MeesMeek Digital Visuel Timer (Model 6209SW) Brugermanual

1. Introduktion

Thank you for choosing the MeesMeek Digital Visual Timer. This device is designed to assist with time management for various activities, including cooking, studying, workouts, and meetings. It features a clear VA display, adjustable volume and brightness, and a rechargeable battery, offering both countdown and count-up functionalities for up to 11 hours and 59 minutes.

2. Produktet er slutview

2.1 Nøglefunktioner

Digital Visual Display: Large VA display with a distinct visual segment for clear time indication.
Extended Time Range: Programmable for up to 11 hours and 59 minutes.
Countdown & Count-up Modes: Functions as both a countdown timer and a stopwatch.
Hukommelsesfunktion: Recalls the last countdown setting for convenience.
Genopladeligt batteri: Built-in 1200 mAh battery, rechargeable via USB-C.
Justerbar lysstyrke: Two brightness levels (ECO and Bright) for various environments.
Justerbar alarmvolumen: Two volume options (Loud: 85-95dB, Soft: 75-85dB) and a Mute mode with flashing display.
Alsidig placering: Magnetic back for attachment to metal surfaces or a built-in kickstand for tabletop use.

2.2 Komponenter

Familiarize yourself with the main components of your MeesMeek Digital Visual Timer:

Diagram showing the MeesMeek Digital Visual Timer with labels for its components: Multifunction Knob, Low Battery Indicator, Bright/Energy Saving button, Loud/Soft/Mute button, On/Off Switch, USB-C Input, and Rechargeable Battery. — **Figur 1:** MeesMeek Digital Visual Timer Components. This image displays the timer from a side-rear angle, highlighting the multifunction knob, low battery indicator, brightness/energy saving button, volume/mute button, on/off switch, USB-C input, and the rechargeable battery feature.

Multifunktionsknap: Located on the side, used for setting time and starting/stopping the timer.
Brightness/Energy Saving Button: Adjusts display brightness between ECO and Bright modes.
Volume/Mute Button: Cycles through Loud, Soft, and Mute alarm settings.
Tænd/sluk-knap: Tænder eller slukker for enheden.
USB-C-indgang: Til opladning af det interne batteri.
VA Display: Main screen showing time and visual progress.
Magnetisk bagside: Allows attachment to metal surfaces.
Stativ: Til bordplacering.

3. Opsætning

3.1 Indledende opladning

Before first use, ensure the timer is fully charged. Connect the provided USB-C cable to the timer's USB-C input and plug the other end into a 5V USB power adapter (not included) or a compatible USB port.

Image showing the MeesMeek Digital Visual Timer displaying a low battery icon and two modes: ECO and Bright. The timer is shown charging via a USB-C cable. — **Figur 2:** Charging and Power Saving Mode. This image illustrates the timer's low battery indicator and the two brightness modes (ECO and Bright). It also shows the USB-C charging port in use.

A low battery indicator will appear on the display when charging is required. The display will show a charging icon. Once fully charged, the icon may change or disappear depending on the model.

3.2 Tænd/sluk

Locate the On/Off switch on the side of the timer. Slide the switch to the "ON" position to power on the device. To conserve battery when not in use for extended periods, slide the switch to "OFF".

4. Betjeningsvejledning

4.1 Setting the Timer (Countdown Mode)

Sørg for, at timeren er tændt.
Rotate the multifunction knob on the side to set the desired time. Turning it clockwise increases the time, and counter-clockwise decreases it. The display will show the set time in hours (H), minutes (M), and seconds (S).
Once the desired time is displayed, press the multifunction knob to start the countdown. The visual segment on the display will begin to decrease, indicating the elapsed time.
To pause the countdown, press the multifunction knob again. Press it once more to resume.
When the countdown reaches zero, the alarm will sound (unless muted) and the display will flash. Press any button to stop the alarm.
The timer remembers your last countdown setting. After an alarm, you can press any button to recall the previous setting for quick reuse.

Image demonstrating how to set the MeesMeek Digital Visual Timer by turning the side wheel. Examples of setting times for 15 minutes, 1 hour, 6 hours, 30 minutes, 3 hours 30 minutes, and 11 hours 59 minutes are shown with corresponding food items. — **Figur 3:** Easy Time Setting. This image illustrates the simple process of setting the timer by rotating the side knob, showing various time settings from minutes to hours.

