1. Produktet er slutview
This document provides instructions for the installation and operation of the MPC Remote Start Kit for Kia Sorento vehicles manufactured between 2016 and 2020. This kit is designed for vehicles with push-start ignition systems only and is not compatible with key-start cars or hybrid models. It includes all necessary components for a plug-and-play installation.
Image 1.1: The MPC Remote Start Kit, showing the main module, two 4-button remotes, and the T-Harness, alongside a Kia Sorento.
1.1. Kitets indhold
- Fjernstartermodul
- Data Interface Bypass Module (preloaded with firmware)
- T-Harness for plug-and-play connection
- Two (2) extended range 4-Button 1-Way Transmitters
- RFA2A antenneadapter
- Antenna and Antenna Cable
Important: This kit does not include any OEM key fob or OEM remote.
2. Vehicle Compatibility and Requirements
This remote start kit is specifically designed for Kia Sorento models from 2016 to 2020. It is crucial to verify your vehicle's ignition type before installation.
- Kompatibel: Vehicles with a "Push-Start" ignition button.
- Ikke kompatibel: Vehicles with a traditional key-start ignition.
- Ikke kompatibel: Hybrid models.
- Produktet fungerer muligvis ikke i køretøjer, der er fremstillet til salg uden for USA og Canada.
Image 2.1: Visual guide indicating compatibility with push-start ignition and incompatibility with key-start ignition and hybrid vehicles.
3. Installationsvejledning
The MPC Remote Start Kit features a plug-and-play T-Harness design, significantly simplifying the installation process by reducing the number of required wiring connections. While the primary installation is plug-in, adding certain optional features may require additional wiring.
Image 3.1: An illustration depicting the ease of installation for this kit, indicating it is on the "Easier" side of the spectrum.
3.1. Generelle installationstrin (resumé)
- Forberedelse: Ensure the vehicle is turned off and the battery is disconnected for safety.
- Adgang til køretøjets ledningsføring: Locate the necessary connection points within your vehicle, typically behind the dashboard or steering column.
- Connect T-sele: Connect the provided T-Harness to the vehicle's existing wiring harnesses. The design minimizes direct wire splicing.
- Modultilslutning: Connect the remote starter module and data interface bypass module to the T-Harness.
- Antenne installation: Install the RFA2A antenna and route its cable to the remote start module.
- Programmering: The firmware is preloaded; however, the system will need to be programmed to your specific vehicle following the detailed instructions provided via the MPC technical support link.
- Test: Tilslut batteriet igen, og test fjernstartsystemet grundigt, før du samler bilens interiør igen.
For detailed, step-by-step instructions with specific plug locations, please refer to the exclusive copyrighted installation tip sheet available through MPC's technical support resources. A person with basic knowledge of car electronics wiring should be able to install this product successfully.
Image 3.2: A yellow plastic pry tool, often useful for safely removing interior trim during installation.
4. Betjeningsvejledning
The MPC Remote Start Kit allows you to start or stop your vehicle's engine from a distance using the provided 4-button remotes. The operational range is up to 2,800 feet.
4.1. Remote Start/Stop Function
- Til starte the engine: Press the dedicated remote start button on your 4-button transmitter.
- Til stop the engine: Press the dedicated remote start button again.
4.2. Yderligere funktioner
Depending on your vehicle and the data module coverage, the system may also support the following functions via the remote:
- Lock and Unlock doors
- Trunk or back hatch release
- AUX channel activation (for additional accessories, if configured)
Billede 4.1: Eks.amples of various OEM factory remotes. Note that this kit does not include an OEM remote, but works alongside your existing one.
5. Vedligeholdelse
The MPC Remote Start Kit is designed for long-term reliability and typically requires minimal maintenance. Key considerations include:
- Ekstern udskiftning af batteri: If the range of your remote transmitters decreases significantly, it may be time to replace the batteries. Refer to the remote's specific instructions for battery type and replacement procedure.
- Systemopdateringer: While firmware is preloaded, occasional updates may be available for enhanced performance or compatibility. Check the MPC technical support website for any announcements.
- Fysisk inspektion: Periodically inspect the wiring and module connections to ensure they remain secure and free from damage.
6. Fejlfinding
Hvis du støder på problemer med dit fjernstartsystem, kan du overveje følgende almindelige fejlfindingstrin:
- Intet svar fra fjernbetjeningen:
- Tjek fjernbetjeningens batteri.
- Ensure you are within the operational range (up to 2,800 feet). Obstacles like buildings or other vehicles can reduce range.
- Vehicle Does Not Start:
- Verify vehicle compatibility (push-start, non-hybrid).
- Ensure all vehicle doors, hood, and trunk are fully closed.
- Kontroller om køretøjets batteri er tilstrækkeligt opladet.
- Confirm proper installation and secure connections of the T-Harness and modules.
- Intermitterende drift:
- Kontroller for kilder til radiointerferens.
- Ensure the antenna is properly positioned and connected.
Hvis disse trin ikke løser problemet, bedes du kontakte MPC's tekniske support for yderligere assistance.
7. Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | B-6117-315 |
| Produktdimensioner | 8 x 8 x 3 tommer |
| Varens vægt | 3 pund |
| Fabrikant | MPC-produkter |
| Fjern rækkevidde | Op til 2,800 fod |
| Ignition Type Compatibility | Push-Start Only |
| Køretøjskompatibilitet | Kia Sorento 2016-2020 |
8. Garantioplysninger
Specific warranty details for the MPC Remote Start Kit are not provided in this manual. For information regarding product warranty, please refer to the documentation included with your purchase or contact MPC Technical Support directly.
9. Teknisk support
MPC offers dedicated technical support to assist with installation and any questions you may have about your remote start system. Support is U.S. based and available during specified hours.
- Support åbningstider: Monday through Friday, 9:00 AM to 7:00 PM Eastern Time.
- Ark med installationstips: A link to download MPC's exclusive copyrighted step-by-step installation tip sheet, created by professional technicians, is provided to help guide you through the installation process.
Image 9.1: MPC provides free expert technical support to assist users.
For at få hjælp, se venligst de kontaktoplysninger, der følger med dit produkt, eller besøg den officielle MPC webwebsted.
