1. Introduktion
This manual provides essential information for the safe and effective use of your GT POWER AC/DC Power Adapter, Model 112. This charger is specifically designed to be compatible with the Soundcore Rave PartyCast Bluetooth Speaker A3390.
Hvad er der i æsken
- 1 x GT POWER AC-adapter (model 112)
Image 1.1: The GT POWER AC Adapter, Model 112, featuring its compact design and integrated power cord.
2. Sikkerhedsoplysninger
Læs venligst alle sikkerhedsinstruktioner omhyggeligt, inden du bruger dette produkt. Manglende overholdelse af disse instruktioner kan resultere i elektrisk stød, brand eller andre farer.
- Kun indendørs brug: This power adapter is designed for indoor use only. Do not expose it to rain, moisture, or extreme temperatures.
- Proper Voltage: Sørg for, at input voltage of the power outlet matches the adapter's specifications (110 Volts AC).
- Beskyttelsesfunktioner: This adapter is equipped with Over Voltage Protection (OVP), Over Current Output Protection (OCP), and Short Circuit Output Protection (SCP) to ensure safe operation.
- Undgå skader: Do not use the adapter if the cord or plug is damaged. Do not attempt to open or repair the adapter.
- Hold dig væk fra børn: Opbevar adapteren utilgængeligt for børn.
Billede 2.1: Nærbillede view of the GT POWER AC Adapter's label, indicating "CAUTION INDOOR USE ONLY" and electrical specifications.
3. Opsætning
Follow these steps to properly set up your GT POWER AC Adapter for charging your Soundcore Rave PartyCast Bluetooth Speaker A3390.
- Bekræft kompatibilitet: Before connecting, ensure your speaker is the Soundcore Rave PartyCast Bluetooth Speaker A3390. This charger is specifically designed for this model.
- Tilslut til højttaler: Locate the charging port on your Soundcore Rave PartyCast Bluetooth Speaker A3390. Insert the barrel plug connector of the GT POWER AC Adapter firmly into the speaker's charging port.
- Tilslut til stikkontakten: Plug the AC prongs of the adapter into a standard 110V AC wall outlet.
- Bekræft forbindelse: Ensure both connections are secure. The speaker should indicate that it is receiving power or charging (refer to your speaker's manual for specific charging indicators).
Image 3.1: Close-up of the barrel plug connector, which connects to the speaker's charging port.
Billede 3.2: Top-down view of the GT POWER AC Adapter, showing the AC prongs and the integrated cable leading to the barrel plug.
4. Betjeningsvejledning
Once the adapter is properly connected, the Soundcore Rave PartyCast Bluetooth Speaker A3390 will begin charging. The charging process is automatic.
- Opladningsindikation: Refer to your Soundcore speaker's user manual for information on its charging indicator lights or display. Typically, a light will illuminate or change color to indicate charging status.
- Opladningstid: Charging time will vary depending on the speaker's battery level and usage.
- Afbrydelse: Once the speaker is fully charged, you may disconnect the adapter from both the speaker and the wall outlet.
5. Vedligeholdelse
Proper care and maintenance will extend the life of your GT POWER AC Adapter.
- Rensning: Disconnect the adapter from the power source before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
- Opbevaring: Når adapteren ikke er i brug, skal den opbevares køligt og tørt, væk fra direkte sollys og fugt. Undgå at vikle kablet stramt op for at forhindre skader.
- Kabelpleje: Undgå at bøje, vride eller trække for meget i kablet. Undgå at placere tunge genstande på kablet.
Image 5.1: The power cable of the GT POWER AC Adapter, shown coiled for storage. Avoid tight coiling to prevent damage.
6. Fejlfinding
If you encounter issues with your GT POWER AC Adapter, refer to the following common troubleshooting steps:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Højttaleren oplader ikke |
|
|
| Langsom opladning |
|
|
If the problem persists after trying these steps, please refer to the Warranty and Support section.
7. Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | 112 |
| Mærke | GT POWER |
| Input bindtage | 110 volt (AC) |
| Udgangsstrøm | 3 Amps |
| Wattage | 33 watt |
| Connector Type | Tøndeprop |
| Kompatible enheder | Soundcore Rave PartyCast Bluetooth Speaker A3390 |
| Særlige funktioner | Over Voltage-beskyttelse (OVP), overstrømsudgangsbeskyttelse (OCP), kortslutningsudgangsbeskyttelse (SCP) |
8. Garanti og support
GT POWER stands behind the quality of its products.
- Penge-tilbage-garanti: This product comes with a 30-day money-back guarantee.
- Garanti: En etårig garanti dækker materiale- og fabrikationsfejl fra købsdatoen.
- Kontakt support: For warranty claims, technical assistance, or further inquiries, please contact GT POWER customer support. Refer to the product packaging or the retailer's webwebsted for kontaktoplysninger.
