Yaheetech 614932B

Yaheetech Queen Upholstered Bed Frame with Adjustable Headboard and 3 Storage Drawers, Model 614932B

Instruktionsmanual

Indledning

This manual provides detailed instructions for the assembly, operation, and maintenance of your Yaheetech Queen Upholstered Bed Frame with Adjustable Headboard and 3 Storage Drawers. Please read this manual thoroughly before assembly and retain it for future reference. Proper assembly and care will ensure the longevity and safe use of your product.

Sikkerhedsoplysninger

Af hensyn til din sikkerhed og for at forhindre skader på produktet, bedes du følge følgende retningslinjer:

Pakkens indhold

Før montering påbegyndes, skal du kontrollere, at alle nedenstående komponenter er til stede og ubeskadigede. Hvis der mangler eller er beskadigede dele, bedes du kontakte kundesupport.

Diagram showing all parts included in the Yaheetech Queen Bed Frame package
Billede 1: eksploderede view of all components and hardware. This image illustrates the various parts and fasteners included in the package, essential for assembly.

Refer to the included installation manual for a detailed list of parts and hardware.

Opsætning og montering

Følg disse trin omhyggeligt for korrekt montering. Det anbefales at være to personer til monteringen.

Trin 1: Forbered området

Clear a spacious area for assembly. Lay out all components on a soft, clean surface to prevent scratches.

Step 2: Assemble the Headboard

Attach the headboard support legs to the upholstered headboard panel. Ensure all bolts are finger-tight at this stage.

Close-up of the adjustable headboard mechanism with screws
Billede 2: Detail of headboard height adjustment. This image shows the screw points for adjusting the headboard to one of three height settings: 36.2", 38.6", or 41".

The headboard height is adjustable to three positions: 36.2", 38.6", and 41". Select the desired height and secure the bolts firmly.

Step 3: Construct the Bed Frame Sides

Connect the side rails to the headboard and footboard. Ensure the connections are secure before proceeding.

Step 4: Install the Slats

Place the wooden slats onto the designated support beams. Attach the plastic caps to the outer slats and then fix the slats on both sides of the bed frame.

Instructions for attaching plastic parts to slats and fixing slats to the bed frame
Billede 3: Slat installation guide. This image demonstrates how to attach the plastic components to the outer slats and secure the slats within the bed frame.

Trælamelsystemet eliminerer behovet for en boxmadras.

Trin 5: Saml og indsæt opbevaringsskuffer

Assemble the three wire netting drawers according to the separate drawer assembly instructions. Once assembled, insert them into the designated spaces under the bed frame. The drawers are equipped with rollers for easy access.

Image showing the three wire netting storage drawers pulled out from under the bed
Billede 4: Three-drawer storage design. This image highlights the three pull-out wire netting drawers, providing convenient storage space.
Diagram showing the clearance between the bed frame and a nightstand for drawer access
Billede 5: Drawer clearance illustration. This image indicates a 21.5" clearance, ensuring sufficient space for nightstands and easy access to the storage drawers.

Ensure there is at least 21.5 inches of clearance for nightstands to allow full access to the drawers.

Trin 6: Endelig tilspænding

Once all components are in place, systematically tighten all bolts and screws using the provided tools. Do not overtighten.

Operation

Brug af opbevaringsskuffer

The three wire netting drawers are designed for convenient storage of bedding, clothing, or other bedroom essentials. Gently pull the drawers out using the integrated handles. Push them back in until they are fully recessed under the bed frame.

Justering af hovedgærdet

To adjust the headboard height, loosen the bolts connecting the headboard to its support legs. Raise or lower the headboard to one of the three available positions (36.2", 38.6", or 41") and re-tighten the bolts securely.

Vedligeholdelse og pleje

Fejlfinding

ProblemMulig årsagLøsning
Sengerammen er vaklende eller ustabil.Løse bolte eller forkert montering.Review assembly instructions. Tighten all bolts and screws securely. Ensure all parts are correctly aligned.
Skufferne glider ikke gnidningsløst.Debris in rollers or misaligned drawers.Clean rollers and tracks. Ensure drawers are inserted correctly and not overloaded.
Knirkende lyde.Løse forbindelser eller friktion mellem dele.Tighten all bolts. Apply a small amount of lubricant (e.g., silicone spray) to contact points if necessary, avoiding upholstered areas.

If you encounter issues not listed here or require further assistance, please contact Yaheetech customer support.

Specifikationer

Diagram showing the dimensions of the Yaheetech Queen Bed Frame and its components
Billede 6: Product dimensions and weight capacity. This diagram provides detailed measurements for the bed frame, headboard, and storage drawers, along with the maximum weight capacity of 800 lbs.
FeatureDetalje
Modelnummer614932B
StørrelseDronning
Produktmål (L x B x H)83 cm x 62.5 cm x 41 cm
Justerbar sengegavl i højden36.2", 38.6", 41"
MaterialeWood, PU Leather, Steel Metal Frame
FarveBeige
Vægt kapacitet800 lbs (363 kg)
Varens vægt94.4 pund
Montering påkrævetJa
Inkluderede komponenterHeadboard, Installation Manual, Slats, 3 Storage Drawers

Garanti og support

For warranty information or technical support, please refer to the contact details provided in your purchase documentation or visit the official Yaheetech webwebsted.

Fabrikant: Yaheetech

Webwebsted: Yaheetechs officielle butik

Relaterede dokumenter - 614932B

Preview Yaheetech sengestel monteringsvejledning
Omfattende samlevejledning til Yaheetech queensize metalplatformseng med polstret hovedgærde. Indeholder deleliste, trinvise instruktioner og sikkerhedsoplysninger.
Preview Yaheetech 613629 (Fuld) Monteringsvejledning til sengestel
Detaljeret monteringsvejledning til Yaheetech 613629 (Full) sengestel, inklusive stykliste og trinvis vejledning.
Preview Yaheetech Queen Size polstret sengramme monteringsvejledning
Omfattende vejledning til samling af din Yaheetech Queen Size polstrede sengestel. Indeholder deleliste, trinvise instruktioner og vigtige sikkerhedsoplysninger.
Preview Yaheetech Queen Upholstered Bed Frame Monteringsvejledning og vejledning
Detaljeret monteringsvejledning til Yaheetech Queen Upholstered Bed Frame. Indeholder deleliste, trinvis vejledning og vigtige sikkerhedsoplysninger. Model 613777.
Preview Yaheetech 614279 Mørkegrå 140x200cm Dobbeltsengramme Samlevejledning
Omfattende samlevejledning til Yaheetech 614279 (960274) mørkegrå 140x200 cm dobbeltsengstel. Indeholder en detaljeret delliste, trinvise instruktioner og vigtige sikkerhedsforanstaltninger.
Preview Yaheetech metal queensize sengsramme monteringsvejledning (model nr. 611085)
Detaljeret monteringsvejledning til Yaheetech metal queensize-sengramme (modelnr. 611085), inklusive deleliste, sikkerhedsadvarsler og trinvis vejledning til en problemfri opsætning.