BFT Cool C2 Garage Door Remote Control User Manual

1. Produktet er slutview

The BFT Cool C2 is an original BFT brand remote control designed for garage door systems. It is engineered for reliability and ease of use, providing secure access to your garage. This remote control is specifically compatible with BFT receivers and is not a copy or universal remote for other brands.

The BFT Cool C2 replaces older models such as the BFT RCB02, ensuring seamless integration with existing BFT installations.

This image illustrates the design transition from an older BFT remote model to the BFT Cool C2. The new model offers updated aesthetics and functionality.

The BFT Cool C2 remote control is designed to replace the older BFT RCB02 model, ensuring continued compatibility with existing BFT systems.

2. Vigtige sikkerhedsinstruktioner

ADVARSEL: Kemisk forbrændingsfare. This product contains a button cell battery. If swallowed, it can cause severe internal burns in as little as 2 hours and can lead to death. Keep new and used batteries away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

Always dispose of used batteries responsibly according to local regulations. Do not incinerate or expose batteries to high temperatures.

This image contains critical safety information, including a warning about chemical burn hazards if batteries are swallowed. It also illustrates the correct method for replacing the CR2032 battery, emphasizing proper polarity and avoiding metal objects. Technical specifications like frequency (433.92MHz) and range (50/100m) are also visible.

3. Opsætning og programmering

The BFT Cool C2 remote control offers multiple programming methods for convenience. Ensure your BFT receiver is in programming mode as per its specific instructions before proceeding.

3.1. Method 1: Replay Function (Cloning from an existing remote)

The integrated 'Replay' function allows for easy cloning of an existing BFT remote control. This method is quick and can often be performed remotely.

1. Ensure both the old (working) remote and the new BFT Cool C2 remote are within close proximity.
2. Activate the 'Replay' function on the new remote (refer to the diagram for specific button presses).
3. Transmit the code from the old remote to the new remote (refer to the diagram for specific button presses).
4. Confirm successful programming by testing the new remote with your garage door system.

3.2. Method 2: Programming via Application (U-LINK)

Programming the remote control into a BFT receiver can be done using a dedicated application. This allows for remote insertion and programming without needing to be physically near the receiver, saving time.

1. Access the BFT programming application on your device.
2. Follow the in-app instructions to add a new remote control.
3. The application will guide you through the process of linking the BFT Cool C2 to your receiver.

3.3. Method 3: ER-Ready System (QR Code Programming)

For certain BFT transmitters, a new programming procedure is available using the ER-Ready system, which involves reading a QR code.

1. Locate the QR code on your BFT Cool C2 remote control or its packaging.
2. Use a compatible device (e.g., smartphone with a QR scanner app) to scan the QR code.
3. Follow the on-screen instructions provided after scanning to complete the programming.

This diagram provides visual instructions for copying and programming BFT remote controls. It shows how to transfer codes from an old remote to a new BFT Cool C2 using the 'Replay' function, and also demonstrates programming via U-LINK.

The ER-Ready system allows for a new programming procedure for BFT transmitters. This involves reading a QR code, typically found on the device or packaging, to facilitate quick and efficient setup.

4. Betjening

The BFT Cool C2 remote control features three buttons for operating your garage door. Once programmed, simply press the corresponding button to activate your garage door opener. The remote utilizes radio frequency technology with an encrypted variable code system for secure transmission.

5. Vedligeholdelse

5.1. Udskiftning af batteri

The BFT Cool C2 remote control is powered by a 3V Lithium CR2032 button cell battery. The battery is not included with the remote and must be purchased separately.

1. Åbn forsigtigt fjernbetjeningen casing. Refer to the safety diagram for visual guidance.
2. Remove the old CR2032 battery. Avoid using metal objects that could short-circuit the battery.
3. Isæt et nyt 3V CR2032-batteri, og sørg for at polariteten vender korrekt (+ siden opad).
4. Luk fjernbetjeningen casing sikkert.
5. Test fjernbetjeningen for at sikre korrekt funktion.

Always dispose of old batteries responsibly at designated collection points.

6. Fejlfinding

• Fjernbetjeningen svarer ikke: Check the battery. Ensure it is correctly inserted and has sufficient charge.
• Begrænset rækkevidde: Replace the battery. Ensure there are no obstructions between the remote and the receiver. Check for sources of radio interference.
• Programmeringsproblemer: Verify that your BFT receiver is in programming mode. Ensure you are following the correct programming steps for your specific receiver and remote model. Confirm the remote is compatible only with BFT receivers.
• Indikatorlys virker ikke: This usually indicates a depleted battery or a fault with the remote. Try replacing the battery first.

7. Tekniske specifikationer

• Mærke: BFT
• Model: BFT COOL 2
• Dimensioner: 5 x 3 x 2 cm (approximately 66 x 31 x 13 mm as per diagram)
• Vægt: 40 g
• Batteritype: 3V Lithium CR2032 (not included)
• Antal knapper: 3
• Forbindelse teknologi: Radiofrekvens
• Driftsfrekvens: 433.92 MHz
• Frekvens båndbredde: 20 kHz
• Output Power (P): -1.9 dBm
• Driftsområde: 50 - 100 meters (depending on environmental conditions)
• Kompatible enheder: BFT Garage Door Openers/Receivers
• Product Barcode (EAN): 8027908772695

This image highlights the compact and lightweight design of the BFT Cool C2 remote. A technical drawing provides precise dimensions: 66mm length, 31mm width, and 13mm thickness.

8. Pakkens indhold

• BFT Cool C2 Remote Control
• Instruktionsmanual

Note: The 3V CR2032 battery is not included and must be purchased separately.

The BFT Cool C2 remote control is presented alongside its retail packaging, which clearly indicates the model name 'MITTO COOL C2'.

The product packaging displays an internal code (D112306), a QR code, and a barcode (8027908772695), which are used for product identification and potentially for programming.

9. Garanti og support

For warranty information and technical support, please refer to the official BFT website or contact your authorized BFT dealer. Keep your purchase receipt as proof of purchase.

Fabrikantens kontaktoplysninger:
BFT Spa - Via Lago di Vico, 44, 36015 Schio (VI) ITALY
BFT Automation UK Ltd - Units C2-C3 The Embankment BP Vale Rd - Stockport SK4 3GL
Webwebsted: www.bft-automation.com