Casio SGW100-seriens digitalur og kompas, brugsanvisning

1. Introduktion og overview

This manual provides detailed instructions for the setup, operation, and maintenance of your Casio SGW100 Series Digital Watch, Model SGW-100-1V. This robust timepiece is equipped with twin sensors for digital compass and thermometer readings, 200-meter water resistance, a 1/100-second stopwatch, world time, and multiple alarm functions, making it suitable for various outdoor activities and daily use.

Figur 1: Forside view of the Casio SGW-100-1V Digital Watch, displaying time, date, and compass bezel.

2. Nøglefunktioner

• Twin Sensor: Integrated digital compass and thermometer for environmental data.
• Vandtæthed: 200 meters (660 feet), suitable for swimming and diving.
• Stopur: 1/100-second stopwatch with a measuring capacity of 59'59.99".
• Verdenstid: Displays current time in major cities and specific areas around the world.
• Alarmer: Multiple daily alarms with snooze function.
• Automatisk kalender: Forprogrammeret indtil år 2099.
• Lav temperaturbestandig: Operates reliably in cold conditions.
• Illuminator: Backlight for easy reading in low light conditions.

3. Opsætning og indledende konfiguration

3.1 Indstilling af tid og dato

1. I tidsvisningstilstand skal du trykke på og holde TILPASSE knappen (øverst til venstre), indtil bykoden begynder at blinke.
2. Brug SØGE button (bottom right) to select your desired city code.
3. Tryk på MODE button (bottom left) to cycle through the settings: DST (Daylight Saving Time), 12/24-hour format, seconds, hour, minute, year, month, and day.
4. Brug SØGE knappen (nederst til højre) for at ændre den blinkende værdi.
5. Når alle indstillinger er korrekte, skal du trykke på TILPASSE knappen for at forlade indstillingstilstanden.

3.2 Setting World Time

1. Fra tidsvisningstilstand skal du trykke på MODE button to navigate to World Time Mode.
2. Brug SØGE button (bottom right) to scroll through different city codes/time zones.
3. Uret viser det aktuelle klokkeslæt for den valgte by.

3.3 Indstilling af alarmer

1. Fra tidsvisningstilstand skal du trykke på MODE knappen, indtil du når Alarmtilstand.
2. Brug SØGE button (bottom right) to select one of the five available alarms (AL1 to AL5) or the Snooze Alarm (SNZ).
3. Tryk og hold på TILPASSE knappen (øverst til venstre), indtil alarmtidspunktet begynder at blinke.
4. Brug MODE knappen for at skifte mellem time- og minutindstillinger.
5. Brug SØGE knappen for at ændre den blinkende værdi.
6. Tryk på TILPASSE knappen for at bekræfte og afslutte.
7. To turn an alarm on/off, select the alarm and press the TILPASSE knap.

4. Betjening af uret

4.1 Digital Compass

1. Fra tidsvisningstilstand skal du trykke på COMP button (bottom right) to enter Compass Mode.
2. Hold the watch level and away from magnetic interference (e.g., large metal objects, other electronic devices).
3. The watch will display the current direction (e.g., N, NE, SW) and a graphic direction pointer.
4. For accurate readings, perform a bidirectional calibration as described in the full user manual if needed.

4.2 Termometer

1. The thermometer reading is displayed in Compass Mode, alongside the compass direction.
2. For an accurate ambient temperature reading, remove the watch from your wrist for at least 20-30 minutes to avoid body heat interference.
3. The display range is -10 to 60 ℃ (14 to 140 ℉), with a display unit of 0.1 ℃ (0.2 ℉).

4.3 Stopur

1. Fra tidsvisningstilstand skal du trykke på MODE button to navigate to Stopwatch Mode.
2. Tryk på SØGE button (bottom right) to start and stop the stopwatch.
3. Tryk på TILPASSE knappen (øverst til venstre) for at nulstille stopuret.
4. The stopwatch measures up to 59 minutes, 59.99 seconds.

4.4 Nedtællingstimer

1. Fra tidsvisningstilstand skal du trykke på MODE button to navigate to Timer Mode.
2. Tryk og hold på TILPASSE button (top left) to set the countdown start time.
3. Brug MODE button to switch between hour and minute settings, and the SØGE button to change the values.
4. Trykke TILPASSE for at bekræfte.
5. Tryk på SØGE button to start and stop the countdown.

4.5 Backlight (Illuminator)

• Tryk på LYS button (top right) to illuminate the display for a few seconds.

5. Vedligeholdelse

5.1 Vandtæthed

• The watch is water resistant to 200 meters. This means it is suitable for recreational scuba diving.
• Do not operate buttons while the watch is wet or submerged in water to prevent water ingress.
• After exposure to saltwater, rinse the watch thoroughly with fresh water and wipe it dry.

5.2 Udskiftning af batteri

• The watch uses one CR2025 battery, with an approximate life of 3 years.
• Battery replacement should be performed by a qualified technician to ensure proper water resistance sealing.

5.3 Rengøring

• Wipe the watch case and band with a soft, dry cloth.
• For resin bands, use a soft brush and soapy water to remove dirt, then rinse and dry thoroughly.

6. Fejlfinding

• Forkert tidspunkt/dato: Ensure the city code is correctly set for your region and DST (Daylight Saving Time) is adjusted if applicable. Refer to Section 3.1.
• Inaccurate Compass Readings: Calibrate the compass away from magnetic interference. Refer to the full user manual for detailed calibration steps.
• Unøjagtige temperaturmålinger: Remove the watch from your wrist for 20-30 minutes to allow it to acclimate to ambient temperature. Body heat significantly affects readings when worn.
• Display is Dim/Blank: The battery may be low or depleted. Replace the battery as per Section 5.2.
• Knapper reagerer ikke: Ensure the watch is not in a special mode that locks buttons. If wet, dry the watch thoroughly before operating buttons.

7. Specifikationer

8. Garanti og support

Your Casio SGW-100-1V watch is covered by a manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions, including warranty period and service procedures. For further assistance or detailed inquiries, please visit the official Casio support webwebsted eller kontakt deres kundeserviceafdeling.

Figure 2: The Casio SGW-100-1V watch displayed on a wrist, showcasing its fit and digital display.

Figure 3: The packaging box for Casio products, typically containing the watch and documentation.