OWON Lab Strømforsyning SPE8105 Brugermanual

1. Introduktion

This manual provides comprehensive instructions for the safe and effective use of the OWON SPE8105 Programmable DC Power Supply. It covers product features, component identification, setup procedures, operating instructions, maintenance guidelines, troubleshooting tips, and detailed technical specifications. Please read this manual thoroughly before operating the device to ensure proper functionality and safety.

Figure 1: OWON SPE8105 Lab Power Supply and included accessories (power cord, USB cable).

2. Produktet er slutview

2.1 Nøglefunktioner

• Multiinformationsdisplay: A 2.8-inch TFT LCD simultaneously displays set and actual voltage, current, output power, cumulative runtime, and channel status. It automatically switches to Constant Current (CC) mode if the actual current exceeds the preset value.
• Flere beskyttelsesfunktioner: Includes current limit, thermal, voltage overload (OVP), short circuit, and overpower protection to enhance durability and longevity.
• Praktisk USB-portdesign: Features a 5V/1A USB output port for charging mobile devices and a rear USB communication port for firmware updates and PC software control.
• Adjustable Power Supply: Constant power design with a wide application range, allowing flexible configuration of higher voltage and current within the rated power. Programmable with four groups of shortcut parameters and supports waveform editing and editable timing output for up to ten groups.
• Kompakt og let: Measures 3.2 x 8.9 x 5.6 inches and weighs 3.3 pounds, optimizing workbench space and portability.

2.2 Frontpanelets komponenter

Figure 2: Front and Rear Panel Layout of the OWON SPE8105.

1. 2.8-tommer LCD-skærm: Displays operational parameters and settings.
2. Current Setting Button: Used to adjust current parameters.
3. Overcurrent Protection Setting (OCP): Configures overcurrent protection limits.
4. Justeringsknap: Rotary encoder for parameter adjustment.
5. Channel Output On/Off Button: Activates or deactivates the output. Long press for automatic output function.
6. Channel Output Terminals: Connect positive (red), negative (black), and ground (green) leads.
7. Shortcut Output Button (Memory): Accesses stored parameters. Long press to enter the List waveform timing output interface.
8. Display knap: Toggles display modes or information.
9. Overvoltage Protection Setting (OVP): Configures overvoltage beskyttelsesgrænser.
10. Voltage Setting Button (V): Used to adjust voltage parametre.

2.3 Bagpanelkomponenter

• Intelligent Temperature Control Fan: Provides cooling for the unit.
• Sikring: Overcurrent protection for the input power.
• Afbryderen: Tænder eller slukker for enheden.
• USB Device Communication Port: For PC software control and firmware updates.
• Power Cord Socket: Connects the power supply to the AC mains.

3. Opsætning

1. Udpakning: Carefully remove the power supply and all accessories from the packaging. Verify that all components listed in the package contents are present.
2. Placering: Place the power supply on a stable, level surface with adequate ventilation. Ensure that the fan vents on the rear panel are not obstructed.
3. Strømtilslutning: Connect the provided power cord to the power cord socket on the rear panel of the device, then plug the other end into a grounded AC power outlet (100-240V AC).
4. Udgangsforbindelser: Connect your load to the output terminals on the front panel. Ensure correct polarity: red for positive (+), black for negative (-), and green for ground.

4. Betjeningsvejledning

4.1 Tænd/sluk

• To power on, press the power switch on the rear panel to the 'ON' position. The LCD will illuminate.
• To power off, press the power switch on the rear panel to the 'OFF' position.

4.2 Indstilling Voltage og Nuværende

Figur 3: Detaljeret view of the 2.8-inch IPS LCD display.

• Press the 'V' button to select voltage adjustment. Rotate the adjustment knob to set the desired voltage.
• Press the 'I' button to select current adjustment. Rotate the adjustment knob to set the desired current limit.
• The display shows set values (Set) and actual output values.

4.3 Output Enable/Disable

• Press the 'On/Off' button to enable or disable the output to the connected load. The 'ON' or 'OFF' indicator on the display will change accordingly.
• A long press of the 'On/Off' button may activate an automatic output function, if configured.

4.4 Protection Functions (OVP/OCP)

• Overvoltage-beskyttelse (OVP): Press the 'OVP' button to set the maximum allowable output voltage. Hvis output voltage exceeds this limit, the power supply will shut down the output to protect the load.
• Overstrømsbeskyttelse (OCP): Press the 'OCP' button to set the maximum allowable output current. If the output current exceeds this limit, the power supply will switch to CC mode or shut down the output.

4.5 Hukommelsesfunktion

• The 'Memory' button allows you to store and recall up to four groups of frequently used voltage og aktuelle indstillinger.
• A long press on the 'Memory' button will enter the List waveform timing output interface for advanced programming.

4.6 USB-portbrug

• The front 5V/1A USB port can be used to charge compatible mobile devices.
• The rear USB communication port allows connection to a PC for software control and firmware updates. Refer to the OWON website for compatible software and update procedures.

5. Vedligeholdelse

• Rensning: Disconnect the power supply from the AC mains before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use abrasive cleaners or solvents.
• Ventilation: Ensure that the ventilation openings are kept clear of dust and debris to prevent overheating.
• Udskiftning af sikring: If the fuse blows, disconnect the power cord and replace it with a fuse of the same type and rating (refer to specifications).
• Opbevaring: When not in use for extended periods, store the power supply in a dry, dust-free environment.

6. Fejlfinding

• Ingen strøm: Check the power cord connection and ensure the power switch is in the 'ON' position. Verify the AC outlet is functional and check the fuse on the rear panel.
• Intet output: Ensure the output is enabled using the 'On/Off' button. Check for active OVP or OCP conditions that might have shut down the output. Verify connections to the load.
• Forkert output: Bekræft bindtage and current settings. Ensure the load is connected correctly and is within the power supply's operating range.
• Overophedning: Ensure adequate ventilation around the unit. Clear any obstructions from the fan vents. Reduce the load if operating continuously at high power.
• For persistent issues, refer to the detailed troubleshooting guide on the OWON support webwebsted eller kontakt kundeservice.

7. Specifikationer

Figure 4: OWON SPE8105 Product Specifications.

Note: The instrument must be operated continuously for more than 30 minutes at the specified operating temperature to achieve the following specifications. Ripple & Noise bandwidth 20MHz, ripple bandwidth 1MHz, connect 10uF electrolytic capacitor in parallel with 0.1uF ceramic capacitor to the output terminal for testing.

Figure 5: OWON SPE8105 dimensions and internal component layout.

8. Garanti og support

OWON products are designed for reliability and performance. For warranty information, technical support, or service, please contact your local distributor or visit the official OWON webwebsted. Behold din købskvittering som købsbevis i tilfælde af garantikrav.

Manufacturer: ZHANGZHOU LILLIPUT ELECTRONIC TECHNOLOGY CO.,LTD.