FOTING 13" sandfilterpumpe brugermanual

1. Introduktion

Thank you for choosing the FOTING 13" Sand Filter Pump. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your new pool filter pump. Designed for above-ground pools up to 13,000 gallons, this system ensures crystal-clear water through powerful filtration and a versatile 6-way valve.

Figure 1.1: FOTING 13" Sand Filter Pump and included accessories.

Figure 1.2: Visual representation of pool water clarity before and after using the FOTING sand filter pump.

2. Vigtige sikkerhedsoplysninger

Please read all safety warnings and instructions carefully before installation and operation to prevent injury or damage.

• ADVARSEL: Denne pumpe er kun blevet evalueret til brug med vand. Må ikke anvendes med andre væsker.
• ADVARSEL: Risk of electric shock. Do not plug into power while standing on a wet or damp surface. Always ensure your hands and the area are dry before handling electrical components.
• ADVARSEL: For at reducere risikoen for elektrisk stød, må du kun tilslutte til en korrekt jordet stikkontakt.
• ADVARSEL: To reduce risk of electric shock, refer to this instruction manual for proper installation procedures.
• ADVARSEL: Install only on a circuit protected by a Ground Fault Circuit Interrupter (GFCI).
• Afbryd altid strømmen, før du udfører vedligeholdelse eller service på pumpen.
• Hold børn og uautoriserede personer væk fra pumpen og poolområdet under drift.
• Ensure all connections are secure and leak-free before starting the pump.

Figure 2.1: Control panel displaying important safety warnings.

3. Komponenter inkluderet

The following components are typically included with your FOTING 13" Sand Filter Pump:

• 1 * Brugervejledning
• 1 * Garantikort
• 1 * Pressure Gauge
• 1 * Drain Piece
• 1 * Pair of Flange Clamps
• 1 * O-ring
• 1 * Allen Wrench
• 1 * NPT 1-1/2 Female Connectors
• 1 * Sealing Tape
• 1 * Hose Clamps
• 1 * Sand Cover
• 1 * Sylphon Bellows
• 1 * Filter Assembly
• 1 * Base
• 1 * Valve Head Assembly
• 1 * Cylinder
• 1 * Screws & Nuts

Figure 3.1: List of included components and overall product dimensions.

4. Opsætning og installation

Follow these steps to properly set up your FOTING sand filter pump:

1. Placering: Place the pump on a firm, level surface near your above-ground pool. Ensure it is protected from direct sunlight and harsh weather conditions.
2. Assemble the Base and Tank: Securely attach the filter tank to the base using the provided screws and nuts.
3. Tilføj filtermedie: Remove the sand cover from the top of the filter tank. Carefully add the recommended amount of filter sand (up to 66 lbs) or filter balls (200g included) into the tank. Ensure the standpipe is centered during this process.
4. Install Valve Head: Place the 6-way valve head assembly onto the top of the tank, aligning it with the standpipe. Secure it with the flange clamp and O-ring, ensuring a tight seal.
5. Tilslut slanger: Connect the pump's inlet and outlet ports to your pool's skimmer and return lines using 1.5-inch PVC hoses and hose clamps. Sørg for, at alle forbindelser er tætte for at forhindre lækager.
6. Fill Pump with Water (Priming): Before initial use, fill the pump's large filter basket with water to prime the system. This helps ensure proper water flow and prevents dry running.
7. Elektrisk tilslutning: Connect the pump to a properly grounded GFCI-protected electrical outlet.

Figure 4.1: Illustration of connecting fittings for the pump to the pool.

Figure 4.2: Proper placement and initial setup of the sand filter pump.

5. Betjeningsvejledning

5.1. 6-Way Valve Functions

The 6-way valve allows for various operational modes. Always turn off the pump before changing the valve position to prevent damage.

• 1. FILTER: Normal filtering mode. Water passes through the filter media, and clean water returns to the pool.
• 2. BACKWASH: Reverses water flow through the filter to clean the filter media. Water is discharged through the waste port. Use when pressure gauge reads high.
• 3. RINSE: Used after backwashing to flush out any remaining debris from the filter lines before returning to filter mode. Water is discharged through the waste port.
• 4. WASTE: Bypasses the filter and directly removes water from the pool, typically used for vacuuming heavy debris to waste or lowering pool water level.
• 5. CLOSED: Stops all water flow to and from the filter. Betjen aldrig pumpen med ventilen i LUKKET position.
• 6. RECIRCULATE: Mixes pool water without filtering, bypassing the filter media. Useful for chemical distribution.

Figur 5.1: Overview of the 6-way valve functions for the sand filter system.

Figure 5.2: Detailed descriptions for each setting on the 6-way valve.

5.2. Timer Settings and Control Panel

The FOTING pump features a 24-hour dual-mode intelligent timing system for convenient operation.

• Kontrolpanel: The digital display shows the current timer setting. Buttons allow for power on/off, timer adjustment, and mode selection.
• Enkeltcyklustilstand: The pump operates for a set duration once per 24-hour period.
• Kontinuerlig cyklustilstand: The pump operates continuously until manually turned off or a new timer setting is applied.
• Indstilling af timeren: Use the timer button to cycle through 10 time settings or select continuous operation.

Figure 5.3: The pump's control panel with digital display and timing options.

Figure 5.4: Explanation of the two intelligent timing modes available.

6. Vedligeholdelse

Regular maintenance ensures the longevity and optimal performance of your FOTING sand filter pump.

• Backwashing and Rinsing: Perform backwashing and rinsing when the pressure gauge reads 5-10 PSI above its clean operating pressure, or when water flow decreases. This typically needs to be done weekly or bi-weekly depending on pool usage and debris.
• Rengøring af filterkurven: Periodically check and clean the pump's filter basket (strainer) to remove large debris. Turn off the pump, release pressure, and open the clear cover to access the basket.
• Vinterklargøring: Before freezing temperatures, drain all water from the pump and filter tank. Store the pump in a dry, protected area. Remove the pressure gauge and store it indoors.
• Inspicer slanger og forbindelser: Regularly check hoses for cracks or leaks and ensure all clamps and connections are secure.

Figure 6.1: The pump's filter basket, easily accessible for cleaning debris.

Figure 6.2: The clear cover allows for visual observation of the filter basket's condition.

7. Fejlfinding

If you encounter issues with your FOTING sand filter pump, refer to the following common problems and solutions:

8. Produktspecifikationer

• Model: FT-CLP5503
• Systemets flowhastighed: Maks. 3800 GPH
• Hestekræfter: 1 HK
• Max hoved: 44 fod
• Anbefalet poolstørrelse: Op til 13,000 gallons
• Filter Tank Size: 13 tommer
• Sandkapacitet: 66 lbs
• Filter Ball Included: 200 g
• Ventiltype: 6-vejs ventil
• Strømkilde: AC
• Materiale: Rustfrit stål, polypropylen (PP)
• Stil: Over Jorden
• Varens vægt: 25.4 pund
• Pakkedimensioner: 21.25 x 17.32 x 13.38 tommer
• Fabrikant: FOTING

Figure 8.1: Key performance and capacity specifications.

9. Garanti og kundesupport

The FOTING 13" Sand Filter Pump is backed by a tre års garanti, ensuring peace of mind and customer satisfaction. For any inquiries, technical assistance, or warranty claims, please contact the seller, Blue Fins, through the platform where the product was purchased. Please have your model number (FT-CLP5503) and purchase details ready when contacting support.