls.
BESIGN BK03 Remote Control Operation
The BK03 provides convenient control for calls and music. Refer to the diagram below for button identification.
Image: Detailed guide to the BESIGN BK03 remote control buttons and their corresponding functions for call management and music control.
| Fungere | Handling |
|---|---|
| Besvar opkald: | Press the blue button once. |
| Afslut opkald: | Press the red button once. |
| Afvis opkald: | Press the red button once. |
| Genopkald sidste nummer: | Double press the blue button. |
| Mute & Un-mute call: | Press and hold the Previous Track button for 2 seconds. |
| Transfer Call (BK03 to Phone or Vice Versa): | Tryk og hold den blå knap nede i 1.5 sekunder. |
| Siri or Voice Command: | In standby mode, press & hold the blue button for 2 seconds. |
| Two Phones Switching: | During a call, Double Press the blue button to switch between two mobile phones. |
| Music Pause/Resume: | Press the blue button once. |
| Forrige nummer: | Press the Previous Track button (triangle up) once. |
| Næste nummer: | Press the Next Track button (triangle down) once. |
Fejlfinding
If you encounter issues with your BESIGN Bluetooth Car Kit, please refer to the following common solutions:
- Enheden tænder ikke: Ensure the BK06 side switch is in the "ON" position. Check if the BK03 is charged.
- Kan ikke parres med telefon:
- Sørg for, at Bluetooth er aktiveret på din telefon.
- Make sure the device is in pairing mode (usually indicated by a flashing LED).
- Delete previous pairings from your phone's Bluetooth list and try pairing again.
- Restart both your phone and the car kit.
- No audio or low volume:
- Check the volume levels on both the car kit and your phone.
- Ensure the BK03's AUX cable is securely connected to your car's AUX input.
- If using the BK03 with AUX, ensure the Ground Loop Noise Isolator is correctly installed if experiencing buzzing.
- Buzzing or static noise (BK03 AUX connection): Use the included Ground Loop Noise Isolator. Connect it between the BK03's 3.5mm output and your car's 3.5mm AUX input.
- Motion sensor not working (BK06): Ensure the BK06 is securely mounted on the sun visor and the power switch is ON. The sensor detects movement to activate.
Specifikationer
| Feature | Detalje |
|---|---|
| Mærke: | BESIGN |
| Modeller: | BK06, BK03 |
| Forbindelse teknologi: | Bluetooth, AUX |
| Standard for trådløs kommunikation: | Bluetooth |
| Farve: | Sort |
| Strømkilde: | Car Cigarette Lighter (via included adapter), Internal Battery |
| Speaker Output (BK06): | Dobbelte 2W højtalere |
| Særlige funktioner: | Motion Sensor Auto Power On/Off (BK06), Noise Cancellation, GPS Instruction Support, Voice Command/Siri Support, Ground Loop Noise Isolator (BK03) |
Opretholdelse
To ensure the longevity and optimal performance of your BESIGN Bluetooth Car Kit, follow these maintenance guidelines:
- Rensning: Use a soft, dry, lint-free cloth to clean the device. Do not use abrasive cleaners, solvents, or strong chemicals, as they may damage the surface or internal components.
- Opbevaring: Når enheden ikke er i brug i længere perioder, skal den opbevares køligt og tørt, væk fra direkte sollys og ekstreme temperaturer.
- Batteripleje: For devices with internal rechargeable batteries (like BK06), avoid fully discharging the battery frequently. Charge the device regularly, even if not in constant use, to maintain battery health.
- Undgå fysisk skade: Do not drop, hit, or expose the device to strong impacts.
Garanti og support
BESIGN products are designed for reliability and performance. For warranty information and customer support, please refer to the documentation included with your purchase or visit the official BESIGN website. If you experience any issues not covered in this manual, please contact BESIGN customer service for assistance.
Returpolitik: The product has a 30-day refund/replacement policy from the date of purchase.
Fabrikant: BESIGN
