Indledning
This manual provides essential information for the safe installation, operation, and maintenance of your Origin21 LED Vanity Bar with Motion Sensing Night Light. Please read this manual thoroughly before installation and retain it for future reference.
The LED Vanity Bar features a matte black finish with a white acrylic shade, integrated LED lighting, motion sensing capabilities, adjustable white light (2700K-6500K), and continuous dimming from 10% to 100%.
Vigtige sikkerhedsoplysninger
- Sluk altid for hovedstrømforsyningen ved afbryderen, før du påbegynder installation eller udfører vedligeholdelse.
- Installationen skal udføres af en kvalificeret elektriker eller i overensstemmelse med lokale el-forskrifter.
- Modificér ikke armaturet på nogen måde.
- Sørg for, at alle forbindelser er sikre og korrekt isolerede.
- This product is designed for indoor use only and is not water resistant. Do not install in areas where it may be exposed to direct water.
- Se ikke direkte ind i LED-lyskilden, når den er tændt.
Pakkens indhold
Kontroller, at alle komponenter er til stede og ubeskadigede før installation.
- LED Vanity Bar (Base and Shade pre-assembled)
- Monteringsudstyr (skruer, trådmøtrikker osv.)
- Instruktionsmanual
Image: The product packaging for the Origin21 LED Vanity Bar, displaying key features such as motion sensing, adjustable white light (2700K-6500K), continuous dimming, and dimensions (24 in x 3.56 in x 5 in). The packaging also highlights a 5-year limited warranty and integrated LED technology.
Produktspecifikationer
| Feature | Specifikation |
|---|---|
| Modelnummer | 5742833 |
| Dimensioner (L x B x H) | 24 tommer x 3.56 tommer x 5 tommer (60.96 cm x 9.04 cm x 12.7 cm) |
| Wattage | 25W Maks |
| Lumen output | 1583 Lumen |
| Farvetemperatur | Adjustable White Light (2700K - 6500K) |
| Dæmpningsområde | 10% - 100% Continuous Dimming |
| Særlige funktioner | Motion Sensing, Adjustable Color Temperature, Dimmable |
| Strømkilde | Elektrisk (120 volt) |
| Materiale | Acrylic (Shade), Matte Black Finish |
| Indendørs/Udendørs brug | Kun indendørs |
| Vægt | 3 pund |
Installationsvejledning
Before you begin, ensure the power is turned off at the circuit breaker.
- Forbered monteringsoverfladen: Ensure the electrical box is securely mounted and accessible.
- Fastgør monteringsbeslag: Fastgør monteringsbeslaget til el-boksen med de medfølgende skruer.
- Ledningsforbindelser:
- Tilslut den grønne eller bare kobberjordledning fra armaturet til jordledningen fra el-boksen.
- Connect the white (neutral) wire from the fixture to the white (neutral) wire from the electrical box.
- Connect the black (hot) wire from the fixture to the black (hot) wire from the electrical box.
- Secure all wire connections with wire nuts and electrical tape.
- Monter armaturet: Juster forsigtigt armaturet med monteringsbeslaget, og fastgør det med de medfølgende skruer. Sørg for, at ingen ledninger kommer i klemme.
- Gendan strøm: Tænd for strømmen igen ved afbryderen.
Image: An installed Origin21 LED Vanity Bar, showcasing its sleek design and the integrated night light function, which activates via motion sensing. The main light provides bright, adjustable illumination.
Betjeningsvejledning
Hovedlysbetjening:
The main light is controlled by a standard wall switch. Flip the switch to turn the light ON or OFF.
Adjusting Color Temperature (2700K-6500K):
To change the color temperature from warm white (2700K) to cool white (6500K), rapidly toggle the wall switch OFF and ON. Each toggle will cycle through the available color temperatures. Stop at your desired setting.
Dimming (10%-100%):
This fixture supports continuous dimming. Use a compatible dimmer switch (sold separately) to adjust the brightness from 10% to 100%.
Bevægelsessensor natlampe:
The integrated night light function activates automatically when motion is detected in low-light conditions. It provides a soft, ambient glow for convenience and safety during nighttime hours. The motion sensor is located on the fixture itself.
Billede: En detaljeret view of the Origin21 LED Vanity Bar, emphasizing its adjustable white light capability, which ranges from 2700K (warm) to 6500K (cool). This image also shows the sleek matte black finish and white acrylic shade.
Pleje og vedligeholdelse
- Rensning: Always turn off power before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or acrylic shade.
- lysdioder: Den integrerede LED-lyskilde er designet til lang levetid og kræver ikke udskiftning.
- Inspektion: Undersøg regelmæssigt armaturet for tegn på skader eller løse forbindelser.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lyset tændes ikke. | Ingen strømforsyning; Løse ledninger; Defekt afbryder. | Kontroller afbryderen; Verificer, at alle ledningsforbindelser er sikre; Test eller udskift afbryderen. |
| Night light not activating. | Sufficient ambient light; Motion sensor obstructed or faulty. | Ensure area is dark enough for sensor activation; Clear any obstructions from the sensor; Contact support if issue persists. |
| Lyset flimrer eller dæmpes uventet. | Inkompatibel lysdæmper; Løs ledningsføring. | Ensure a compatible LED dimmer switch is used; Check wire connections. |
| Kan ikke ændre farvetemperaturen. | Incorrect toggling speed. | Ensure rapid toggling of the wall switch (OFF-ON) to cycle through color temperatures. |
Garanti og support
This Origin21 LED Vanity Bar is covered by a 5 års begrænset garanti fra købsdatoen. Denne garanti dækker fejl i materialer og udførelse ved normal brug.
For warranty claims, technical support, or any questions regarding your product, please contact Origin21 customer service. Please have your model number (5742833) and proof of purchase ready.
Kontaktoplysninger (f.eks. website, phone number) would typically be provided here by the manufacturer.
