FLEXISPOT 42 inch Desk Converter Instruction Manual

1. Introduktion

This manual provides comprehensive instructions for the assembly, operation, and maintenance of your FLEXISPOT 42 inch Desk Converter. This height-adjustable riser is designed to transform your traditional desk into an active sit-stand workstation, promoting varied postures for enhanced comfort and productivity.

The unique U-shaped design expands the keyboard workspace, accommodating dual monitors and a laptop, along with a wide keyboard tray.

Image 1.1: FLEXISPOT 42 inch Desk Converter in a typical office setup.

2. Sikkerhedsoplysninger

• Always ensure the desk riser is placed on a stable, flat surface.
• Overskrid ikke den maksimale vægtkapacitet: 33 lbs (15 kg) for the desktop og 6.6 lbs (3 kg) for the keyboard tray. Exceeding these limits can compromise stability and lead to damage or injury.
• Hold hænder og fingre væk fra bevægelige dele under højdejustering for at undgå klemning.
• Distribute weight evenly across the desktop to maintain balance.
• Sørg for, at alle skruer og fastgørelseselementer er forsvarligt spændt før brug, og kontroller regelmæssigt for løse dele.

3. Pakkens indhold

Før montering skal du kontrollere, at alle komponenter er til stede og ubeskadigede. Hvis der mangler eller er beskadigede dele, bedes du kontakte kundesupport.

• Hovedskrivebordskonverteringsenhed
• Tastaturbakke
• Assembly Hardware (screws, brackets)
• Instruktionsmanual (dette dokument)

4. Opsætning og montering

The FLEXISPOT Desk Converter is designed for quick assembly. Only the keyboard tray requires attachment.

Nødvendige værktøjer:

• Skruetrækker (medfølger ikke)

Monteringstrin:

1. Carefully remove all components from the packaging. Place the main desk converter unit on a stable, flat surface.
2. Identify the keyboard tray and its corresponding mounting brackets.
3. Align the keyboard tray brackets with the pre-drilled holes on the underside of the main desktop unit.
4. Secure the brackets to the desktop using the provided screws. Ensure they are tightened firmly but do not overtighten.
5. Attach the keyboard tray to the brackets using the remaining screws. Verify that the keyboard tray is level and stable.

Image 4.1: Illustration of keyboard tray attachment.

5. Betjeningsvejledning

The desk converter features a gas-spring lifting mechanism for smooth and effortless height adjustment.

Justering af højde:

1. Fjern eventuelle forhindringer omkring bordkonverteren.
2. Locate the adjustment lever, typically on the side of the desktop.
3. To raise the desk, gently squeeze the lever and lift the desktop to your desired height. The gas spring will assist the movement.
4. To lower the desk, gently squeeze the lever and apply downward pressure to the desktop. Guide it smoothly to your preferred sitting height.
5. Release the lever to lock the desk converter in position.

Image 5.1: Height adjustment range from 4.7 inches to 19.6 inches.

Image 5.2: Spacious two-tier design for monitors and keyboard.

6. Vedligeholdelse

Regelmæssig vedligeholdelse sikrer din bordkonverters levetid og optimale ydeevne.

• Rensning: Tør overflader af med en blød, damp klud. Undgå slibende rengøringsmidler eller barske kemikalier, der kan beskadige overfladen.
• Kontrol af fastgørelseselementer: Periodically inspect all screws and bolts, especially those securing the keyboard tray and the main frame. Tighten any loose fasteners to maintain stability.
• Mekanismekontrol: Ensure the lifting mechanism operates smoothly. If you notice any stiffness or unusual noises, contact support. Do not attempt to lubricate or disassemble the gas spring mechanism yourself.

7. Fejlfinding

If you encounter issues with your desk converter, refer to the following common problems and solutions:

• Desk Converter is Unstable or Wobbles:
  • Ensure the desk converter is placed on a completely flat and stable surface.
  • Verify that all assembly screws, particularly those for the keyboard tray and the base, are securely tightened.
  • Check that the weight on the desktop and keyboard tray does not exceed the specified capacity (33 lbs desktop, 6.6 lbs keyboard tray) and is evenly distributed.
  • A slight wobble may be noticeable at maximum height; this is normal for some adjustable risers.
• Vanskeligheder med at justere højden:
  • Ensure the adjustment lever is fully engaged when attempting to raise or lower the desk.
  • Check for any obstructions preventing the mechanism from moving freely.
  • Verify that the weight on the desktop is within the specified limits. Excessive weight can make adjustment difficult.
• Keyboard Tray Screws Do Not Fit or Come Loose:
  • Ensure you are using the correct screws for the keyboard tray attachment. Refer to the assembly instructions.
  • If screws consistently come loose, consider using slightly larger or coarser threaded screws of appropriate length, or apply a thread-locking compound (e.g., Loctite) if suitable for the material.
• Desktop Appears Slanted:
  • Check the underlying desk surface for levelness.
  • Inspect the desk converter's frame for any visible damage or bending. If damage is present, discontinue use and contact support.

8. Specifikationer

Detailed product specifications for the FLEXISPOT 42 inch Desk Converter.

Billede 8.1: Produktmål og lasteevne.

9. Garanti og support

The FLEXISPOT 42 inch Desk Converter comes with a Begrænset garanti. For specific details regarding warranty coverage, duration, and terms, please refer to the warranty card included with your product or visit the official FLEXISPOT webwebsted.

For technical assistance, troubleshooting not covered in this manual, or to inquire about replacement parts, please contact FLEXISPOT customer support directly. You can often find support contact information on the manufacturer's webwebsted eller via din købsplatform.

Visit the official FLEXISPOT Store for more information: FLEXISPOT Butik på Amazon