Vigtige sikkerhedsoplysninger
Please read and understand all instructions and safety warnings before assembly and use of this product. Failure to follow these instructions may result in injury or product damage.
- Do not attempt to lift or move the box spring when it is fully assembled.
- Følg altid samlevejledningen nøje for at forhindre ustabilitet eller sammenstyrtning.
- Be cautious of sharp edges and the folding design during assembly and use.
- Regularly inspect the box spring for any signs of wear or damage.
- Overskrid ikke den maksimale vægtkapacitet på 3500 lbs.
Pakkens indhold
Kontroller, at alle komponenter er til stede, før monteringen påbegyndes.
- Box Spring Frame Components
- Fabric Cover
- Installationsmanual
- Skruer
- Skruenøgle
Opsætning og montering
The MAF King Size Box Spring features a foldable design for easier setup. It is recommended that two adults assemble this product.
Nødvendige værktøjer:
- Included Wrench
- (Optional) Power screwdriver for faster assembly
Monteringstrin:
- Udpak komponenter: Carefully remove all parts from the packaging and lay them out on a clean, flat surface. Ensure all listed components are present.
- Fold rammen ud: The box spring frame comes in a folded configuration. Gently unfold the sections as shown in the diagram below. Ensure the triangular support designs lock into place.
- Sikre forbindelser: Align the frame sections and secure them using the provided screws and wrench. Ensure all connections are tightened securely to prevent wobbling or noise.
- Installer lameller: Place the metal slats into their designated positions on the frame. The U-shaped groove design helps secure each pole and support frame.
- Påfør stofbetræk: Once the frame is fully assembled and stable, carefully place the removable fabric cover over the box spring. The cover is designed for easy application and removal.
Figure 1: Assembly Steps for the MAF Box Spring.
Figure 2: Foldable Design and Easy Assembly Overview.
Figure 3: Key Structural Features: Round Corners, Triangular Support, and U-Shaped Grooves.
Betjeningsvejledning
The MAF Box Spring is designed to provide stable support for your mattress. It can be used with various mattress types, including innerspring, memory foam, and latex mattresses.
- Placering: Position the assembled box spring on a compatible bed frame or directly on the floor if desired. Ensure it is level and stable.
- Madrasplacering: Carefully place your mattress on top of the box spring. The box spring is designed to support mattresses up to 80"L x 76"W.
- Vægt kapacitet: The box spring is engineered to support up to 3500 lbs. Do not exceed this weight limit to maintain structural integrity and safety.
- Støjreduktion: The U-shaped groove design and seamless welding are intended to prevent structural distortion and squeaks, providing a quiet sleeping environment.
Figure 4: Proper Layering of Bed Components.
Vedligeholdelse og pleje
Proper maintenance ensures the longevity and performance of your MAF Box Spring.
- Rengøring af låget: The fabric cover is removable and washable. Remove it from the frame for cleaning as needed. Follow care instructions on the cover label if available, or wash with mild detergent and cold water, then air dry.
- Rengøring af ramme: Tør metalrammen af med en tør klud for at fjerne støv og snavs. Undgå at bruge skrappe kemikalier eller slibende rengøringsmidler.
- Regelmæssig inspektion: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary. Inspect the frame for any signs of bending, cracks, or damage.
- Moving the Box Spring: If you need to move the box spring, it is recommended to disassemble it first, especially if moving through narrow doorways or stairs, to prevent damage to the product or injury.
Fejlfinding
If you encounter any issues with your MAF Box Spring, refer to the following common solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Knirkende støj | Løse forbindelser eller ujævn placering. | Ensure all screws are tightly secured. Verify the box spring is placed on a flat, level surface. The U-shaped groove design is intended to minimize noise; if squeaking persists, re-check assembly. |
| Ustabilitet/Vinklen | Incomplete assembly or damaged components. | Re-check all assembly steps, ensuring triangular supports are engaged and all fasteners are tight. Inspect for any bent or damaged parts. |
| Mattress Sagging | Exceeded weight capacity or improper mattress support. | Ensure the combined weight of users and mattress does not exceed 3500 lbs. Verify the mattress is compatible with a box spring. |
Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | MAF |
| Modelnummer | MAF-MT33-10K |
| Størrelse | Konge |
| Produktdimensioner | 78.8 cm L x 75.5 cm B x 10 cm H |
| Kompatibel madrasstørrelse | 80 cm L x 76 cm B |
| Speciel funktion | Foldable Design, Round Corner Design, Triangular Support, U-Shaped Groove Design |
| Finish Type | Pulverlakeret |
| Inkluderede komponenter | Box Spring Frame, Fabric Cover, Installation Manual, Screws, Wrench |
| Produktplejevejledning | Wipe with Dry Cloth, Removable and Washable Fabric Cover |
| Montering påkrævet | Ja |
| Afstand til jord | 10 tommer |
| Varens vægt | 49.1 pund |
| Maksimal vægtkapacitet | 3500 lbs |
Figure 5: MAF Box Spring Size Chart.
Garanti og support
Specific warranty details for the MAF Box Spring are not provided within this manual. For warranty information, please refer to the product packaging or contact MAF customer support directly.
For further assistance, questions, or to report any issues, please visit the official MAF store or contact their customer service department.