4.2 Using as a Stopwatch (Count-up Mode)

Sådan bruger du timeren som stopur:

Ensure the timer is powered on and the display shows "00:00" (or reset it to zero by rotating the knob to 00:00 and pressing it).
Press the multifunction knob to start the count-up. The timer will begin counting upwards from 00:00.
To pause the stopwatch, press the multifunction knob. Press it again to resume.
To reset the stopwatch, hold the multifunction knob for a few seconds until the display returns to 00:00.

Image showing the MeesMeek Digital Visual Timer in both countdown mode (11 hours 59 minutes) and count-up mode (00 hours 01 minute). The countdown mode is shown with a person on a treadmill, and count-up mode with a teacher and students in a classroom. — **Figur 4:** Countdown and Count-up Functionality. This image demonstrates the timer's ability to perform both countdowns (up to 11 hours 59 minutes) and count-ups, suitable for various activities like exercise or classroom management.

4.3 Justering af alarmlydstyrke

The timer offers three alarm settings: Loud, Soft, and Mute.

Press the Volume/Mute button (usually labeled with a speaker icon) to cycle through the options.
Højt: 85-95dB.
Blød: 75-85dB.
Stum: The display will flash when the timer reaches zero, providing a silent alert.

Image illustrating the alarm volume adjustment feature of the MeesMeek Digital Visual Timer. It shows the timer with options for Loud (85-95dB), Soft (75-85dB), and Mute (display blink) settings, with corresponding usage scenarios. — **Figur 5:** Alarm Volume Settings. This image details the three alarm volume options: Loud, Soft, and Mute, allowing users to choose the appropriate alert level for their environment.

4.4 Justering af skærmens lysstyrke

The timer has two brightness levels to suit different lighting conditions and save energy.

Press the Brightness/Energy Saving button (usually labeled with a light bulb icon) to switch between "ECO" (energy-saving) and "Bright" modes.
In ECO mode, the display will automatically turn off after 15 seconds of inactivity to conserve battery.

4.5 Placeringsmuligheder

The MeesMeek Digital Visual Timer offers flexible placement:

Magnetisk fastgørelse: The strong magnet on the back allows it to be securely attached to metal surfaces like refrigerators or whiteboards.
Bordstativ: Utilize the built-in kickstand to place the timer upright on any flat surface.

Image showing three ways to place the MeesMeek Digital Visual Timer: attached to a refrigerator with its strong magnet, standing upright on a counter, and using its kickstand on a table. — **Figur 6:** Versatile Placement Options. This image demonstrates the three convenient ways to position the timer: magnetic attachment, upright on a surface, or using its integrated stand.

5. Vedligeholdelse

Rensning: Tør timeren af med en blød, tør klud. Brug ikke slibende rengøringsmidler, og nedsænk ikke enheden i vand.
Opbevaring: Opbevar timeren på et køligt, tørt sted, når den ikke er i brug.
Batteripleje: To prolong battery life, avoid fully discharging the battery frequently. Recharge when the low battery indicator appears.

6. Fejlfinding

Problem	Mulig årsag	Løsning
Timeren tænder ikke.	Batteriet er afladet.	Connect the timer to a 5V USB-C power source and charge it. Ensure the On/Off switch is in the "ON" position.
Skærmen er svag eller ikke synlig.	Low battery; Brightness setting is too low.	Charge the timer. Press the Brightness/Energy Saving button to switch to "Bright" mode.
Alarmen lyder ikke.	Timer is in Mute mode; Volume is set to Soft.	Press the Volume/Mute button to cycle through Loud or Soft volume settings.
Timer does not respond to knob rotation.	Timer is paused or in an unresponsive state.	Press the multifunction knob to ensure it's not paused. If unresponsive, try turning the device off and on again.

If you encounter issues not listed here, please refer to the support information in Section 8.

7. Specifikationer

Mærke: MeesMeek
Modelnummer: 6209SW
Farve: Hvid
Materiale: Acrylonitril-butadienstyren
Produktdimensioner: 1.37" D x 3.82" B x 3.55" H
Skærmstørrelse: 3.82 tommer
Batteri: 1200 mAh (Rechargeable, 1 C battery included)
Opladningsindgang: 5V USB-C
Alarmvolumen: Loud (85-95dB), Soft (75-85dB), Mute (display flash)
Max Time Setting: 11 timer 59 minutter
Varens vægt: 8.4 ounce

8. Garanti og support

For warranty information or technical support, please contact MeesMeek customer service through the retailer where the product was purchased or visit the official MeesMeek store online.

MeesMeek Store: Visit MeesMeek Store

Bemærk: Der var ingen officielle sælgervideoer tilgængelige til indlejring i denne manual.

MeesMeek 6209SW